All Category

XYZ Rotation Stages

View : Grid List
Filter

3 Item(s)

Set Ascending Direction
  1. DT XYZ axis stage 40 × 90
    CHUO PRECISION INDUSTRIAL DT XYZ axis stage 40 × 90
    A moving unit that uses a dovetail groove (DT method) for the moving guide. A rack and pinion is used as the feed method, and a large amount of movement can be obtained. It can be widely used for positioning applications such as cameras and sensors. It can be fixed at any position with a lever-ty... Read More
    Length of movement  (knob 1 rotation)about18mm  Sensitivity  0.1mm  Mass (kg)  1.2  Load capacity (N)  19.6  table length (mm)  40  table width (mm)  90  Moving guide  Ant groove  Clamp  Lever type  Operation position  One handle  Feed method  Rack-and-pinion  Movement accuracy (mm)  Straightness 0.03  Scale  Vernier reading 0.1mm  Direction of movement  XYZ axis 3 directions  Type  xyz stage  Stroke (Z distance) (mm)  ±30  Stroke (Y distance) (mm)  ±30  Stroke (X distance) (mm)  ±30 
    Rating:
    100%
    from S$789.90
    Min. 2 days
  2. High grade aluminum XYZ rotary stage Φ30
    CHUO PRECISION INDUSTRIAL High grade aluminum XYZ rotary stage Φ30
    An XYZ rotary stage that combines a high-grade aluminum XY stage with a lightweight Z-axis and rotary-axis stage. There are standard type and symmetric type, and left-right symmetry can be configured. It can be widely used for precision positioning applications such as cameras, sensors, and workp... Read More
    Operation position  (XY axis) side  Sensitivity  (XYZ axis) 0.003  XY orthogonality (mm)  0.01  Mass (kg)  0.27  Withstand Load N (kgf)  9.8(1.0)  Material / Processing  Aluminum alloy / black alumite  RoHS Directive  Correspondence  Direction of movement  XYZ rotation 4 directions  Stage dimensions (mm)  Φ30 
    Discontinued
  3. O-type mechanical stand (no lens barrel holder)
    CHUO PRECISION INDUSTRIAL O-type mechanical stand (no lens barrel holder)
    A moving unit that uses a dovetail groove (DT method) for the moving guide. A rack and pinion is used as the feed method, and a large amount of movement can be obtained. It can be widely used for positioning applications such as cameras and sensors.
    Material / Processing  (Table) Brass / Chrome, painted  Length of movement  (knob 1 rotation)about18mm  Commodity condition  * Reasonable (unused / unopened)  Clamp  Sensitivity  0.1mm  Mass (kg)  1.3  table width (mm)  25  table length (mm)  25  Load capacity (N)  4.9  Moving guide  Ant groove  Operation position  One handle  Feed method  Rack-and-pinion  Movement accuracy (mm)  Straightness 0.05  Scale  Vernier reading 0.1mm  Direction of movement  XYZ axis 3 directions  Type  xyz stage  Stroke (Z distance) (mm)  ±30 
    Discontinued
View : Grid List
Filter

3 Item(s)

Set Ascending Direction