A moving unit that uses a dovetail groove (DT method) for the moving guide. A rack and pinion is used as the feed method, and a large amount of movement can be obtained. It can be widely used for positioning applications such as cameras and sensors. It can be fixed at any position with a lever-ty... Read More
Type xy stage Sensitivity 0.1mm Clamp Lever type Scale Vernier reading 0.1mm Load capacity (N) 39.2 RoHS directive (corresponding to 10 substances) Correspondence Operation position One handle Direction of movement XY axis 2 directions Feed method Rack-and-pinion Moving guide Ant groove Stroke (X distance) (mm) ±30 Stroke (Y distance) (mm) ±30 Length of movement (knob 1 rotation)about18mm
Long stroke movement in the Z-axis and X-axis directions is possible. The drive system is a screw feed type (pitch 2 mm) with a large handle. It can be connected to a 50 mm / 2 inch pitch optical surface plate, etc.
It is a moving unit that uses a dovetail groove for the moving guide. A rack and pinion is used as the feed method, and a large amount of movement can be obtained. It can be widely used for positioning applications such as cameras and sensors. The base plate is sold separately.
For positioning ca... Read More
Material / Finish Main material: Aluminum alloy Type XY stage Load capacity (N) Horizontal: 39.2 Feed method Rack and pinion type Moving guide Ant groove
Thin and lightweight, there are rack and pinion type and lead screw type, and we will try to differentiate by different size development from the skilled skill stage and deliver the original stage that is most suitable for usability.
As a standard part for positioning applications and as a machin... Read More
Material (Main Unit) Made of aluminum alloy Type xy stage Minimum Reading (Scale Interval) (mm) 0.1 Surface Treatment (Main Unit) Satin treated anodized Feed method Lead screw Moving guide Ant groove
Thin and lightweight, there are rack and pinion type and lead screw type, and we will try to differentiate by different size development from the skilled skill stage and deliver the original stage that is most suitable for usability.
As a standard part for positioning applications and as a machin... Read More
Material (Main Unit) Made of aluminum alloy Type xy stage Minimum Reading (Scale Interval) (mm) 0.1 Surface Treatment (Main Unit) Satin treated anodized Feed method Rack-and-pinion Moving guide Ant groove
Thin and lightweight, there are rack and pinion type and lead screw type, and we will try to differentiate by different size development from the skilled skill stage and deliver the original stage that is most suitable for usability.
As a standard part for positioning applications and as a machin... Read More
Material (Main Unit) Made of aluminum alloy Type xy stage Minimum Reading (Scale Interval) (mm) 0.1 Surface Treatment (Main Unit) Satin treated anodized Feed method Rack-and-pinion Moving guide Ant groove
It is a stage that uses aluminum alloy as the main material and has both rigidity and light weight. It can be widely used for precision positioning applications such as cameras, sensors, and workpieces.
For precision positioning of cameras, sensors, workpieces, etc.
Type XY stage Parallelism (μm) When exercising: 20
Thin and lightweight, there are rack and pinion type and lead screw type, and we will try to differentiate by different size development from the skilled skill stage and deliver the original stage that is most suitable for usability.
As a standard part for positioning applications and as a machin... Read More
Material (Main Unit) Made of aluminum alloy Type xy stage Minimum Reading (Scale Interval) (mm) 0.1 Surface Treatment (Main Unit) Satin treated anodized Feed method Rack-and-pinion Moving guide Ant groove
Thin and lightweight, there are rack and pinion type and lead screw type, and we will try to differentiate by different size development from the skilled skill stage and deliver the original stage that is most suitable for usability.
As a standard part for positioning applications and as a machin... Read More
Material (Main Unit) Made of aluminum alloy Type xy stage Minimum Reading (Scale Interval) (mm) 0.1 Surface Treatment (Main Unit) Satin treated anodized Load capacity (N) 29.4 Feed method Rack-and-pinion Moving guide Ant groove
Thin and lightweight, there are rack and pinion type and lead screw type, and we will try to differentiate by different size development from the skilled skill stage and deliver the original stage that is most suitable for usability.
As a standard part for positioning applications and as a machin... Read More
Material (Main Unit) Made of aluminum alloy Type xy stage Minimum Reading (Scale Interval) (mm) 0.1 Surface Treatment (Main Unit) Satin treated anodized Feed method Lead screw Moving guide Ant groove
It is a stage that has both flexibility and operability, such as a stage surface with a different shape on the front and back, rearrangement of the scale plate and clamp lever on the front, back, left and right, and bidirectional (XY) sliding on one axis. It is also very convenient for applicatio... Read More
Material (Main Unit) Made of aluminum alloy Type xy stage Minimum Reading (Scale Interval) (mm) 0.1 Surface Treatment (Main Unit) Satin treated anodized Load capacity (N) 39.2 Feed method Lead screw/rack & pinion Moving guide Ant groove Stroke (X distance) (mm) ±12 Stroke (Y distance) (mm) ±12
This is a new product that uses the adsorption of magnets. We have achieved an amazing thinness of 8 mm that has never been seen before. It is a low-priced product with a different structure from the conventional product. It is a product that does not contain 10 RoHS regulated substances.
