Motorized Stages
Other Related Pages
- SIGMAKOKI Connection cableA connection cable between the automatic stage and the controller or driver.from S$99.90Min. 2 days
- CHUO PRECISION INDUSTRIAL Cross LAN cable (2m)It is used for one-to-one Ethernet communication control of 2-axis and 3-axis QT-A series with a PC. This cable has general specifications according to the standard.Cable Length (m) 2 RoHS Directive 6 substancesfrom S$29.99Min. 2 days
- SIGMAKOKI Small automatic rotating stageIt is a stepping motor driven rotary stage that uses bearings for the guide and worm gear for the feed mechanism.Material (Stage) Aluminum / Aluminum Bronze Lost motion (°) 0.05 Current Consumption (mA) 15 or less Moving guide Bearing system Power Supply Voltage (V) DC5~24±10% origin sensor None Type Rotating stage Feed method Worm gearfrom S$1,299.00Min. 2 days
- SIGMAKOKI MINI cableA connection cable between the automatic stage and the controller or driverfrom S$88.99Min. 5 days
- SIGMAKOKI Single axis stage controllerA 1-axis stage controller with a built-in 5-phase stepping motor driver. External control by RS232C interface and jog drive by front panel jog switch and external I / O are possible. * Power supply specifications are DC + 24V 1.3A. You need to purchase PAT-001-POW1 (AC adapter) or prepare it by y... Read MoreStorage Temperature (℃) -20~60 Mass (kg) 0.4 Ambient Humidity (% RH) 20~80 Power Consumption (VA) 32 Outer dimensions, Width W x Height H x Depth D (mm) 47×90×125 Operating Temperature (℃) 5~40 Power Supply Voltage (V) DC24、1.3Afrom S$479.90Min. 2 days
- SIGMAKOKI Control pat / Joy patRequired for manual operation, memory settings, etc.Positioning accuracy (°) 0.1 Load capacity (N) 196 Suitable for FINE-01y、FINE-503 origin sensor Nonefrom S$189.90Min. 2 days
- CHUO PRECISION INDUSTRIAL Connection cable 1.5mCables that connect the controller / driver and the stage.Cable Length (m) 1.5 RoHS Directive 6 substancesfrom S$129.90Min. 6 days
- SIGMAKOKI Automatic rotating stageIt is a stepping motor driven rotary stage that uses bearings for the guide and worm gear for the feed mechanism. An automatic stage suitable for positioning for measurement / inspection / evaluation equipment. * Be careful when using it upside down or mounting it on a vertical surface. * Accurac... Read MoreMaterial (Stage) Aluminum / Aluminum Bronze Surface run out (mm) 0.02 Lost motion (°) 0.05 Backlash (°) 0.08 origin sensor None Type Rotating stage Feed method Worm gearfrom S$2,399.00Min. 13 days
- SIGMAKOKI DAC cableA connection cable between the automatic stage and the controller or driverfrom S$99.90Min. 5 days
- SIGMAKOKI 1 axis micro driver16 types of motor step angles from 1 to 250 can be set by an external signal. The drive target motor is a 0.3-1.4A / phase 5-phase stepping motor. By adjusting the RUN / STOP volume, it is possible to set the drive current and current when stopped.Frequency Maximum response / 500kpps Input Signal 2-clock input method Driving System Bipolar pentagon constant current drive excitation method Microstep Operating Temperature Range (℃) 0~40 Input Logic C-MOS equivalent negative logic input Outer dimensions, Width W x Height H x Depth D (mm) 91×36×70 Mass (kg) 0.2 Current (A) Drive / 0.3-1.4 / phasefrom S$349.90Min. 5 days
- SIGMAKOKI 2/4 axis stage controllerA 2-axis and 4-axis stage controller with a built-in microstep driver.Storage Temperature (℃) -20~60 Ambient Humidity (% RH) 20~80 Outer dimensions, Width W x Height H x Depth D (mm) 270×118×302 Operating Temperature (℃) 5~40 Power Supply Voltage (V) AC100~240、50/60Hzfrom S$4,499.00Min. 213 days
