All Category

Flag Hinges

View : Grid List
Filter

Items 1 - 40 of 61

Set Ascending Direction
  1. Thick double-sided flag hinge for super heavy (L = 154)
    TAKIGEN MFG Thick double-sided flag hinge for super heavy (L = 154)
    Left and right combined type Super large heavy door / gate
    TAKIGEN code  10082  Allowable Load (kg)  120 (when using 2 vertical)  Dimension L (mm)  154  Surface finish  Zinc plating chromate treatment (MFZn-C) 
    Rating:
    93%
    from S$38.99
    Min. 2 days
  2. Stainless Flag Hinge
    TAKIGEN MFG Stainless Flag Hinge
    Made of stainless steel and titanium, it has excellent corrosion resistance. Entrance / distribution board
    Material  Stainless steel sheet (SUS304)  Surface finish  Hairline finish 
    Rating:
    90%
    from S$5.49
    Min. 2 days
  3. Stainless Pull-out flag hinge (L100 × W60 perforated)
    TAKIGEN MFG Stainless Pull-out flag hinge (L100 × W60 perforated)
    Made of stainless steel and has excellent corrosion resistance. Ships, vehicles, kitchen equipment, outdoor equipment
    Surface finish  Mirror buffing  Material  Stainless steel sheet (SUS304) 
    Rating:
    100%
    from S$11.99
    Min. 2 days
  4. Stainless flag hinge
    Geo. Prince Takeshita Stainless flag hinge
    Made of stainless steel, it has excellent corrosion resistance and heat resistance. The core rod is also made of stainless steel. It is a general-purpose flag hinge. * Left and right are available. Please be careful when ordering. * # 3 and # 4 size core rods are iron cores
    Material  Stainless steel plate (SUS-304)  Type  Architecture 
    Rating:
    100%
    from S$11.99
    Min. 2 days
  5. Stainless steel double union flag hinge (L1 = 103)
    TAKIGEN MFG Stainless steel double union flag hinge (L1 = 103)
    Made of stainless steel and has excellent corrosion resistance. Ships, vehicles, kitchen equipment, outdoor equipment
    Surface finish  Hairline finish  Material  Stainless steel sheet (SUS304)  Dimension L2 (mm)  50  Dimension D1 (Φmm)  11  Dimension L1 (mm)  103  Dimension D2 (Φmm)  20  Dimension W (mm)  116  Dimension L4 (mm)  Dimension L3 (mm)  Mass (g)  405  Dimension t (mm) 
    from S$27.99
    Min. 2 days
  6. Heavy Duty Thick Flag Hinge (L = 114)
    TAKIGEN MFG Heavy Duty Thick Flag Hinge (L = 114)
    Left and right combined type Super large heavy door / gate
    TAKIGEN code  10083  Dimension L (mm)  114  Mass (g)  1320  Surface finish  Zinc plating chromate treatment (MFZn-C) 
    from S$38.99
    Min. 2 days
  7. Iron small flag hinge
    Geo. Prince Takeshita Iron small flag hinge
    A flag hinge that can be used for both left and right. Various devices
    Type  Equipment and machinery  Recommended E-ring  Φ4  Mass (g)  79  Material  Hot rolled steel plate (SPHC) 
    Rating:
    100%
    from S$2.19
    Min. 2 days
  8. Double-sided flag hinge for weight (L1 = 103)
    TAKIGEN MFG Double-sided flag hinge for weight (L1 = 103)
    Left and right combined type Distribution board, control panel, cubicle, machine tool, entrance door
    TAKIGEN code  10015  Mass (g)  425  Dimension L1 (mm)  103  Dimension L2 (mm)  50  Surface finish  Zinc plating chromate treatment (MFZn-C)  Dimension D1 (Φmm)  11  Dimension W (mm)  116  Dimension t (mm)  4.5  Material  Hot rolled steel plate (SPHC)  Dimension D2 (Φmm)  21  Dimension L4 (mm) 
    from S$7.79
    Min. 2 days
  9. Lift-Off Flag Style Hinge
    TOCHIGIYA Lift-Off Flag Style Hinge
    The door can be removed by inserting and removing the hinge. Distribution board, distribution board, various housings, etc.
