All Category

Plastic Bearings with Threaded Shaft

View : Grid List
Filter

Items 1 - 40 of 44

Set Ascending Direction
  1. Resin Bearing DR-B (Thread Shaft PLANE Type) TYPE7
    TOK Bearing Resin Bearing DR-B (Thread Shaft PLANE Type) TYPE7
    Plastic bearings made of polyacetal resin for the outer race and steel for the balls and inner race. Drawers for desks, cabinets, vending machines, refrigerators, etc. * The part where the radius is displayed in the dimensional drawing such as Dimension D is not the radius but the diameter.
    Screw Dimensions  M6×1 
    Rating:
    96%
    from S$0.99
    Min. 2 days
  2. Resin Bearing DR-B (Thread Shaft PLANE Type) TYPE6
    TOK Bearing Resin Bearing DR-B (Thread Shaft PLANE Type) TYPE6
    Plastic bearings made of polyacetal resin for the outer race and steel for the balls and inner race. Drawers for desks, cabinets, vending machines, refrigerators, etc. * The part where the radius is displayed in the dimensional drawing such as Dimension D is not the radius but the diameter.
    Rating:
    93%
    from S$0.93
    Min. 2 days
  3. Resin Bearing IDS (High Duty / Metal Insert Molding) TYPE2
    TOK Bearing Resin Bearing IDS (High Duty / Metal Insert Molding) TYPE2
    It is a type that supports high loads by insert molding metal rings and steel bearings. Drawers for desks, cabinets, vending machines, refrigerators, etc.
    Dimension W1 (mm)  Dimension d (mm)  Dimension d1 (mm)  Dimension W2 (mm)  Nominal d2 × θ (mm × °)  Screw Dimensions  M6×1 
    Rating:
    90%
    from S$2.99
    Min. 2 days
  4. Tok bearing (TOK)  Resin bearing  DO (outer ring R type)  TYPE3
    TOK Bearing Tok bearing (TOK) Resin bearing DO (outer ring R type) TYPE3
    Plastic bearings made of polyacetal resin for the outer race and steel for the balls and inner race. Drawers for desks, cabinets, vending machines, refrigerators, etc. * The part where the radius is displayed in the dimensional drawing such as Dimension D is not the radius but the diameter.
    Screw Dimensions  M6×1 
    Rating:
    91%
    from S$1.29
    Min. 2 days
  5. Resin Bearing DU (Outer Ring U CONCAVED Groove Type) TYPE2
    TOK Bearing Resin Bearing DU (Outer Ring U CONCAVED Groove Type) TYPE2
    Plastic bearings made of polyacetal resin for the outer race and steel for the balls and inner race. Drawers for desks, cabinets, vending machines, refrigerators, etc. * The part where the radius is displayed in the dimensional drawing such as Dimension D is not the radius but the diameter.
    Dimension L (mm)  8(±0.5)  Screw Dimensions  M6×1 
    Rating:
    96%
    from S$1.29
    Min. 2 days
  6. Resin Bearing E-6B Type
    EASTERN SEIKO Resin Bearing E-6B Type
    High load design with excellent wear resistance. Compared to iron, the outer circumference has a noise and vibration absorption effect. Guide roller, door roller, presser / steady roller.
    Operating Temperature Range  -20~80℃  Accuracy Class  JIS B 1514 Class 0 
    Rating:
    93%
    from S$15.99
    Min. 2 days
  7. Steel Bearing AS TYPE6
    TOK Bearing Steel Bearing AS TYPE6
    It is a type that supports high loads by insert molding metal rings and steel bearings. Drawers for desks, cabinets, vending machines, refrigerators, etc.
    Allowable load (N [kgf])  686[70]  Width (mm)  Dimension W (mm)  8(±0.2)  Screw Dimensions  M6×1  Dimension d (mm)  Dimension d1 (mm)  Nominal d2 × θ (mm × °) 
    Rating:
    95%
    from S$2.89
    Min. 2 days
  8. Steel bearing A TYPE3
    TOK Bearing Steel bearing A TYPE3
    It is a type that supports high loads by insert molding metal rings and steel bearings. Drawers for desks, cabinets, vending machines, refrigerators, etc.