- Kohzu Precision Stepper motor driverFrequency (Maximum input pulse) 500kpps Operating humidity (% RH) 0 to 85 (no condensation) Operating Temperature (℃) 0~40 Driving System Bipolar constant current pentagon systemfrom S$259.90Min. 12 days
- CHUO PRECISION INDUSTRIAL RS-232C straight cableACB-RSS-2 is used to control QT-A series by serial communication. This cable has general specifications according to the standard. * Cable length 1.5m, straight cable.Cable Length (m) 1.5 Cable Type Interface cablefrom S$55.99Min. 13 days
- SIGMAKOKI XY axis assembly plateThis is a special plate used when you purchase a single shaft of an automatic stage and then combine it with the XY shaft yourself.from S$47.99Min. 5 days
- Hitachi Kokusai Electric USB3 Vision interface model[USB 3 Vision interface model] The camera interface using the USB 3.0 interface has a bandwidth of 3.5 Gbps, which is about 10 times that of USB 2.0, and is capable of high-speed transmission equivalent to Camera Link (Medium). A simple and low-cost system can be constructed by two-way communicat... Read MoreImage Size (Output) 1600 (H) x 1200 (D) Image Sensor 1/1.8 CMOS Number of Effective Pixel 1600(H)×1200(V) Pixel size (μm) 4.5 (H) x 4.5 (V) (square pixel) S/N Ratio 45 Shock Resistance (m/s2) 490.3 or less (XYZ direction) Frame Rate 53 frames / second Image area (mm) 7.2(H)×5.4(V) Power Consumption (W) About 1.6 (320mA) Mass (g) Approximately 45 (excluding lens) Lens mount C mount (flange back = 17.526mm) Power Supply DC5V ± 5% (via USB connector) Gamma OFF(γ= 1)/LUT(0.45~1) Gain Set 0 to 18dB in 1dB increments Interface USB3.0 interface Synchronization Type internal Scanning method progressivefrom S$2,899.00Min. 9 days
- SIGMAKOKI Sigma Fine StageResolution 10nm (when closed) Stroke (X distance) (mm) 0.1±15% Type xy stage Stroke (Y distance) (mm) 0.1±15% table length (mm) 60 Load capacity (N) 14.7 table width (mm) 60from S$7,599.00Min. 5 days
- Kohzu Precision Small actuatorA low-priced actuator that combines a compact, high-performance stepping motor and precision grinding screws. It can be automated by replacing the manufacturer's manual stage or the micrometer head of the mirror holder. It can be driven by the manufacturer's stepping motor controller. * C... Read MoreRepeated positioning accuracy (mm) 0.003 Lost motion (mm) 0.005 Resolution (μm) 0.1 (minimum response / reference) RoHS Directive 10 substances Allowable Load (N) 29.4 (static load) Motor Type PK513PB-C9(□20mm) Lead Screw (mm) Precision grinding screw Φ4, lead 0.5from S$799.90Min. 9 days
- CHUO PRECISION INDUSTRIAL High grade stageA small automatic stage with a 40 mm square stage surface and a stepping motor. A high-rigidity stage that uses the HG-VCR method for the movement guide. The lead screw uses a threaded screw and is cheaper than the conventional product. It can be widely used for precision positioning applications... Read MoreLost motion (mm) 0.002 Resolution (mm) 0.002 Positioning accuracy (mm) 0.014 XY orthogonality (mm) 0.015 Mass (kg) 0.64 lead screw lead (mm) 1 RoHS Directive 10 substances Maximum speed (mm / s) 16 (at 8000pps) Load capacity (N) 39.2(4kgf) Stage dimensions (mm) 40×40 Suitable Cable ACB-STM2、ACB-STM3 Material Aluminum alloy Surface Treatment Black alumite pear Specification Economy type Moving guide HG-VCR (V groove and cross roller) Lead Screw Type Rolled ball screw Direction of movement XY axis 2 directions Repeatability (mm) ±0.0005 Movement distance (mm) ±7.5from S$2,599.00Min. 6 days
