Manual Stages

A rotating stage that can perform coarse and fine movements. There are standard type and symmetric type, and left-right symmetry can be configured. Verniers are on both the left and right sides, and the position can be read from either side. It can grab the table surface and rotate 360 degrees. F... Read More

* Can be used in combination with the Φ100 black and white stage of the stand KS-20.

A moving unit that uses a dovetail groove (DT method) for the moving guide. A rack and pinion is used as the feed method, and a large amount of movement can be obtained. It can be widely used for positioning applications such as cameras and sensors. It can be fixed at any position with a lever-ty... Read More

A moving unit that uses a dovetail groove (DT method) for the moving guide. A rack and pinion is used as the feed method, and a large amount of movement can be obtained. It can be widely used for positioning applications such as cameras and sensors. It can be fixed at any position with a lever-ty... Read More

A moving unit that uses a dovetail groove (DT method) for the moving guide. A rack and pinion is used as the feed method, and a large amount of movement can be obtained. It can be widely used for positioning applications such as cameras and sensors. It can be fixed at any position with a lever-ty... Read More

It is a stage with 3 roles, which can be moved in 2 directions of inclination and 1 direction of rotation. Since there are clamps in each of the tilt and rotation directions, it can be fixed at any position. It can be widely used for positioning applications such as cameras and sensors.

The normal miniature stage has the drawback of being loose or spring-loaded and squeaky, but the front lock stage is a miniature size with no backlash, achieving extremely smooth and smooth sliding. In addition, it is equipped with a stopper function that can be fixed at the base of the handle as... Read More

A moving unit that uses a dovetail groove (DT method) for the moving guide. A rack and pinion is used as the feed method, and a large amount of movement can be obtained. It can be widely used for positioning applications such as cameras and sensors. It can be fixed at any position with a lever-ty... Read More

It is a stage with 3 roles, which can be moved in 2 directions of inclination and 1 direction of rotation. Since there are clamps in each of the tilt and rotation directions, it can be fixed at any position. It can be widely used for positioning applications such as cameras and sensors.

The tilt stage is a simple type of ± 20 °. It tilts like a seesaw and can be fixed with a clamp lever at any position. As a standard part for positioning applications and as a machine element part such as jig tools

We have a lineup of 4 models depending on the distance traveled. An epoch-making lead screw type stage that allows you to select the amount of movement for one rotation of the handle from 2 mm, 5 mm, and 10 mm, respectively, according to the intended use. A visually easy-to-read center-sorting co... Read More

We have a lineup of 4 models depending on the distance traveled. An epoch-making lead screw type stage that allows you to select the amount of movement for one rotation of the handle from 2 mm, 5 mm, and 10 mm, respectively, according to the intended use. A visually easy-to-read center-sorting co... Read More

By making the main movable part spherical, we have realized an operation not found in conventional products. It is a stage with a maximum of 180 ° refraction and 360 ° rotation, which was born from a unique idea, and can be freely positioned. As a standard part for positioning applications and as... Read More

The all-resin skeleton stage cannot be handled with metal because it is heavy with the conventional metal dovetail stage, and there is a risk of gas generation due to alumite treatment and impurities mixed in the grease, causing sliding defects. A slide unit that is ideal for various uses. As a s... Read More

The long stage is made of aluminum alloy and is a lightweight, slim and long stroke stage. It can be installed from both directions with M2 screws from the front side and M3 screws from the back side. As a standard part for positioning applications and as a machine element part such as jig tools

Uses a screw drive system (pitch 0.5 mm) and dovetail groove type movement guide, and is excellent in adjusting short strokes.

The long stage is made of aluminum alloy and is a lightweight, slim and long stroke stage. It can be installed from both directions with M2 screws from the front side and M3 screws from the back side. As a standard part for positioning applications and as a machine element part such as jig tools

The posture can be adjusted by changing the tilt angle in the αβ axis direction. Rotating stage / screw feed stage.

Rotation can be adjusted 360 ° in the θ-axis direction. The movement guide uses a ground joint. With the coarse / fine movement switching function, fine adjustment with a micrometer head or screw type is also possible.

The long stage is made of aluminum alloy and is a lightweight, slim and long stroke stage. It can be installed from both directions with M2 screws from the front side and M3 screws from the back side. As a standard part for positioning applications and as a machine element part such as jig tools

It can be used properly according to the application, such as a strut tightening block type, a simple strut type, and a strut refraction mechanism type. The handles are aligned in the same direction to improve operability. A variety of arrangements for positioning operations in the air are possib... Read More

It is a compact integrated multi-function stage with a disk shape that is nearly 30% thinner than the combination of conventional products. X-axis, Y-axis, and rotary sliding are possible. As a standard part for positioning applications and as a machine element part such as jig tools

Rotation can be adjusted 360 ° in the θ-axis direction. The movement guide uses a ground joint. With the coarse / fine movement switching function, fine adjustment with a micrometer head or screw type is also possible. Multi-axis use is also possible by connecting to an X / XY axis stage.

Thin and lightweight, there are rack and pinion type and lead screw type, and we will try to differentiate by different size development from the skilled skill stage and deliver the original stage that is most suitable for usability. As a standard part for positioning applications and as a machin... Read More

It can be used properly according to the application, such as a strut tightening block type, a simple strut type, and a strut refraction mechanism type. The handles are aligned in the same direction to improve operability. A variety of arrangements for positioning operations in the air are possib... Read More

Long stroke movement in the Z-axis and X-axis directions is possible. The drive system is a screw feed type (pitch 2 mm) with a large handle. It can be connected to a 50 mm / 2 inch pitch optical surface plate, etc.

The posture can be adjusted by changing the tilt angle in the αβ axis direction. It can also be combined with a lab jack.

It can be used properly according to the application, such as a strut tightening block type, a simple strut type, and a strut refraction mechanism type. The handles are aligned in the same direction to improve operability. A variety of arrangements for positioning operations in the air are possib... Read More

It is a moving unit that uses a dovetail groove for the moving guide. A rack and pinion is used as the feed method, and a large amount of movement can be obtained. It can be widely used for positioning applications such as cameras and sensors. The base plate is sold separately. For positioning ca... Read More

It is a stage that uses aluminum alloy as the main material and has both rigidity and light weight. It can be widely used for precision positioning applications such as cameras, sensors, and workpieces. For precision positioning of cameras, sensors, workpieces, etc.