    RoHS Directive  10 substances  Material / Processing  SUS304 / Gloss barrel polishing 
    Rating:
    100%
    from S$15.99
    Min. 2 days
  10. Stainless steel insertion / extraction flag hinge
    TRUSCO Stainless steel insertion / extraction flag hinge
    It is stainless steel and has excellent corrosion resistance. It is a hinge for inserting and removing the flag. Indoor equipment, environmental equipment, marine equipment, etc.
    Mass (g)  170  Length (mm)  50 
    from S$29.99
    Min. 2 days
  11. Double-sided flag hinge for weight (L1 = 123)
    TAKIGEN MFG Double-sided flag hinge for weight (L1 = 123)
    Left and right combined type Distribution board, control panel, cubicle, machine tool, entrance door
    Dimension L2 (mm)  74  TAKIGEN code  10014  Dimension L1 (mm)  123  Dimension L4 (mm)  Dimension D2 (Φmm)  21  Surface finish  Zinc plating chromate treatment (MFZn-C)  Mass (g)  510  Dimension W (mm)  116  Material  Hot rolled steel plate (SPHC)  Dimension t (mm)  4.5  Dimension L3 (mm)  Dimension D1 (Φmm)  11 
    from S$9.29
    Min. 2 days
  12. Draw flag hinge
    TOCHIGIYA Draw flag hinge
    RoHS Directive  10 substances  Parts Name  Hinge piece (A), hinge piece (B), shaft 
    Rating:
    100%
    from S$5.99
    Min. 2 days
  13. Double-sided flag hinge for weight (L1 = 151)
    TAKIGEN MFG Double-sided flag hinge for weight (L1 = 151)
    Left and right combined type Distribution board, control panel, cubicle, machine tool, entrance door
    Dimension D2 (Φmm)  21  Dimension W (mm)  116  Dimension L2 (mm)  74  Dimension t (mm)  4.5  Dimension L1 (mm)  151  Dimension L4 (mm)  Surface finish  Zinc plating chromate treatment (MFZn-C)  TAKIGEN code  10013  Material  Hot rolled steel plate (SPHC)  Mass (g)  630  Dimension D1 (Φmm)  11 
    from S$9.69
    Min. 2 days
  14. Draw flag hinge
    TOCHIGIYA Draw flag hinge
    RoHS Directive  10 substances 
    Rating:
    100%
    from S$10.99
    Min. 5 days
  15. Double-sided flag hinges for weight
    TAKIGEN MFG Double-sided flag hinges for weight
    Left and right combined type Distribution board, control panel, cubicle, machine tool, entrance door
    Dimension L2 (mm)  38  Dimension D1 (Φmm)  Material  Hot rolled steel plate (SPHC)  TAKIGEN code  10016  Dimension L1 (mm)  78  Dimension W (mm)  88  Dimension D2 (Φmm)  16  Dimension L4 (mm)  Dimension t (mm)  3.2  Surface finish  Zinc plating chromate treatment (MFZn-C)  Mass (g)  190 
    from S$4.39
    Min. 2 days
  16. Stainless steel double union flag hinge (L1 = 151)
    TAKIGEN MFG Stainless steel double union flag hinge (L1 = 151)
    Made of stainless steel and has excellent corrosion resistance. Ships, vehicles, kitchen equipment, outdoor equipment
    Dimension D1 (Φmm)  11  Mass (g)  580  Dimension t (mm)  Material  Stainless steel sheet (SUS304)  Dimension L4 (mm)  Dimension L1 (mm)  151  Dimension L3 (mm)  Surface finish  Hairline finish  Dimension D2 (Φmm)  20  Dimension L2 (mm)  74  Dimension W (mm)  116 
    from S$34.99
    Min. 2 days
  17. Iron special thickness welded hinge fabric (for right) 4 pieces
    TRUSCO Iron special thickness welded hinge fabric (for right) 4 pieces
    Dimension D1 (Φmm)  12.0  Dimension B (mm)  54  Specification  For right  Material  Iron (SPCH)  Surface Treatment  Phosphate 
    from S$43.99
    Min. 2 days
  18. Heavy duty double-sided flag hinge (L = 200)
    TAKIGEN MFG Heavy duty double-sided flag hinge (L = 200)
