A moving unit that uses a dovetail groove (DT method) for the moving guide. A rack and pinion is used as the feed method, and a large amount of movement can be obtained. It can be widely used for positioning applications such as cameras and sensors. It can be fixed at any position with a lever-ty... Read More
Type Z stage Sensitivity 0.1mm Clamp Lever type Scale Vernier reading 0.1mm Load capacity (N) 19.6 RoHS directive (corresponding to 10 substances) Correspondence Operation position One handle Direction of movement Z axis 1 direction Feed method Rack-and-pinion Moving guide Ant groove Length of movement (knob 1 rotation)about18mm
We have a lineup of 4 models depending on the distance traveled. An epoch-making lead screw type stage that allows you to select the amount of movement for one rotation of the handle from 2 mm, 5 mm, and 10 mm, respectively, according to the intended use. A visually easy-to-read center-sorting co... Read More
Material (Main Unit) Made of aluminum alloy Type Z stage Minimum Reading (Scale Interval) (mm) 0.1 Surface Treatment (Main Unit) Satin treated anodized Load capacity (N) 14.7 Feed method Lead screw Moving guide Ant groove
Thin and lightweight, there are rack and pinion type and lead screw type, and we will try to differentiate by different size development from the skilled skill stage and deliver the original stage that is most suitable for usability.
As a standard part for positioning applications and as a machin... Read More
Material (Main Unit) Made of aluminum alloy Type Z stage Minimum Reading (Scale Interval) (mm) 0.1 Surface Treatment (Main Unit) Satin treated anodized Feed method Lead screw Moving guide Ant groove
Thin and lightweight, there are rack and pinion type and lead screw type, and we will try to differentiate by different size development from the skilled skill stage and deliver the original stage that is most suitable for usability.
As a standard part for positioning applications and as a machin... Read More
Material (Main Unit) Made of aluminum alloy Type Z stage Minimum Reading (Scale Interval) (mm) 0.1 Surface Treatment (Main Unit) Satin treated anodized Feed method Lead screw Moving guide Ant groove
Thin and lightweight, there are rack and pinion type and lead screw type, and we will try to differentiate by different size development from the skilled skill stage and deliver the original stage that is most suitable for usability.
As a standard part for positioning applications and as a machin... Read More
Material (Main Unit) Made of aluminum alloy Type Z stage Minimum Reading (Scale Interval) (mm) 0.1 Surface Treatment (Main Unit) Satin treated anodized Feed method Rack-and-pinion Moving guide Ant groove
Achieves smooth sliding and high durability. By adopting a reinforced clamp lever, the fixed holding force is also increased, and the position and direction of the lever can be set freely.
This is an epoch-making feed screw type stage that can be selected from 2 mm, 5 mm, and 10 mm for each rotation of the handle according to the application. Employs a center-distributed color scale that is easy to see visually. It has a structure that allows the left and right rearrangement of the... Read More
Thin and lightweight, there are rack and pinion type and lead screw type, and we will try to differentiate by different size development from the skilled skill stage and deliver the original stage that is most suitable for usability.
As a standard part for positioning applications and as a machin... Read More
Material (Main Unit) Made of aluminum alloy Type Z stage Minimum Reading (Scale Interval) (mm) 0.1 Surface Treatment (Main Unit) Satin treated anodized Feed method Lead screw Moving guide Ant groove
A wedge-shaped manual Z stage that uses a precision cross roller guide. The body material uses a white aluminum finish.
* Replacement parts are not included in the overhaul fee.
Specification (Minimum reading) 10μm / scale Material (Main Unit) Aluminum alloy Type Z stage Finish (Appearance) White finish Driving System Handle Load capacity (N) 49 (horizontal) RoHS directive (corresponding to 10 substances) Correspondence Moving guide Cross roller
Thin and lightweight, there are rack and pinion type and lead screw type, and we will try to differentiate by different size development from the skilled skill stage and deliver the original stage that is most suitable for usability.
As a standard part for positioning applications and as a machin... Read More
Material (Main Unit) Made of aluminum alloy Type Z stage Minimum Reading (Scale Interval) (mm) 0.1 Surface Treatment (Main Unit) Satin treated anodized Feed method Rack-and-pinion Moving guide Ant groove
Thin and lightweight, there are rack and pinion type and lead screw type, and we will try to differentiate by different size development from the skilled skill stage and deliver the original stage that is most suitable for usability.
As a standard part for positioning applications and as a machin... Read More
Material (Main Unit) Made of aluminum alloy Type Z stage Minimum Reading (Scale Interval) (mm) 0.1 Surface Treatment (Main Unit) Satin treated anodized Feed method Rack-and-pinion Moving guide Ant groove
Thin and lightweight, there are rack and pinion type and lead screw type, and we will try to differentiate by different size development from the skilled skill stage and deliver the original stage that is most suitable for usability.
As a standard part for positioning applications and as a machin... Read More
Material (Main Unit) Made of aluminum alloy Type Z stage Minimum Reading (Scale Interval) (mm) 0.1 Surface Treatment (Main Unit) Satin treated anodized Feed method Rack-and-pinion Moving guide Ant groove
Thin and lightweight, there are rack and pinion type and lead screw type, and we will try to differentiate by different size development from the skilled skill stage and deliver the original stage that is most suitable for usability.
As a standard part for positioning applications and as a machin... Read More
Material (Main Unit) Made of aluminum alloy Type Z stage Minimum Reading (Scale Interval) (mm) 0.1 Surface Treatment (Main Unit) Satin treated anodized Feed method Lead screw Moving guide Ant groove
An elevating, compact and lightweight Z-axis stage. A V-groove rail and a steel ball (VB method) are used for the movement guide. It can be widely used for precision positioning applications such as sensors and workpieces.
Sensitivity 0.003 Clamp Plate clamp Withstand Load N (kgf) 14.7(1.5) Direction of movement Z axis 1 direction Feed method CMH-6.5F (standard micrometer) Moving guide V groove rail and steel ball
CHUO PRECISION INDUSTRIAL DT Z-axis stage 40 × 90A moving unit that uses a dovetail groove (DT method) for the moving guide. A rack and pinion is used as the feed method, and a large amount of movement can be obtained. It can be widely used for positioning applications such as cameras and sensors. It can be fixed at any position with a lever-ty... Read MoreType Z stage Sensitivity 0.1mm Clamp Lever type Scale Vernier reading 0.1mm Load capacity (N) 19.6 RoHS directive (corresponding to 10 substances) Correspondence Operation position One handle Direction of movement Z axis 1 direction Feed method Rack-and-pinion Moving guide Ant groove Length of movement (knob 1 rotation)about18mm
