Rod Ends
What are rod end / ring ball / spherical plain bearings? Spherical plain bearings are bearings that are highly resistant to eccentricity and oscillation. Link ball with ball stud and rod end suitable for mounting on the rod end also have a spherical plain bearing. It has features such as a link ball that is strong against pulling and withstands flooding of the spherical surface, a rod end that achieves joint-like movement, and a spherical plain bearing that can withstand high loads at low torque. It is used in aircraft and railway fields, and the most suitable bearing is selected for each purpose.
Other Related Pages
ASAHI SEIKO Join Ball Male Threaded Rod End FDM Type (Stainless Steel Series)RoHS directive (corresponding to 10 substances) Correspondencefrom S$49.99Min. 2 days- IKO (NIPPON THOMPSON) Pillow ball POS (with external thread, lubricated, right-hand thread)A self-aligning spherical plain bearing that can simultaneously load a large radial load and an axial load in both directions with a small capacity. The pillow ball rod end is easy to install because the main body is machined with female or male threads. It is used in control mechanisms and link ... Read MoreSpecification 1N≒0.102kgf Material Chrome plating (spherical inner ring) Material (Main Unit) Zinc chromate Type With male thread Material (Bushing) Special copper alloy Screw direction Right-handed screw Lubrication type Refueling type
-
- THK Link Ball BL Type (Right-hand Thread Type)It is an RBL type compact type, and a strong zinc alloy is used for the holder, and the holder is formed at right angles to the shank with balls. By arranging grease pockets on the top and bottom of the spherical surface, it has good lubricity and excellent wear resistance.Type Right-hand thread type JIS Class JIS Class 2 RoHS directive (corresponding to 10 substances) Correspondence
- CCTY Bearing Japan Rod end (Oil-free male thread) Right-hand thread typeA spherical plain bearing that uses a spherical inner ring with the same accuracy and hardness as a steel ball for bearings, and is used for mounting the rod end of rocking motion.Type Right-handed screw RoHS directive (corresponding to 10 substances) Correspondence
- CCTY Bearing Japan Rod end (Oil-free female thread) Right-hand thread typeA spherical plain bearing that uses a spherical inner ring with the same accuracy and hardness as a steel ball for bearings, and is used for mounting the rod end of rocking motion.Type Right-handed screw RoHS directive (corresponding to 10 substances) Correspondence
- THK Link Ball BL Type (Left-Hand Thread Type)It is an RBL type compact type, and a strong zinc alloy is used for the holder, and the holder is formed at right angles to the shank with balls. By arranging grease pockets on the top and bottom of the spherical surface, it has good lubricity and excellent wear resistance.Type Left-hand thread type JIS Class JIS Class 2 RoHS directive (corresponding to 10 substances) Correspondence
- THK Rod end POS type (Right thread type)The structure has a special alloy inserted between the colored chromate-treated steel holder and the hard chrome-plated spherical inner ring, resulting in high rigidity and excellent wear resistance and corrosion resistance. The holder terminal is a male screw type. * Please use after lubricating... Read MoreType Right-hand thread type JIS Class JIS Class 2 RoHS directive (corresponding to 10 substances) Correspondence
- THK Rod End NHS T Type (Right-Hand Thread Type)An oil-free type in which a self-lubricating synthetic resin is molded between the steel holder and the inner ring of the spherical surface. The clearance on the slip surface is minimized and accurate link motion can be obtained.Type Right-hand thread type JIS Class JIS Class 2 RoHS directive (corresponding to 10 substances) Correspondence
- CCTY Bearing Japan Rod end (Oil-free male thread) Left-hand thread typeA spherical plain bearing that uses a spherical inner ring with the same accuracy and hardness as a steel ball for bearings, and is used for mounting the rod end of rocking motion.Type Left-hand thread RoHS directive (corresponding to 10 substances) Correspondence
- THK Rod End PHS Type (Right-Hand Thread Type)High rigidity and excellent wear and corrosion resistance due to the structure in which a familiar special alloy is inserted between the steel holder treated with colored chromate and the spherical inner ring treated with hard chrome plating. Grease can be properly lubricated to the sliding surfa... Read MoreType Right-hand thread type JIS Class JIS Class 2 RoHS directive (corresponding to 10 substances) Correspondence
- THK Rod End NOS T Type (Right-Hand Thread Type)An oil-free type in which a self-lubricating synthetic resin is molded between the steel holder and the inner ring of the spherical surface. The clearance on the slip surface is minimized and accurate link motion can be obtained. It is a type with a male screw holder terminal.Type Right-hand thread type JIS Class JIS Class 2 RoHS directive (corresponding to 10 substances) Correspondence
- THK Rod end POS type (left-hand thread type)The structure has a special alloy inserted between the colored chromate-treated steel holder and the hard chrome-plated spherical inner ring, resulting in high rigidity and excellent wear resistance and corrosion resistance. The holder terminal is a male screw type. * Please use after lubricating... Read MoreType Left-hand thread type JIS Class JIS Class 2 RoHS directive (corresponding to 10 substances) Correspondence