    Made of stainless steel and has excellent corrosion resistance. The shaft can be inserted and removed from both the top and bottom. Left and right combined type Tide-proof large doors, port facilities, large ships, oil refineries, nuclear power plants
    TAKIGEN code  11927  Dimension L (mm)  200  Mass (g)  2500  Surface finish  Hairline finish  Material  Stainless steel sheet (SUS304) 
    from S$179.90
    Min. 2 days
  19. Double-sided flag hinge for weight (L1 = 204)
    TAKIGEN MFG Double-sided flag hinge for weight (L1 = 204)
    Left and right combined type Distribution board, control panel, cubicle, machine tool, entrance door
    TAKIGEN code  10012  Mass (g)  1625  Dimension L4 (mm)  Dimension W (mm)  160  Dimension D2 (Φmm)  29  Dimension D1 (Φmm)  16  Dimension L2 (mm)  100  Dimension L1 (mm)  204  Surface finish  Zinc plating chromate treatment (MFZn-C)  Material  Hot rolled steel plate (SPHC)  Dimension t (mm) 
    from S$39.99
    Min. 2 days
  20. Stainless steel double union flag hinge (L1 = 123)
    TAKIGEN MFG Stainless steel double union flag hinge (L1 = 123)
    Made of stainless steel and has excellent corrosion resistance. Ships, vehicles, kitchen equipment, outdoor equipment
    Dimension L1 (mm)  123  Mass (g)  480  Dimension D2 (Φmm)  20  Material  Stainless steel sheet (SUS304)  Dimension D1 (Φmm)  11  Surface finish  Hairline finish  Dimension W (mm)  116  Dimension L4 (mm)  Dimension t (mm)  Dimension L3 (mm)  Dimension L2 (mm)  60 
    Rating:
    100%
    from S$29.99
    Min. 2 days
  21. Stainless Heavy Duty Flag Hinge (L1 = 78)
    TAKIGEN MFG Stainless Heavy Duty Flag Hinge (L1 = 78)
    Made of stainless steel and has excellent corrosion resistance. Ships, vehicles, kitchen equipment, outdoor equipment
    Material  Stainless steel sheet (SUS304)  Dimension L1 (mm)  78  Surface finish  Hairline finish  Dimension D2 (Φmm)  16  Mass (g)  185  Dimension L4 (mm)  Dimension t (mm)  Dimension L3 (mm)  Dimension L2 (mm)  38  Dimension W (mm)  88  Dimension D1 (Φmm) 
    from S$13.99
    Min. 5 days
  22. Stainless steel insertion flag hinge (L100 × W54 without hole)
    TAKIGEN MFG Stainless steel insertion flag hinge (L100 × W54 without hole)
    Made of stainless steel and has excellent corrosion resistance. Ships, vehicles, kitchen equipment, outdoor equipment
    Surface finish  Hairline finish  Material  Stainless steel sheet (SUS304) 
    from S$9.99
    Min. 2 days
  23. Draw flag hinge
    TOCHIGIYA Draw flag hinge
    RoHS Directive  10 substances  Mass (g)  137 
    from S$16.99
    Min. 5 days
  24. Stainless steel double-sided flag hinge (L1 = 204)
    TAKIGEN MFG Stainless steel double-sided flag hinge (L1 = 204)
    Made of stainless steel and has excellent corrosion resistance. Ships, vehicles, kitchen equipment, outdoor equipment
    Dimension W (mm)  160  Dimension D2 (Φmm)  29  Dimension L1 (mm)  204  Surface finish  Hairline finish  TAKIGEN code  10556  Material  Stainless steel sheet (SUS304)  Dimension t (mm)  Dimension D1 (Φmm)  16  Mass (g)  1625  Dimension L2 (mm)  100  Dimension L4 (mm) 
    from S$129.90
    Min. 4 days
  25. Double-sided flag hinge for weight (L1 = 52)
    TAKIGEN MFG Double-sided flag hinge for weight (L1 = 52)
    Left and right combined type Distribution board, control panel, cubicle, machine tool, entrance door