Material Steel Type xy stage Surface Treatment Black chromium oxide Clamp Plate clamp Moving guide V groove and steel ball
Thin and lightweight, there are rack and pinion type and lead screw type, and we will try to differentiate by different size development from the skilled skill stage and deliver the original stage that is most suitable for usability.
As a standard part for positioning applications and as a machin... Read More
Material (Main Unit) Made of aluminum alloy Type xy stage Minimum Reading (Scale Interval) (mm) 0.1 Surface Treatment (Main Unit) Satin treated anodized Feed method Lead screw Moving guide Ant groove
XY 300mm each movable. A combination of manual slide type + screw type 1 rotation 2 mm fine adjustment for quick adjustment. Ideal for aligning large materials.
Thin and lightweight, there are rack and pinion type and lead screw type, and we will try to differentiate by different size development from the skilled skill stage and deliver the original stage that is most suitable for usability.
As a standard part for positioning applications and as a machin... Read More
Material (Main Unit) Made of aluminum alloy Type xy stage Minimum Reading (Scale Interval) (mm) 0.1 Surface Treatment (Main Unit) Satin treated anodized Feed method Lead screw Moving guide Ant groove
Thin and lightweight, there are rack and pinion type and lead screw type, and we will try to differentiate by different size development from the skilled skill stage and deliver the original stage that is most suitable for usability.
As a standard part for positioning applications and as a machin... Read More
Material (Main Unit) Made of aluminum alloy Type xy stage Minimum Reading (Scale Interval) (mm) 0.1 Surface Treatment (Main Unit) Satin treated anodized Feed method Lead screw Moving guide Ant groove
Thin and lightweight, there are rack and pinion type and lead screw type, and we will try to differentiate by different size development from the skilled skill stage and deliver the original stage that is most suitable for usability.
As a standard part for positioning applications and as a machin... Read More
Material (Main Unit) Made of aluminum alloy Type xy stage Minimum Reading (Scale Interval) (mm) 0.1 Surface Treatment (Main Unit) Satin treated anodized Feed method Rack-and-pinion Moving guide Ant groove
Thin and lightweight, there are rack and pinion type and lead screw type, and we will try to differentiate by different size development from the skilled skill stage and deliver the original stage that is most suitable for usability.
As a standard part for positioning applications and as a machin... Read More
Material (Main Unit) Made of aluminum alloy Type xy stage Minimum Reading (Scale Interval) (mm) 0.1 Surface Treatment (Main Unit) Satin treated anodized Load capacity (N) 17.15 Feed method Lead screw Moving guide Ant groove Stroke (X distance) (mm) ±30 Stroke (Y distance) (mm) ±30
Thin and lightweight, there are rack and pinion type and lead screw type, and we will try to differentiate by different size development from the skilled skill stage and deliver the original stage that is most suitable for usability.
As a standard part for positioning applications and as a machin... Read More
Material (Main Unit) Made of aluminum alloy Type xy stage Minimum Reading (Scale Interval) (mm) 0.1 Surface Treatment (Main Unit) Satin treated anodized Feed method Rack-and-pinion Moving guide Ant groove
A screw feed stage suitable for fine adjustment applications due to the dovetail groove guide and screw feed adjustment method.
* Depending on the parts fixing the feed screw and handle and the type of micrometer head, it may protrude from the top of the stage. * Please note that depending on the... Read More
Specification [Movement accuracy / straightness] 20 Material Brass Surface Treatment Super black chrome Axis XY axis Parallelism (μm) 100 Load capacity (N) 68.7 Moving guide Ant method
It is a 125mm x 125mmm transmissive XY stage. There is a Φ50mm through hole in the center. It is thinner and lighter than the normal XY stage because it has three layers, the lower stage, the middle stage, and the upper stage.
Material Aluminum alloy Type xy stage Surface Treatment Black alumite pear Clamp Plate clamp Location to Install Operation unit: Center Load capacity (N) 78.4(8kgf) Moving guide V groove and cross roller
Kenko stage* Can be used in combination with the Φ100 black and white stage of the stand KS-20.Type xy stage Feed method Lead screw Stroke (X distance) (mm) ±35 Stroke (Y distance) (mm) ±35from S$599.90Min. 2 days