- IKO (NIPPON THOMPSON) Pillow ball POSEC (with external thread, oil-free, right-hand thread)A self-aligning spherical plain bearing that can simultaneously load a large radial load and an axial load in both directions with a small capacity. The pillow ball rod end is easy to install because the main body is machined with female or male threads. It is used in control mechanisms and link ... Read MoreSpecification 1N≒0.102kgf Material Chrome plating (spherical inner ring) Material (Main Unit) Zinc chromate Type With male thread Material (Bushing) Special copper alloy Screw direction Right-handed screw Lubrication type Oil-free type
- THK Ring Ball RBI Type (Right-Hand Thread Type)A series in which the shaft and holder are on the same line, a tensile compression load can be applied, and smooth rotation can be obtained.Type Right-hand thread type JIS Class JIS Class 2
- IKO (NIPPON THOMPSON) Pillow ball PHS □ EC (with female thread, oil-free, right-hand thread)A self-aligning spherical plain bearing that can simultaneously load a large radial load and an axial load in both directions with a small capacity. The pillow ball rod end is easy to install because the main body is machined with female or male threads. It is used in control mechanisms and link ... Read MoreMaterial Chrome plating (spherical inner ring) Material (Main Unit) Zinc chromate Type With female thread Material (Bushing) Special copper alloy Screw direction Right-handed screw Lubrication type Oil-free type
- CCTY Bearing Japan Rod end (Oil-free female thread) Left-hand thread typeA spherical plain bearing that uses a spherical inner ring with the same accuracy and hardness as a steel ball for bearings, and is used for mounting the rod end of rocking motion.Type Left-hand thread RoHS directive (corresponding to 10 substances) Correspondence
- THK Rod End PHS Type (Left-Hand Thread Type)The structure has a special alloy inserted between the colored chromate-treated steel holder and the hard chrome-plated spherical inner ring, resulting in high rigidity and excellent wear resistance and corrosion resistance. Grease nipples can be used to lubricate the slip surface.Type Left-hand thread type JIS Class JIS Class 2 RoHS directive (corresponding to 10 substances) Correspondence
- THK Rod-end NOS T Type Left-hand ThreadAn oil-free type in which a self-lubricating synthetic resin is molded between the steel holder and the inner ring of the spherical surface. The clearance on the slip surface is minimized and accurate link motion can be obtained. It is a type with a male screw holder terminal.Type Left-hand thread type JIS Class JIS Class 2 RoHS directive (corresponding to 10 substances) Correspondence
- THK Rod-end NHS T Type Left-hand ThreadAn oil-free type in which a self-lubricating synthetic resin is molded between the steel holder and the inner ring of the spherical surface. The clearance on the slip surface is minimized and accurate link motion can be obtained.Type Left-hand thread type JIS Class JIS Class 2 RoHS directive (corresponding to 10 substances) Correspondence
- IKO (NIPPON THOMPSON) Pillow ball POSEC (with external thread, oil-free, left-hand thread)A self-aligning spherical plain bearing that can simultaneously load a large radial load and an axial load in both directions with a small capacity. The pillow ball rod end is easy to install because the main body is machined with female or male threads. It is used in control mechanisms and link ... Read MoreSpecification 1N≒0.102kgf Material Chrome plating (spherical inner ring) Material (Main Unit) Zinc chromate Type With male thread Material (Bushing) Special copper alloy Screw direction Left-hand thread Lubrication type Oil-free type
- IKO (NIPPON THOMPSON) Elbow LHSA (Right thread)A self-aligning spherical plain bearing that integrates a special zinc die-cast alloy body and a ball stud with an axial center that intersects it. Due to the constant clearance of the sliding surface, it is possible to perform rotary motion and tilt motion with low torque, and smooth force trans... Read MoreSpecification 1N≒0.102Kgf Material (Main Unit) Special zinc diecast alloy Remark Grease-filled product. Screw direction Right-handed screw
- MTR RBM-E Rod end (Mold type) Male threadType RBM-E Screws Male screw Material (Ball) Bearing steel (chrome plating) Material (Body) Carbon steel (galvanized)
- IKO (NIPPON THOMPSON) Elbow LHS (Right Thread)A self-aligning spherical plain bearing that integrates a special zinc die-cast alloy body and a ball stud with an axial center that intersects it. Due to the constant clearance of the sliding surface, it is possible to perform rotary motion and tilt motion with low torque, and smooth force trans... Read MoreSpecification 1N≒0.102Kgf Screw direction Right-handed screw
- IKO (NIPPON THOMPSON) Pillow Ball PHS□EC (With Female Thread, Lube-Free, Left-Hand Thread)A self-aligning spherical plain bearing that can simultaneously load a large radial load and an axial load in both directions with a small capacity. The pillow ball rod end is easy to install because the main body is machined with female or male threads. It is used in control mechanisms and link ... Read MoreMaterial Chrome plating (spherical inner ring) Material (Main Unit) Zinc chromate Type With female thread Material (Bushing) Special copper alloy Screw direction Left-hand thread Lubrication type Oil-free type
- IKO (NIPPON THOMPSON) L-BALL Dust Cover PRCThis dust cover is for Elball LHS and is made of special synthetic rubber with excellent oil resistance and ozone resistance, which has excellent dust resistance and prevents grease leakage.