    Surface finish  Zinc plating chromate treatment (MFZn-C)  Dimension D2 (Φmm)  16  Dimension W (mm)  70  Dimension L1 (mm)  52  TAKIGEN code  10018  Dimension t (mm)  3.2  Material  Hot rolled steel plate (SPHC)  Dimension L4 (mm)  Mass (g)  115  Dimension L2 (mm)  25  Dimension D1 (Φmm) 
    from S$3.29
    Min. 2 days
  26. Stainless steel extra-thick welded hinge for left
    TRUSCO Stainless steel extra-thick welded hinge for left
    Dimension D2 (Φmm)  18.0  Material / Finish  Stainless steel (SUS304)  Dimension C (mm)  3t  Specification  Hairline finish 
    from S$49.99
    Min. 2 days
  27. Double-sided flag hinge for weight (L1 = 66)
    TAKIGEN MFG Double-sided flag hinge for weight (L1 = 66)
    Left and right combined type Distribution board, control panel, cubicle, machine tool, entrance door
    Mass (g)  160  TAKIGEN code  10017  Dimension W (mm)  88  Dimension L4 (mm)  Dimension L2 (mm)  32  Dimension D2 (Φmm)  16  Material  Hot rolled steel plate (SPHC)  Dimension L1 (mm)  66  Dimension t (mm)  3.2  Surface finish  Zinc plating chromate treatment (MFZn-C)  Dimension D1 (Φmm) 
    from S$3.79
    Min. 5 days
  28. Stainless steel small flag hinge
    Geo. Prince Takeshita Stainless steel small flag hinge
    A flag hinge that can be used for both left and right. Made of stainless steel, it has excellent corrosion resistance and heat resistance. Various devices
    Type  Equipment and machinery  Mass (g)  77  Material  Stainless steel plate (SUS-304)  Recommended E-ring  Φ4 
    from S$5.69
    Min. 8 days
  29. Stainless steel special thickness welding hinge for left
    TRUSCO Stainless steel special thickness welding hinge for left
    Dimension A1 (mm)  62.0  Dimension B (mm)  56  Dimension C (mm)  3t  Specification  Hairline finish  Dimension D2 (Φmm)  18.0  Dimension A (mm)  127  Material / Finish  Stainless steel (SUS304)  Trusco Part No.  233-6286  Mass (g)  397 
    from S$32.99
    Min. 2 days
  30. Stainless steel special thickness welding hinge for right
    TRUSCO Stainless steel special thickness welding hinge for right
    Dimension A1 (mm)  62.0  Dimension D2 (Φmm)  18.0  Material / Finish  Stainless steel (SUS304)  Trusco Part No.  512-7955  Dimension A (mm)  127  Dimension C (mm)  3t  Specification  Hairline finish  Mass (g)  397  Dimension B (mm)  56 
    from S$32.99
    Min. 2 days
  31. Assembled flag hinge (single wing L1 = 75)
    TAKIGEN MFG Assembled flag hinge (single wing L1 = 75)
    Can be folded and used. Distribution board / control board / machine tool
    TAKIGEN code  10155  Dimension D (Φmm)  15.9  Dimension L2 (mm)  152  Dimension L3 (mm)  162  Dimension t (mm)  3.2  Mass (g)  535  Dimension L1 (mm)  75  Material  Steel Plate Cold Commercial (SPCC)  Surface finish  Zinc plating chromate treatment (MFZn-C) 
    from S$13.99
    Min. 5 days
  32. 2 pieces for stainless steel special thickness welding hinge right
    TRUSCO 2 pieces for stainless steel special thickness welding hinge right
    Dimension C (mm)  3t  Material / Finish  Stainless steel (SUS304)  Dimension D2 (Φmm)  18.0  Specification  Hairline finish 
    Rating:
    100%
    from S$49.99
    Min. 2 days
  33. Stainless steel insertion / extraction clean room hinge
    TAKIGEN MFG Stainless steel insertion / extraction clean room hinge
    Thrust bearings are used for the shaft to suppress the generation of metal powder due to wear. Since fluororesin is used for the sliding parts, it is effective for wear resistance, heat resistance, and outgassing measures. Since the surface treatment is mirror buffing, it suppresses the adhesion ... Read More
