Round Anti Vibration Rubber

By attenuating and absorbing vibrations from operating machines, noise and adverse effects on adjacent machines are prevented, and the life of machinery and equipment is extended.

It has a simple structure and is easy to install. It is small and has a relatively large spring constant, so it can support a large load. Depending on the mounting method, it can be used not only in the compression direction and shear direction but also in the tilt direction, and has wide applica... Read More

The spring constants in the three directions are almost equal. Since the rubber part is covered with metal, it is not affected by lubrication leaks or direct sunlight. It can be used almost without exception as anti-vibration rubber for general industrial machinery. Various machine tools, various... Read More

It can be easily installed without taking up space. For anti-vibration measures for pumps, motors, blowers, etc. * Select the quantity and mounting position so that the load is even.

It has a simple structure and is easy to install. It is small and has a relatively large spring constant, so it can support a large load. Depending on the mounting method, it can be used not only in the compression direction and shear direction but also in the tilt direction, and has wide applica... Read More

It has a simple structure and is easy to install. Nuts are embedded on one side, so the mounting bolt space can be reduced. Various support methods are possible Depending on the mounting method, it can be used in the compression direction, the shear direction, as well as the tilt direction, and h... Read More

* Nuts are not included.

Simple and inexpensive: Simple structure and easy to install. Small mounting space is required: A small size and a relatively large spring constant can be obtained, so a large load can be supported. Various support methods are possible: Depending on the mounting direction, it can be used not only... Read More

By attenuating and absorbing vibrations from operating machines, noise and adverse effects on adjacent machines are prevented, and the life of machinery and equipment is extended. * Avoid using the product when exposed to sunlight, humidity, acid, or chemicals. * Arrange so that the load (deflect... Read More

Due to its high spring constant, it can be used for small and large loads. It has a wide range of applicability such as slanted placement. Pumps, various machine tools, centrifuges, crushers, motors, and other general industrial machines.

standard series. Simple shape and easy to install. And economical. Capable of supporting relatively heavy equipment. The shear spring constant is lower than the compression spring constant, allowing for inclined support. The rubber material uses rubber that conforms to JIS K 6386 (rubber material... Read More

Due to its simple structure, it is easy to handle and its relatively high spring constant, it is compact and can be used for large weights. The ease of installation is that it can be used purely as a shear type depending on the installation direction, and it has a wide range of applications such ... Read More

Simple and inexpensive: Simple structure and easy to install. Small mounting space is required: A small size and a relatively large spring constant can be obtained, so a large load can be supported. Various support methods are possible: Depending on the mounting direction, it can be used not only... Read More

It has a simple structure and is highly effective in preventing vibration, impact, and noise when attached to various machines and equipment, and can be used in a wide range of applications. Uses SUS metal fittings for excellent rust prevention. Suitable for use in high humidity environments. Pum... Read More

Good vibration and soundproofing effect. Since the spring constant is smaller than that of round anti-vibration rubber of the same shape, better anti-vibration and sound-proofing effects can be obtained. Good installation stability. The contact surface with the floor has a unique pattern and has ... Read More

Compared to No. 4000, this series has a higher rubber height and a softer spring. Simple shape and easy to install. And economical. Capable of supporting relatively heavy equipment. The shear spring constant is lower than the compression spring constant, allowing for inclined support. The rubber ... Read More

It is a product with a simple structure and a high anti-vibration effect. With a wide variety of product items, we can handle everything from light loads to vibration isolation for large equipment. Since it uses weather resistant rubber, it can be used outdoors. Floor-standing type anti-vibration... Read More

Rubber hardness is much lower than that of conventional anti-vibration rubber. By setting the rubber hardness to 15°, it provides optimal vibration isolation for light-load equipment with supporting loads of 6.5N{0.7kgf} to 29N{3kgf}. Simple structure and easy installation. Metal fittings are ser... Read More

Standard series. Easy to shape and install. Moreover, it is economical. Can support relatively heavy equipment. The shear spring constant is lower than the compression spring constant, allowing tilt support, etc. The rubber material used is rubber that conforms to JIS K 6386 (rubber material for ... Read More

Because it is designed with a low natural frequency, vibration isolation in the low frequency range is possible. A type in which bolts are integrally molded on the top and bottom surfaces. Vibration isolation for 1.6 to 100kg equipment with 4-point support. Anti-vibration for pumps, compressors, ... Read More

Using foamed polyurethane material, it can reduce low frequency vibration. Ether-based polyurethane that is resistant to water and ultraviolet rays and has almost no deterioration like rubber. Durability has been improved by using stainless steel bowl-shaped metal fittings. * The natural frequenc... Read More

A spring that is soft in the a direction. A spring that is hard in the r direction. A relatively large twist angle can be obtained. Since the twist angle of the outer cylinder with respect to the inner cylinder can be obtained relatively large, it is suitable as a joint fulcrum of a link mechanis... Read More

Ideal for anti-vibration measures for lightweight machines: The spring constant is smaller than other anti-vibration rubbers, making it suitable for anti-vibration of lightweight equipment. Moreover, it is effective against continuous vibration and sudden impact. Excellent horizontal stability: E... Read More

The rubber surface, which comes into direct contact with the floor, has a unique pattern and is devised to further enhance the ground contact effect and vibration isolation effect. Easy to install. It can be used when it is not necessary to fix it to the floor with anchor bolts or where anchor bo... Read More

Ideal for vibration isolation of lightweight machines: The spring constant is small, and vibration isolation measures for lightweight machines, which was difficult in the past, can also be performed. Achieves low natural frequency: Since the natural frequency can be set low, vibration isolation f... Read More

Since it is designed with a low natural frequency, vibration isolation in the low frequency range is possible. A composite type of spring and gel. Anti-vibration for equipment weighing 3.2 to 16 kg with 4-point support. Anti-vibration for pumps, compressors, precision equipment, and measuring equ... Read More

A series with high rust prevention black coating to improve rust prevention. Easy to shape and install. Moreover, it is economical. Can support relatively heavy equipment. The shear spring constant is lower than the compression spring constant, allowing tilt support, etc. The rubber material used... Read More

Excellent anti-vibration performance: A soft spring can be obtained due to the cylindrical composite spring structure that combines rubber and coil springs, and a large amount of deflection can be obtained. Large load capacity: Due to the composite spring of metal spring and special synthetic rub... Read More

The rubber surface, which comes into direct contact with the floor, has a unique pattern that further enhances ground contact efficiency and anti-vibration effect. Due to its relatively high spring constant, it is small and suitable for heavy loads. Due to the unique pattern on the rubber surface... Read More

Since it is designed with a low natural frequency, vibration isolation in the low frequency range is possible. A type in which a plate is integrally molded on the bottom and bolts are integrally molded on the top. Anti-vibration for equipment weighing 5 to 50 kg with 4-point support. Anti-vibrati... Read More

No machine foundation required, easy to install. Suppresses machine movement. Machine level adjustment is easy. Effective for machines with large horizontal vibrations. Machine tools, horizontal injection molding machines, etc.

No machine foundation required, easy to install. Easy level adjustment. Effective for up/down and left/right shaking. Various press machines, machine tools, vertical injection molding machines, etc.

Due to its high spring constant, it can be used for small size and large loads. It has a wide range of applicability such as slanted placement. Pumps, various machine tools, centrifuges, crushers, motors, and other general industrial machines.

A series with high antirust black coating for improved rust prevention. Simple shape and easy to install. And economical. Capable of supporting relatively heavy equipment. The shear spring constant is lower than the compression spring constant, allowing for inclined support. The rubber material u... Read More