Dampers

It is a direct acting type air damper. It can be used for sliding doors with a self-closing function, and the air pressure can be adjusted by turning the screw at the end. Easy to install due to its compact design. Achieved weight reduction by using resin for the internal rod. Air pressure can be... Read More

The reaction force is applied in the direction in which the rod contracts, not in the direction in which it expands. By adopting a special adjustment mechanism, the damper force can be finely adjusted with the needle valve. It is lightweight because it uses mainly resin. Compact design for easy i... Read More

Resin is used as the main material to achieve small size and low cost. Home appliances / housing equipment / OA equipment * Please use in combination with an external stopper. * Please ensure sufficient mounting strength of the product. (As a guide, about 2 to 3 times the maximum efficacy value) ... Read More

Appropriate shock absorption characteristics can be obtained. Made of resin, it is small and lightweight.

A damper unit that creates a soft-close mechanism by retrofitting it to a drawer. It is easy to use with a combination of a damper unit and a strike, and adds value such as improving the operability and luxury of the drawer.

Softly close the lid and cover of the BOX. AV equipment, communication equipment, measuring equipment, various storage cases * The operating angle of the damper is 110 °. Be sure to provide an external stopper as rotating it any further may damage the damper.

It is a direct acting type air damper. It can be used for sliding doors with a self-closing function, and the air pressure can be adjusted by turning the screw at the end.

A magnet that catches the tip of the rod. Used for pulling out the piston rod.

A shock absorbing part that utilizes the viscosity of oil. It is possible to open and close and reciprocate the lid and door smoothly and quietly (2WAY specification). Automobile interior parts, audio equipment, home appliances, OA equipment, office equipment, etc.

A damper unit that creates a soft-close mechanism by retrofitting it to a drawer. It is easy to use with a combination of a damper unit and a strike, and adds value such as improving the operability and luxury of the drawer. For system kitchen drawers. It can be used on one side and has a recomme... Read More

A shock absorbing part that utilizes the viscosity of oil. It is possible to open and close and reciprocate the lid and door smoothly and quietly (2WAY specification). Automobile interior parts, audio equipment, home appliances, OA equipment, office equipment, etc.

There are types of damper torque that are generated clockwise and counterclockwise (a one-way clutch is built into the damper shaft). Softly close the lid and cover of the BOX. AV equipment, communication equipment, measuring equipment, various storage cases * Since the damper does not have a bea... Read More

A damper unit that creates a soft-close mechanism by retrofitting it to a drawer. It is easy to use with a combination of a damper unit and a strike, and adds value such as improving the operability and luxury of the drawer. For steel drawers. A wooden drawer is also available separately. Since i... Read More

A strike for damper units that creates a soft-close mechanism by retrofitting the drawer. It is easy to use with a combination of a damper unit and a strike, and adds value such as improving the operability and luxury of the drawer. This item is a single steel drawer strike. Please use with TK so... Read More

A damper unit that creates a soft-close mechanism by retrofitting it to a drawer. It is easy to use with a combination of a damper unit and a strike, and adds value such as improving the operability and luxury of the drawer. For steel drawers. One-sided use supports recommended cabinet width ~ 60... Read More

Damper torque is generated both clockwise and counterclockwise. Softly opens and closes the lid and cover of the BOX. AV equipment, communication equipment, measuring equipment, various storage cases * Since the damper does not have a bearing due to its structure, be sure to provide a rotating be... Read More

A damper unit that creates a soft-close mechanism by retrofitting it to a drawer. It is easy to use with a combination of a damper unit and a strike, and adds value such as improving the operability and luxury of the drawer. For wooden drawers. It can be used on one side and has a recommended cab... Read More

Eliminate the slamming of the door! The child slams the door! The door isn't always closed ... In such cases, we highly recommend the Rapcon Door Damper! The stylish design makes it easy to install. Please use it for doors that open and close often, such as living room doors.

Lightweight BOX, cover, etc. can be opened and closed softly. It can be widely used for AV equipment, communication equipment, measuring equipment, various storage cases, etc. In addition, the geared type is suitable when braking is required for linear motion. AV equipment, communication equipmen... Read More

A damper unit that creates a soft-close mechanism by retrofitting it to a drawer. It is easy to use with a combination of a damper unit and a strike, and adds value such as improving the operability and luxury of the drawer. This product is a single damper unit. One-sided use supports recommended... Read More

A damper unit that creates a soft-close mechanism by retrofitting it to a drawer. It is easy to use with a combination of a damper unit and a strike, and adds value such as improving the operability and luxury of the drawer. This product is a single damper unit. Use with a steel drawer strike or ... Read More

A damper unit that creates a soft-close mechanism by retrofitting it to a drawer. It is easy to use with a combination of a damper unit and a strike, and adds value such as improving the operability and luxury of the drawer. For wooden drawers. One-sided use supports recommended cabinet width ~ 6... Read More

Damper guide for TM-316 and TM-318. Installation is screwed for trial production or small lots. For mass production, the damper guide can be integrally molded. Audio equipment, home appliances, OA equipment, office equipment, etc. * The connection cannot be extended for use.

It is an indoor product only. Speed adjustment function: The closing speed can be easily adjusted with the adjustment screw. * The closing speed may change depending on the room temperature.

Mounting bracket for L-626 only. Easy to install soft damper. For office equipment, opening and closing various doors

A strike for damper units that creates a soft-close mechanism by retrofitting the drawer. It is easy to use with a combination of a damper unit and a strike, and adds value such as improving the operability and luxury of the drawer. This item is a single strike for wooden drawers. Please use with... Read More

The strength of the damper is automatically adjusted according to the applied load, and it can handle torque values of 5 to 10 Nm. Appropriate damper characteristics can be obtained in the rotation range of 130 °. Indoor equipment such as inspection / measuring machines / environmental machines

A strike for damper units that creates a soft-close mechanism by retrofitting the drawer. It is easy to use with a combination of a damper unit and a strike, and adds value such as improving the operability and luxury of the drawer. This item is a single steel drawer strike. Please use with TK so... Read More

A damper unit that creates a soft-close mechanism by retrofitting it to a drawer unit or device. The combination of the damper unit and the strike prepared by the customer makes it easy to use, and adds value such as the operability and shock absorption of the drawer unit. This product is a singl... Read More

The compact shape saves installation space. The flap closing speed changes depending on the high torque direction and low torque direction. Since there is no impact sound when the flap closes, it is ideal for installation locations where quietness is important. Damper characteristics can be obtai... Read More

A strike for damper units that creates a soft-close mechanism by retrofitting the drawer. It is easy to use with a combination of a damper unit and a strike, and adds value such as improving the operability and luxury of the drawer. This item is a single strike for wooden drawers. Please use with... Read More

An endless damper with a lineup of maximum torque of 0.8N ・ m. There is a damper effect in only one direction. For damping the sliding door (gravity type) of the device. For soft closing of device covers, etc. * Avoid using with a load that exceeds the set torque. * Applying a radial load or thr... Read More