    Surface finish  Blade / mirror buffing  TAKIGEN code  13213 
    from S$85.99
    Min. 5 days
  34. Super heavy weight double-sided flag hinge (L=154)
    TAKIGEN MFG Super heavy weight double-sided flag hinge (L=154)
    TAKIGEN code  11928  Dimension L (mm)  154  Mass (g)  1800  Surface finish  Hairline finish  Material  Stainless steel sheet (SUS304) 
    from S$119.90
    Min. 5 days
  35. Assembled flag hinge
    TAKIGEN MFG Assembled flag hinge
    Can be folded and used. Distribution board / control board / machine tool
    TAKIGEN code  10156  Dimension L2 (mm)  102  Dimension L3 (mm)  112  Dimension D (Φmm)  15.9  Dimension t (mm)  3.2  Mass (g)  360  Dimension L1 (mm)  50  Material  Steel Plate Cold Commercial (SPCC)  Surface finish  Zinc plating chromate treatment (MFZn-C) 
    from S$8.89
    Min. 5 days
  36. Stainless Heavy Duty Flag Hinge (L1 = 52)
    TAKIGEN MFG Stainless Heavy Duty Flag Hinge (L1 = 52)
    Made of stainless steel and has excellent corrosion resistance. Ships, vehicles, kitchen equipment, outdoor equipment
    Material  Stainless steel sheet (SUS304)  Dimension W (mm)  70  Dimension L2 (mm)  25  Dimension L3 (mm)  Dimension t (mm)  Dimension L1 (mm)  52  Mass (g)  110  Dimension D1 (Φmm)  Surface finish  Hairline finish  Dimension L4 (mm)  Dimension D2 (Φmm)  16 
    from S$11.99
    Min. 5 days
  37. Aluminum grouper hinge (A6063 / white anodized)
    No Brand Aluminum grouper hinge (A6063 / white anodized)
    Since a resin bush (POM) is used for the shaft part, there is no generation of metal powder due to wear. Since it is anodized, it has excellent corrosion resistance. Uses a stainless steel shaft.
    Dimensions length (mm)  78  Material  A6063  Mass (g)  36  Next to dimensions (mm)  50  Dimensions (height) (mm)  11 
    from S$7.79
    Min. 7 days
  38. Assembled flag hinge (single wing L1 = 35)
    TAKIGEN MFG Assembled flag hinge (single wing L1 = 35)
    Can be folded and used. Distribution board / control board / machine tool
    TAKIGEN code  10157  Dimension D (Φmm)  15.9  Mass (g)  255  Dimension t (mm)  3.2  Dimension L1 (mm)  35  Dimension L2 (mm)  72  Dimension L3 (mm)  82  Material  Steel Plate Cold Commercial (SPCC)  Surface finish  Zinc plating chromate treatment (MFZn-C) 
    from S$7.99
    Min. 5 days
  39. Stainless steel double-sided flag hinge (L1 = 66)
    TAKIGEN MFG Stainless steel double-sided flag hinge (L1 = 66)
    Made of stainless steel and has excellent corrosion resistance. Ships, vehicles, kitchen equipment, outdoor equipment
    Dimension L4 (mm)  Mass (g)  155  Dimension t (mm)  Surface finish  Hairline finish  Dimension L1 (mm)  66  TAKIGEN code  10561  Material  Stainless steel sheet (SUS304)  Dimension W (mm)  88  Dimension L3 (mm)  Dimension L2 (mm)  32  Dimension D1 (Φmm)  Dimension D2 (Φmm)  16 
    from S$12.99
    Min. 5 days
  40. Stainless steel extra-thick welded hinge for left
    TRUSCO Stainless steel extra-thick welded hinge for left
    Mass (g)  454  Dimension A (mm)  153  Material / Finish  Stainless steel (SUS304)  Dimension D2 (Φmm)  18.0  Dimension B (mm)  56  Dimension C (mm)  3t  Specification  Hairline finish  Trusco Part No.  233-6294  Dimension A1 (mm)  72.5 
    from S$39.99
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 61

Set Ascending Direction