Toggle Nav
My Cart
Search
Advanced Search
All Category
All Category
Menu
Account

Shaft Collars

A set collar is a component that is used by attaching it to a shaft, etc., and is used to fix a sprocket or pulley by fastening it to the shaft. There are set collars that fix the shaft with screws and slit collars with a cut structure. The slit collar has the feature that the shaft is pressed and fixed by the surface, and the pressure is dispersed and the shaft is hard to be damaged. There are also variations in the material. For example, a set color made of stainless steel is suitable for food processing machinery and chemical machinery where water adhesion is expected.

Other Related Pages

  1. collar clamp diameter 12
  2. 62 22 bearing
  3. shaft collar
  4. shaft collar clamp
  5. shaft collars set screw
View : Grid List
Filter

Items 1 - 40 of 264

Page
Set Ascending Direction
  1. Set Collar Standard
    MonotaRO Set Collar Standard
    This is convenient when you want to adjust the position. * Do not use for anything other than its intended purpose.
    Surface Treatment  Black dyed  Material  S45C  Type  Standard 
    Rating:
    95%
    (88)
    from S$1.39
    Min. 2 days
  2. Standard Separated Collar Black Dyeing
    Iwata Mfg. Standard Separated Collar Black Dyeing
    A separate type color that can be attached and detached after machine assembly. Ideal for retrofitting and shaft parts that are difficult to disassemble.
    Type  separate  Material  S45C  Surface Treatment  Black dyeing (alkali coloring finish) 
    Rating:
    92%
    (12)
    from S$9.79
    Min. 2 days
  3. Standard Set Collar Black Dyed
    Iwata Mfg. Standard Set Collar Black Dyed
    This is convenient when you want to adjust the position at present or when it is difficult to machine a snap ring groove on the shaft. One side is chamfered by 30 ° to avoid interference with the outer ring of the bearing.
    Surface Treatment  Black dyeing (alkali coloring finish)  Material  S45C  Chamfer Diameter D1 (Φmm)  - 
    Rating:
    94%
    (37)
    from S$1.39
    Min. 2 days
  4. Standard Shaft Collar Type
    KANA (KATAYAMA CHAIN) Standard Shaft Collar Type
    Ideal for positioning idler sprockets and fixing bearing housings and shafts.
    Surface Treatment  Black dyed  Material  SS400 
    Rating:
    96%
    (22)
    from S$2.49
    Min. 2 days
  5. Standard Set Collar SUS304
    Iwata Mfg. Standard Set Collar SUS304
    This is convenient when you want to adjust the position at present or when it is difficult to machine a snap ring groove on the shaft. One side is chamfered by 30 ° to avoid interference with the outer ring of the bearing.
    Material  SUS304 
    Rating:
    80%
    (15)
    from S$3.49
    Min. 2 days
  6. Standard Set Collar Aluminum (A2017)
    Iwata Mfg. Standard Set Collar Aluminum (A2017)
    Material / Processing  Aluminum (A2017)  Type  Standard 
    Rating:
    96%
    (11)
    from S$2.19
    Min. 2 days
  7. Separate color D cut screw type
    Iwata Mfg. Separate color D cut screw type
    A set collar with a separate structure that is convenient when assembling and maintaining machines. A type with strong thrust and less scratches on the shaft. Various parts such as brackets can be attached using the D-cut surface.
    Type  separate 
    Rating:
    100%
    (1)
    from S$19.99
    Min. 2 days
  8. Standard Separated Collar SUS304
    Iwata Mfg. Standard Separated Collar SUS304
    A separate type color that can be attached and detached after machine assembly. Ideal for retrofitting and shaft parts that are difficult to disassemble.
    Type  separate  Material  SUS304 
    Rating:
    80%
    (4)
    from S$13.99
    Min. 2 days
  9. Set color stainless steel SUS
    KONISHI MFG (MIYOSHI) Set color stainless steel SUS
    RoHS Directive  10 substances  Type  Standard 
    Rating:
    100%
    (2)
    from S$3.89
    Min. 2 days
  10. Slit collar with 2 screw holes
    Iwata Mfg. Slit collar with 2 screw holes
    Since it is tightened on the surface, it has a strong thrust force and the shaft is not easily scratched. The most varied type in the series. Convenient for attaching brackets and plates and fixing sprockets.
    Rating:
    80%
    (4)
    from S$11.99
    Min. 2 days
  11. Standard Slit Collar Aluminum (A2017)
    Iwata Mfg. Standard Slit Collar Aluminum (A2017)
    Material / Processing  Aluminum (A2017) 
    Rating:
    88%
    (8)
    from S$5.39
    Min. 2 days
  12. Stainless Steel Shaft Collar Standard Type
    KANA (KATAYAMA CHAIN) Stainless Steel Shaft Collar Standard Type
    Ideal for positioning idler sprockets and fixing bearing housings and shafts.
    Surface Treatment  -  Included Accessories  2 set screws  Material  SUS304  Type  Standard 