- CCTY Bearing Japan Rod end (lubrication male thread) right-hand thread typeA spherical plain bearing that uses a spherical inner ring with the same accuracy and hardness as a steel ball for bearings, and is used for mounting the rod end of rocking motion. * M of M-6H in the dimensional drawing represents the following dimensions M (mm) M5 × 0.8, and 6H and 6g represent ... Read MoreType Right-handed screw RoHS directive (corresponding to 10 substances) Correspondence
-
- ASAHI SEIKO Join Ball PTFE Liner Internal Thread Rod End FDF Type (Stainless Steel Series)RoHS directive (corresponding to 10 substances) Correspondencefrom S$58.99Min. 2 days
- IKO (NIPPON THOMPSON) L-BALL LHS (Left-Hand Thread)A self-aligning spherical plain bearing that integrates a special zinc die-cast alloy body and a ball stud with an axial center that intersects it. Due to the constant clearance of the sliding surface, it is possible to perform rotary motion and tilt motion with low torque, and smooth force trans... Read MoreSpecification 1N≒0.102Kgf Screw direction Left-hand thread
- TRUSCO Oil-free female end rod end type, right-hand threadA non-lubricated type in which a synthetic resin with excellent self-lubricating properties is adhered to the race surface of the ball. It consists of a special copper alloy with a self-lubricating synthetic resin lace inserted into a rust-preventive S45C body and a hard chrome-plated ball. Vario... Read MoreType Right-handed screw Operating Temperature Range (℃) -30～+150from S$22.99Min. 2 days
- THK LINK Ball BL-A Type (Right-Hand Thread Type)A holder is formed at a right angle to the shank with a ball, which is a specially welded high-precision steel ball and male screw. By arranging grease pockets on the top and bottom of the spherical surface, it has good lubricity and excellent wear resistance. The weight is greatly reduced by usi... Read MoreType Right-hand thread type JIS Class JIS Class 2 Permissible Tilt Angle (°) 40 RoHS directive (corresponding to 10 substances) Correspondence
- TRUSCO Rod end oil-free male thread typeA non-lubricated type in which a synthetic resin with excellent self-lubricating properties is adhered to the race surface of the ball. It consists of a special copper alloy with a self-lubricating synthetic resin lace inserted into a rust-preventive S45C body and a hard chrome-plated ball. Vario... Read MoreOperating Temperature Range (℃) -30～+150
- CCTY Bearing Japan Rod end (female screw) right-hand thread typeA spherical plain bearing that uses a spherical inner ring with the same accuracy and hardness as a steel ball for bearings, and is used for mounting the rod end of rocking motion. * M of M-6H in the dimensional drawing represents the following dimensions M (mm) M5 × 0.8, and 6H and 6g represent ... Read MoreType Right-handed screw RoHS directive (corresponding to 10 substances) Correspondencefrom S$9.89Min. 2 days
- IMAO Rod end jointMade of resin and lightweight, it is ideal for high-speed operation. The material of the ball is a self-lubricating material. No maintenance required. It has high corrosion resistance and can be used in liquids. It is quiet and has high vibration damping.Operating Temperature Range (℃) -30～80 Color (Body) Black Color (ball) Ivory
- ASAHI SEIKO Join ball insert type female threaded rod end JAF typeRoHS directive (corresponding to 10 substances) Correspondencefrom S$26.99Min. 2 days
- IMAO Clevis jointMade of resin and lightweight, it is ideal for high-speed operation. It has high corrosion resistance and can be used in liquids. It is quiet and has high vibration damping.Operating Temperature Range (℃) -30～80 Color (Body) Black
- IKO (NIPPON THOMPSON) Elbow LHSA (Left thread)A self-aligning spherical plain bearing that integrates a special zinc die-cast alloy body and a ball stud with an axial center that intersects it. Due to the constant clearance of the sliding surface, it is possible to perform rotary motion and tilt motion with low torque, and smooth force trans... Read MoreSpecification 1N≒0.102Kgf Remark Grease-filled product. Screw direction Left-hand thread
- TRUSCO Rod end lubricated male thread type (right thread)A rod end with excellent wear resistance, corrosion resistance, and rigidity, consisting of a rust-preventive S45C body, a special copper alloy inserted into it, and a hard chrome-plated ball. Lubrication is possible from the grease nipple of the body to the sliding surface. Various transport mac... Read MoreType Right-handed screw Operating Temperature Range (℃) -50～+230from S$19.99Min. 2 days
- THK Link ball RBI type (left-hand thread type)With a series in which the shaft and holder are on the same line, a tensile compressive load can be applied and smooth rotation can be obtained.Type Left-hand thread type JIS Class JIS Class 2from S$8.89Min. 4 days
Filter by categories