- CHUO PRECISION INDUSTRIAL X stageA small automatic stage that uses a 20 mm square 5-phase stepping motor. The ballway is used as a movement guide. It can be widely used for precision positioning applications such as cameras, sensors, and workpieces.Resolution (mm) 0.002 Lost motion (mm) 0.007 Positioning accuracy (mm) 0.02 Mass (kg) 0.27 lead screw lead (mm) 1 RoHS Directive 10 substances Maximum speed (mm / s) 16 (at 8000pps) Load capacity (N) 19.6(2kgf) Stage dimensions (mm) 30×30 Specification Ball screw specifications Moving guide Ballway Suitable Cable Dedicated cable (ACB-STT2) included Surface Treatment Low temperature black chrome plating Material Stainless steel Direction of movement X axis 1 direction Type x stage Repeatability (mm) ±0.001 Movement distance (mm) ±25from S$2,299.00Min. 8 days
- CHUO PRECISION INDUSTRIAL Z elevating stageA high-precision Z elevating stage that uses a V-groove and a cross roller for the movement guide. There are precision screws and ball screws for lead screws. It can be widely used for precision positioning applications such as cameras, sensors, and workpieces. * Please note that the sensor and s... Read MoreResolution (mm) 0.001 Lost motion (mm) 0.003 Positioning accuracy (mm) 0.01 Mass (kg) 0.7 Movement distance (mm) 0~5 lead screw lead (mm) 1 RoHS Directive 10 substances Maximum speed (mm / s) 5 (at 5000pps) Stage dimensions (mm) 60×60 Suitable Cable ACB-STM2、ACB-STM3 Material Aluminum alloy Specification Ball screw specifications Surface Treatment Black alumite pear Load capacity (N) CK1799CU1799:29.4(3kgf) Moving guide V groove and cross roller Direction of movement Z axis 1 direction Type z stage Repeatability (mm) ±0.001from S$2,999.00Min. 6 days
- CHUO PRECISION INDUSTRIAL Auto microResolution (mm) 0.00002 Positioning accuracy (mm) 0.015 Mass (kg) 0.27 Maximum speed (mm / s) 0.3 (at 15000PPS) lead screw lead (mm) 0.5 Movement distance (mm) 0~30 Mounting Diameter (Φmm) 10 0-0.009 RoHS Directive 10 substances thrust (N) 98(10kgf) Cable Length (m) About 1.5 Surface Treatment Black chrome reduction unit Reduction ratio 150 Material Steel Specification Stepping motor specifications Repeatability (mm) ±0.003from S$2,399.00Min. 33 days
- CHUO PRECISION INDUSTRIAL High-grade rotating stageA rotary stage with improved runout and surface runout by using angular bearings for the movement guide. There is a Φ16mm through hole in the center. It can be widely used for precision positioning applications such as cameras, sensors, and workpieces. Please contact us for custom-made products s... Read MoreResolution 0.01° Lost motion (°) 0.02 Surface run out (mm) 0.03 Positioning accuracy (°) 0.05 Parallelism (mm) 0.075 Mass (kg) 0.6 RoHS Directive 10 substances Length of movement 360° Load capacity (N) 39.2(4kgf) maximum speed 50 (at 5000pps) Suitable Cable ACB-STM2、ACB-STM3 Material Aluminum alloy Moving guide Angular bearing Surface Treatment Black alumite pear Direction of movement Direction of rotation Dimension (mm) Heart shake: 0.005 Type Rotating stage Repeatability ±0.003° Stage dimensions (mm) Φ60from S$2,599.00Min. 6 days
- Kohzu Precision Automatic XY stageNew product "SX stage" series that realizes low price, high accuracy and short delivery time. A long stroke automatic X stage that uses a precision cross roller guide. I am using clean grease. The feed method uses a ball screw with excellent durability. Uses a 5-phase stepping motor. We... Read MoreLead (mm) 1 RoHS Directive 10 substances Material Aluminum alloy Feed method Ball screw Moving guide Precision cross roller guide Connector Shape Round 20 pin (Hirose: RP13A-12JG-20PC) Color White finish Type xy stage Repeatability (μm) ≤ ± 0.3 (positioning) Backlash ≦0.2μmfrom S$2,999.00Min. 18 days