    Dimension L (mm)  11(±0.5)  Dimension C (mm)  2.8(±0.4)  Outer Diameter (Φmm)  22  Dimension D (mm)  22(±0.1)  Dimension W (mm)  Width (mm)  Allowable load (N [kgf])  784[80](300r.p.m)  Screw Dimensions  M6×1 
    Rating:
    95%
    from S$2.69
    Min. 2 days
  9. Resin bearing DR-B (screw shaft type) TYPE8
    TOK Bearing Resin bearing DR-B (screw shaft type) TYPE8
    Plastic bearings made of polyacetal resin for the outer race and steel for the balls and inner race. Drawers for desks, cabinets, vending machines, refrigerators, etc. * The part where the radius is displayed in the dimensional drawing such as Dimension D is not the radius but the diameter.
    Dimension L (mm)  11(±0.5)  Allowable load (N [kgf])  196[20](300r.p.m)  Width (mm)  Dimension W (mm)  7(0~-0.2)  Screw Dimensions  M6×1 
    Rating:
    93%
    from S$2.29
    Min. 2 days
  10. Plastic bearing DL (roller with screw shaft) TYPE2
    TOK Bearing Plastic bearing DL (roller with screw shaft) TYPE2
    Dimension C (mm)  1.6(±0.1)  Width (mm)  Dimension W (mm)  6.6(-0.2~0)  Dimension L (mm)  8(±0.5)  Screw Dimensions  M6×1 
    Rating:
    100%
    from S$0.76
    Min. 2 days
  11. Resin bearing EO-6B type
    EASTERN SEIKO Resin bearing EO-6B type
    High load design with excellent wear resistance. Compared to iron, the outer circumference has a noise and vibration absorption effect. Guide roller, door roller, presser / steady roller.
    Operating Temperature Range  -20~80℃  Accuracy Class  JIS B 1514 Class 0 
    Rating:
    100%
    from S$15.99
    Min. 2 days
  12. Resin bearing IDS (High load / metal insert molding) TYPE3
    TOK Bearing Resin bearing IDS (High load / metal insert molding) TYPE3
    Dimension L (mm)  11(±0.2)  Dimension C (mm)  2(±0.4)  Outer Diameter (Φmm)  26  Dimension D (mm)  26(-0.2~0)  Allowable load (N [kgf])  588[60](300r.p.m)  Width (mm)  Dimension W (mm)  8(±0.2)  Screw Dimensions  M6×1 
    from S$5.59
    Min. 2 days
  13. Steel bearing A TYPE2
    TOK Bearing Steel bearing A TYPE2
    Outer Diameter (Φmm)  19  Allowable load (N [kgf])  490[50](300r.p.m)  Width (mm)  Screw Dimensions  M6×1  Nominal d2 × θ (mm × °)  Dimension d1 (mm)  Dimension d (mm) 
    Rating:
    100%
    from S$2.39
    Min. 2 days
  14. Resin bearing EU-B type
    EASTERN SEIKO Resin bearing EU-B type
    High load design with excellent wear resistance. Compared to iron, the outer circumference has a noise and vibration absorption effect. Tension using guide rollers, doors (hanging doors), pulleys, and wires.
    Operating Temperature Range  -20~80℃  Flange Thickness (mm)  0.5  Dimension r (mm)  2.5  Screw Length (mm)  Accuracy Class  JIS B 1514 Class 0  Screw Dimensions  M6×1.00 
    Rating:
    40%
    from S$15.99
    Min. 2 days
  15. Resin bearing DV (Outer ring V groove type) TYPE2
    TOK Bearing Resin bearing DV (Outer ring V groove type) TYPE2
    Plastic bearings made of polyacetal resin for the outer race and steel for the balls and inner race. Drawers for desks, cabinets, vending machines, refrigerators, etc. * The part where the radius is displayed in the dimensional drawing such as Dimension D is not the radius but the diameter.
    Screw Dimensions  M6×1  Dimension W1 (mm)  Dimension d1 (mm)  Nominal d2 × θ (mm × °)  Dimension d (mm)  Dimension W2 (mm) 
    Rating:
    40%
    from S$1.79
    Min. 2 days
  16. Resin bearing EU-6B type
    EASTERN SEIKO Resin bearing EU-6B type
    High load design with excellent wear resistance. Compared to iron, the outer circumference has a noise and vibration absorption effect. Tension using guide rollers, doors (hanging doors), pulleys, and wires.