    Rating:
    91%
    (9)
    from S$4.89
    Min. 2 days
  13. Standard slit color black dyed
    Iwata Mfg. Standard slit color black dyed
    It can be fixed without damaging the shaft. Ideal for slide shafts and places where the mounting position is changed frequently.
    Surface Treatment  Black dyeing (alkali coloring finish)  Material  S45C 
    Rating:
    100%
    (5)
    from S$6.49
    Min. 2 days
  14. set color
    Everon set color
    Easy to install. For fixing bearings, sprockets, etc.
    Type  Standard  Surface Treatment  Zinc plating 
    Rating:
    100%
    (4)
    from S$2.99
    Min. 2 days
  15. Standard set color Electroless nickel plating
    Iwata Mfg. Standard set color Electroless nickel plating
    A set collar that holds and fixes the shaft with a set screw. It can be used for simple positioning, etc., and is the most compact type in the series.
    Surface Treatment  Electroless nickel plating  Material  Iron (S45C)  Type  Standard 
    Rating:
    40%
    (1)
    from S$2.99
    Min. 2 days
  16. Separate color Normal Black dyed
    Iwata Mfg. Separate color Normal Black dyed
    RoHS Directive  10 substances  Applicable Standard  RoHS2  Material  S45C / Black dyed 
    Rating:
    92%
    (5)
    from S$11.99
    Min. 2 days
  17. Standard Separate Collar Aluminum (A2017)
    Iwata Mfg. Standard Separate Collar Aluminum (A2017)
    Material / Processing  Aluminum (A2017)  Type  separate 
    Rating:
    89%
    (7)
    from S$7.79
    Min. 2 days
  18. Set collar 2 hole type
    Iwata Mfg. Set collar 2 hole type
    A set collar that holds the shaft with a set screw to fix it. It can be used for simple positioning and is the most compact type in the series. Convenient for attaching brackets and plates and fixing sprockets.
    Type  Standard 
    Rating:
    100%
    (4)
    from S$3.89
    Min. 2 days
  19. Shaft Collar Slit Type
    KANA (KATAYAMA CHAIN) Shaft Collar Slit Type
    Optimal for positioning and fixing sprockets, timing pulleys, etc. It can be securely attached with the clamping effect.
    Included Accessories  1 bolt  Surface Treatment  Black dyed  Material  Carbon steel for machine structure  Type  Slit 
    Rating:
    33%
    (3)
    from S$3.89
    Min. 2 days
  20. Standard set collar For bearing fixing Black dyed
    Iwata Mfg. Standard set collar For bearing fixing Black dyed
    A general-purpose type that can be attached with a set screw. A set collar that holds the shaft with a set screw to fix it. It is the most compact type that can be used for simple positioning. For fixing bearings
    Surface Treatment  Black dyed  Material  Iron (S45C)  Type  Standard 
    Rating:
    100%
    (2)
    from S$3.99
    Min. 2 days
  21. Set Collar 4 Hole Type
    Iwata Mfg. Set Collar 4 Hole Type
    A set collar that holds the shaft with a set screw to fix it. It can be used for simple positioning and is the most compact type in the series. Convenient for attaching brackets and plates and fixing sprockets.
    Rating:
    93%
    (12)
    from S$4.59
    Min. 2 days
  22. Standard slit color SUS304
    Iwata Mfg. Standard slit color SUS304
    It can be fixed without damaging the shaft. Ideal for slide shafts and places where the mounting position is changed frequently.
    Material  SUS304 
    from S$9.89
    Min. 2 days
  23. Separate color Normal SUS304
    Iwata Mfg. Separate color Normal SUS304
    RoHS Directive  10 substances  Applicable Standard  RoHS2  Material  SUS304 
    from S$19.99
    Min. 2 days
  24. Standard slit collar with 2 holes Black dyed
    Iwata Mfg. Standard slit collar with 2 holes Black dyed
    Slit type with strong fastening force. Since it is tightened on the surface, the thrust force is strong and the shaft is not easily scratched. Convenient for attaching brackets and plates and fixing sprockets.
    Surface Treatment  Black dyed  Material  Iron (S45C)  Shape  With 2 holes 
    Rating:
    95%
    (4)
    from S$9.79
    Min. 2 days
  25. SUS304 for standard set collar bearing fixing
    Iwata Mfg. SUS304 for standard set collar bearing fixing
    A general-purpose type that can be attached with a set screw. A set collar that holds the shaft with a set screw to fix it. It is the most compact type that can be used for simple positioning. For fixing bearings
    Material  Stainless steel (SUS304)  Type  Standard 
    from S$6.49
    Min. 2 days
  26. Separate color stainless steel SCSS-sus
    KONISHI MFG (MIYOSHI) Separate color stainless steel SCSS-sus
    RoHS Directive  10 substances  Type  separate 
    Rating:
    100%
    (1)
    from S$29.99
    Min. 2 days
  27. Standard set color resin (POM)
    Iwata Mfg. Standard set color resin (POM)