- SIGMAKOKI Small automatic gonio stageAn automatic goniometer stage driven by a stepping motor that uses a cross roller guide. A highly rigid goniometer stage that uses a cross roller guide with excellent wear resistance. The height of the center of rotation from the table surface is available in 75 mm / 100 mm / 130 mm, and you can ... Read MoreMaterial (Stage) Aluminum Surface Treatment (Stage) Black alumite Load capacity (N) 24.5 table width (mm) 60 table length (mm) 60 Moving guide Cross roller origin sensor None Type Tilt stage Feed method Warm and worm wheel Positioning accuracy (°) ±0.004from S$2,599.00Min. 5 days
- SIGMAKOKI Automatic polarizer holderAccuracy (mm) Runout / 0.02 Travel distance (°) 30/s Lost motion (°) 0.05 Positioning accuracy (°) 0.02 Mass (kg) 0.5from S$2,599.00Min. 5 days
- SIGMAKOKI General-purpose terminal softwareSpecification General-purpose terminal softwarefrom S$479.90Min. 5 days
- Kohzu Precision Handy terminal (for CRUX)Specification Handy terminal (for CRUX)from S$299.90Min. 12 days
- Kohzu Precision Stepping motor controller (master controller)Movement distance (mm) -134,217,728~+134,217,727 pulse Operating Temperature (℃) 0~40 Mass (kg) 1.2 Outer Dimensions, Width W x Depth D x Height H (mm) 213.4×290×52.4 Operating humidity (% RH) 30-85 (without condensation) Power Consumption (VA) 35MAX (AC100V supply) Input power (V) AC90~240、50/60Hz Specification Link method: Motionnetfrom S$2,399.00Min. 12 days
- SIGMAKOKI Sigma Fine StageResolution 10nm (when closed) Type Z stage Stroke (Z distance) (mm) 0.1±15%from S$3,999.00Min. 5 days
- CHUO PRECISION INDUSTRIAL XY stage ballA small automatic stage that uses a 20 mm square 5-phase stepping motor. The ballway is used as a movement guide. It can be widely used for precision positioning applications such as cameras, sensors, and workpieces.Resolution (mm) 0.002 Lost motion (mm) 0.007 XY orthogonality (mm) 0.01 Positioning accuracy (mm) 0.02 Mass (kg) 0.55 lead screw lead (mm) 1 RoHS Directive 10 substances Load capacity (N) 14.7(1.5kgf) Maximum speed (mm / s) 16 (at 8000pps) Stage dimensions (mm) 30×30 Moving guide Ballway Suitable Cable Dedicated cable (ACB-STT2) included Surface Treatment Low temperature black chrome plating Specification Screw specifications (standard type) Material Stainless steel Direction of movement XY axis 2 directions Type xy stage Repeatability (mm) ±0.001 Movement distance (mm) ±25from S$4,599.00Min. 8 days
- CHUO PRECISION INDUSTRIAL XY stageA small automatic stage that uses a 2 mm square 5-phase stepping motor. The ballway is used as a movement guide. It can be widely used for precision positioning applications such as cameras, sensors, and workpieces.Resolution (mm) 0.002 Lost motion (mm) 0.007 XY orthogonality (mm) 0.01 Positioning accuracy (mm) 0.02 Mass (kg) 0.55 lead screw lead (mm) 1 RoHS Directive 10 substances Load capacity (N) 14.7(1.5kgf) Maximum speed (mm / s) 16 (at 8000pps) Stage dimensions (mm) 30×30 Moving guide Ballway Suitable Cable Dedicated cable (ACB-STT2) included Surface Treatment Low temperature black chrome plating Material Stainless steel Direction of movement XY axis 2 directions Type xy stage Repeatability (mm) ±0.001 Movement distance (mm) ±25from S$4,599.00Min. 8 days
Filter by categories