    Operating Temperature Range  -20~80℃  Flange Thickness (mm)  0.5  Dimension r (mm)  2.5  Hex Hole Size Across Flats (mm)  2.5  Screw Length (mm)  Accuracy Class  JIS B 1514 Class 0  Screw Dimensions  M6×1.00 
    Rating:
    80%
    from S$15.99
    Min. 2 days
  17. Resin bearing DF (Outer ring flange type) TYPE1
    TOK Bearing Resin bearing DF (Outer ring flange type) TYPE1
    Plastic bearings made of polyacetal resin for the outer race and steel for the balls and inner race. Drawers for desks, cabinets, vending machines, refrigerators, etc. * The part where the radius is displayed in the dimensional drawing such as Dimension D is not the radius but the diameter.
    Dimension C (mm)  0.5(±0.4)  Dimension L (mm)  8(±0.5)  Screw Dimensions  M6×1 
    Rating:
    60%
    from S$2.59
    Min. 2 days
  18. Plastic bearing EB type
    EASTERN SEIKO Plastic bearing EB type
    High load design with excellent wear resistance. Compared to iron, the outer circumference has a noise and vibration absorption effect. Guide roller, door roller, presser / steady roller.
    Operating Temperature Range  -20~80℃  Flange Thickness (mm)  Screw Length (mm)  Accuracy Class  JIS B 1514 Class 0  Screw Dimensions  M6×1.00 
    from S$15.99
    Min. 2 days
  19. Resin bearing IN (High load / Metal insert molding / PA tire) TYPE2
    TOK Bearing Resin bearing IN (High load / Metal insert molding / PA tire) TYPE2
    Outer Diameter (Φmm)  19  Dimension D (mm)  19(-0.3~0)  Allowable load (N [kgf])  196[20](300r.p.m)  Width (mm)  Dimension W (mm)  7(±0.2)  Dimension L (mm)  8(±0.5)  Screw Dimensions  M6×1 
    from S$2.99
    Min. 2 days
  20. Resin bearing EO-B type
    EASTERN SEIKO Resin bearing EO-B type
    High load design with excellent wear resistance. Compared to iron, the outer circumference has a noise and vibration absorption effect. Guide roller, door roller, presser / steady roller.
    Operating Temperature Range  -20~80℃  Dimension r (mm)  Screw Length (mm)  Accuracy Class  JIS B 1514 Class 0  Screw Dimensions  M6×1.00 
    from S$14.99
    Min. 2 days
  21. Resin bearing DR-S (stainless steel type) TYPE16
    TOK Bearing Resin bearing DR-S (stainless steel type) TYPE16
    Drawers for desks, cabinets, vending machines, refrigerators, etc. * The part where the radius is displayed in the dimensional drawing such as Dimension D is not the radius but the diameter.
    Dimension C (mm)  0.5(±0.4)  Outer Diameter (Φmm)  19  Dimension D (mm)  19(-0.1~0)  Width (mm)  Dimension W (mm)  6(-0.2~0)  Dimension L (mm)  8(±0.5)  Screw Dimensions  M6×1 
    Rating:
    40%
    from S$7.99
    Min. 2 days
  22. Resin bearing DH (Outer ring groove type) TYPE2
    TOK Bearing Resin bearing DH (Outer ring groove type) TYPE2
    Plastic bearings made of polyacetal resin for the outer race and steel for the balls and inner race. Drawers for desks, cabinets, vending machines, refrigerators, etc. * The part where the radius is displayed in the dimensional drawing such as Dimension D is not the radius but the diameter.
    Dimension C (mm)  0.5(±0.4)  Dimension L (mm)  8(±0.5)  Screw Dimensions  M6×1 
    Rating:
    60%
    from S$3.19
    Min. 3 days
  23. Resin bearing EV-B type
    EASTERN SEIKO Resin bearing EV-B type
    High load design with excellent wear resistance. Compared to iron, the outer circumference has a noise and vibration absorption effect. Tension using doors, pulleys and wires.