    Chamfer Diameter D1 (Φmm)  -  Material / Processing  Resin (POM)  Type  Standard 
    Rating:
    100%
    (1)
    from S$2.49
    Min. 2 days
  28. Slit collar D cut screw type
    Iwata Mfg. Slit collar D cut screw type
    Since it is tightened on the surface, it has a strong thrust force and the shaft is not easily scratched. The most varied type in the series. Various parts such as brackets can be attached using the D-cut surface.
    from S$13.99
    Min. 2 days
  29. Shaft collar split type
    KANA (KATAYAMA CHAIN) Shaft collar split type
    Optimal for positioning and fixing sprockets, timing pulleys, etc. It can be securely attached with the clamping effect.
    Included Accessories  2 bolts  Surface Treatment  Black dyed  Material  SS400  Type  Split 
    Rating:
    100%
    (5)
    from S$4.59
    Min. 2 days
  30. End plate (1 hole type)
    Iwata Mfg. End plate (1 hole type)
    By attaching it to the end of the shaft, it can be used to fix the inner ring of the bearing and the gear, and to prevent it from coming off. Motor Jikuke k
    RoHS Directive  10 substances  Applicable Standard  RoHS2 
    from S$2.59
    Min. 2 days
  31. Slit color Normal Black dyed
    Iwata Mfg. Slit color Normal Black dyed
    RoHS Directive  10 substances  Applicable Standard  RoHS2  Material  S45C / Black dyed 
    from S$7.19
    Min. 4 days
  32. Set color SC
    KONISHI MFG (MIYOSHI) Set color SC
    RoHS Directive  10 substances  Type  Standard 
    from S$1.99
    Min. 4 days
  33. Separate color type for steel pipe
    Iwata Mfg. Separate color type for steel pipe
    A set collar with a separate structure that is convenient when assembling and maintaining machines. A type with strong thrust and less scratches on the shaft. A separate color that matches the inner diameter size to the steel pipe standard.
    Type  separate 
    Rating:
    100%
    (1)
    from S$19.99
    Min. 2 days
  34. Standard slit collar For bearing fixing Black dyed
    Iwata Mfg. Standard slit collar For bearing fixing Black dyed
    Slit type with strong fastening force. Since it is tightened on the surface, the thrust force is strong and the shaft is not easily scratched. Hold and fix the inner ring of the bearing. For fixing bearings
    Surface Treatment  Black dyed  Material  Iron (S45C)  Type  Slit 
    Rating:
    100%
    (1)
    from S$10.99
    Min. 4 days
  35. Slit collar with keyway
    Iwata Mfg. Slit collar with keyway
    Since it is tightened on the surface, it has a strong thrust force and the shaft is not easily scratched. The most varied type in the series. It can be used for fixing sprockets and pulleys with keys.
    Rating:
    100%
    (1)
    from S$15.99
    Min. 4 days
  36. Set collar Bearing fixing type (long)
    Iwata Mfg. Set collar Bearing fixing type (long)
    A set collar that holds the shaft with a set screw to fix it. It can be used for simple positioning and is the most compact type in the series. Hold and fix the inner ring of the bearing. A long type with a long boss.
    Type  Standard 
    Rating:
    100%
    (1)
    from S$5.59
    Min. 4 days
  37. Standard Slit Collar 3 Holes Black Dyed
    Iwata Mfg. Standard Slit Collar 3 Holes Black Dyed
    Slit type with strong fastening force. Since it is tightened on the surface, the thrust force is strong and the shaft is not easily scratched. Convenient for attaching brackets and plates and fixing sprockets.
    Surface Treatment  Black dyed  Material  Iron (S45C)  Shape  With 3 holes 
    Rating:
    100%
    (1)
    from S$9.59
    Min. 4 days
  38. Set color Keyway / 4-hole type
    Iwata Mfg. Set color Keyway / 4-hole type
    A set collar that holds the shaft with a set screw to fix it. It can be used for simple positioning and is the most compact type in the series. It can be used for fixing sprockets and pulleys with keys. * It is designed to be larger than the JIS standard to prevent interference with the keys.
    Material / Processing  Iron (S45C) / Black dyed  Type  Standard 
    from S$7.49
    Min. 2 days
  39. Urethane damper normal type
    Iwata Mfg. Urethane damper normal type
    Hardness  Shore A90 (damper) 
    Rating:
    100%
    (1)
    from S$0.96
    Min. 4 days
  40. Set color Key groove type
    Iwata Mfg. Set color Key groove type
    A set collar that holds the shaft with a set screw to fix it. It can be used for simple positioning and is the most compact type in the series. It can be used for fixing sprockets and pulleys with keys. * It is designed to be larger than the JIS standard to prevent interference with the keys.
    Type  Standard 
    from S$6.89
    Min. 4 days
View : Grid List
Filter

Items 1 - 40 of 264

Page
Set Ascending Direction