    Operating Temperature Range  -20~80℃  Flange Thickness (mm)  0.5  Dimension r (mm)  0.6  Angle M (°)  60  Screw Length (mm)  Accuracy Class  JIS B 1514 Class 0  Screw Dimensions  M6×1.00 
    from S$14.99
    Min. 2 days
  24. Resin bearing E series flat type hexagon socket
    TRUSCO Resin bearing E series flat type hexagon socket
    from S$22.99
    Min. 2 days
  25. Resin bearing EV-6B type
    EASTERN SEIKO Resin bearing EV-6B type
    High load design with excellent wear resistance. Compared to iron, the outer circumference has a noise and vibration absorption effect. Tension using doors, pulleys and wires.
    Operating Temperature Range  -20~80℃  Flange Thickness (mm)  0.5  Dimension r (mm)  0.6  Hex Hole Size Across Flats (mm)  2.5  Angle M (°)  60  Screw Length (mm)  Accuracy Class  JIS B 1514 Class 0  Screw Dimensions  M6×1.00 
    from S$17.99
    Min. 2 days
  26. Resin bearing + (hexagon screw hole type)
    TOK Resin bearing + (hexagon screw hole type)
    By using a hexagon wrench, it can be installed with a high tightening force. By using plastic, it is difficult to damage the transported object. Due to the self-lubricating property of plastic, it is hard to break immediately even if grease runs out. Transport guide wire pulley, etc. * Be careful... Read More
    Flange Thickness (mm)  0.5  Dimension R (mm)  0.6  Operating Temperature Range (℃)  0~40  Angle M (°)  60  Width (mm)  Screw Length (mm)  Hexagon socket B (mm)  Call 4  Screw Dimensions  Roller: M6 
    from S$7.49
    Min. 3 days
  27. Resin bearing
    TOK Bearing Resin bearing
    By using plastic, it is difficult to damage the transported object. Due to the self-lubricating property of plastic, it is hard to break immediately even if grease runs out. Transport guide, etc. * Be careful not to apply a load in the axial direction.
    from S$2.29
    Min. 3 days
  28. Resin bearing + (hexagon screw hole type)
    TOK Resin bearing + (hexagon screw hole type)
    By using a hexagon wrench, it can be installed with a high tightening force. By using plastic, it is difficult to damage the transported object. Due to the self-lubricating property of plastic, it is hard to break immediately even if grease runs out. By using conductive resin and conductive greas... Read More
    Flange Thickness (mm)  0.5  Operating Temperature Range (℃)  0~40  Width (mm)  Screw Length (mm)  Hexagon socket B (mm)  Call 4  Screw Dimensions  Roller: M6 
    from S$13.99
    Min. 3 days
  29. Resin Bearing
    TOK Resin Bearing
    By using a hexagon wrench, it can be installed with a high tightening force. By using plastic, it is difficult to damage the transported object. Due to the self-lubricating property of plastic, it is hard to break immediately even if grease runs out. Transport guide etc. * Be careful not to apply... Read More
    Flange Thickness (mm)  0.5  Operating Temperature Range (℃)  0~40  Width (mm)  Screw Length (mm)  Hexagon socket B (mm)  Call 4  load (N)  Estimated: 196  Screw Dimensions  Roller: M6 
    from S$6.19
    Min. 2 days
  30. Resin bearing IDS (High load / metal insert molding) TYPE1
    TOK Bearing Resin bearing IDS (High load / metal insert molding) TYPE1
    Dimension L (mm)  3.5(±0.2) 
    from S$2.69
    Min. 6 days
  31. Resin bearing + (hexagon screw hole type)
    TOK Resin bearing + (hexagon screw hole type)
    By using a hexagon wrench, it can be installed with a high tightening force. By using plastic, it is difficult to damage the transported object. Due to the self-lubricating property of plastic, it is hard to break immediately even if grease runs out. Transport guide, etc. * Be careful not to appl... Read More
    Flange Thickness (mm)  0.5  Operating Temperature Range (℃)  0~40  Trusco Part No.  116-5031  Dimension D1 (mm)  19  Dimension G (mm)  Outer Diameter (mm)  22  Width (mm)  Screw Length (mm)  Mass (g)  Hexagon socket B (mm)  Call 4  Screw Dimensions  Roller: M6 
    from S$7.49
    Min. 3 days
  32. Resin Bearing (Hexagon Screw Hole Type)
    TOK Resin Bearing (Hexagon Screw Hole Type)
    By using a hexagon wrench, it can be installed with a high tightening force. By using plastic, it is difficult to damage the transported object. Due to the self-lubricating property of plastic, it is hard to break immediately even if grease runs out. Transport guide pulley, etc. * Be careful not ... Read More
    Flange Thickness (mm)  0.5  Operating Temperature Range (℃)  0~40  Width (mm)  Screw Length (mm)  Hexagon socket B (mm)  Call 4  Screw Dimensions  Roller: M6 
    from S$7.49
    Min. 2 days
  33. D Series DO (Convex Convex R)
    TOK Bearing D Series DO (Convex Convex R)
    Plastic bearings made of polyacetal resin (POM) for the outer race and steel for the balls and inner race. * The part where the radius is displayed in the dimensional drawing such as Dimension D is not the radius but the diameter.
    Discontinued
  34. Resin bearing + (hexagon screw hole type)
    TOK Resin bearing + (hexagon screw hole type)
    By using a hexagon wrench, it can be installed with a high tightening force. By using plastic, it is difficult to damage the transported object. Due to the self-lubricating property of plastic, it is hard to break immediately even if grease runs out. Transport guide, etc. * Be careful not to appl... Read More
    Flange Thickness (mm)  0.5  Operating Temperature Range (℃)  0~40  Trusco Part No.  116-5031  Dimension D1 (mm)  19  Dimension G (mm)  Outer Diameter (mm)  22  Width (mm)  Screw Length (mm)  Mass (g)  Hexagon socket B (mm)  Call 4  Screw Dimensions  Roller: M6 
    Discontinued
  35. Resin bearing + (hexagon screw hole type)
    TOK Resin bearing + (hexagon screw hole type)
    By using a hexagon wrench, it can be installed with a high tightening force. By using plastic, it is difficult to damage the transported object. Due to the self-lubricating property of plastic, it is hard to break immediately even if grease runs out. Transport guide pulley, etc. * Be careful not ... Read More
    Flange Thickness (mm)  0.5  Operating Temperature Range (℃)  0~40  Width (mm)  Screw Length (mm)  Hexagon socket B (mm)  Call 4  Screw Dimensions  Roller: M6 
    Discontinued
  36. D Series DH (Outer groove)
    TOK Bearing D Series DH (Outer groove)
    Plastic bearings made of polyacetal resin (POM) for the outer race and steel for the balls and inner race. * The part where the radius is displayed in the dimensional drawing such as Dimension D is not the radius but the diameter.
    Discontinued
  37. D series DV (peripheral V groove)
    TOK Bearing D series DV (peripheral V groove)
    Plastic bearings made of polyacetal resin (POM) for the outer race and steel for the balls and inner race. * The part where the radius is displayed in the dimensional drawing such as Dimension D is not the radius but the diameter.
    Discontinued
  38. A series
    TOK Bearing A series
    Discontinued
  39. Resin bearing + (hexagon screw hole type)
    TOK Resin bearing + (hexagon screw hole type)
    By using a hexagon wrench, it can be installed with a high tightening force. By using plastic, it is difficult to damage the transported object. Due to the self-lubricating property of plastic, it is hard to break immediately even if grease runs out. Transport guide wire pulley, etc. * Be careful... Read More
    Flange Thickness (mm)  0.5  Dimension R (mm)  0.6  Operating Temperature Range (℃)  0~40  Angle M (°)  60  Width (mm)  Screw Length (mm)  Hexagon socket B (mm)  Call 4  Screw Dimensions  Roller: M6 
    Discontinued
  40. D series DR-B (Flat outer circumference, screw shaft type)
    TOK Bearing D series DR-B (Flat outer circumference, screw shaft type)
    Plastic bearings made of polyacetal resin (POM) for the outer race and steel for the balls and inner race. * The part where the radius is displayed in the dimensional drawing such as Dimension D is not the radius but the diameter.
    Screw Dimensions  M6×1 
    Discontinued
View : Grid List
Filter

Items 1 - 40 of 44

Set Ascending Direction