All Category

Worm Speed Reducers

View : Grid List
Filter

Items 1 - 40 of 569

Set Ascending Direction
  1. Worm reducer LMH-A
    SIGMA GIKEN Worm reducer LMH-A
    Type  Decelerator  Type of Sign  Leg mounting  Transmission type  Worm gear 
    from S$269.90
    Min. 2 days
  2. Worm reducer LMH-B
    SIGMA GIKEN Worm reducer LMH-B
    Type  Decelerator  Type of Sign  Leg mounting  Transmission type  Worm gear 
    from S$269.90
    Min. 2 days
  3. Worm reducer LML-A
    SIGMA GIKEN Worm reducer LML-A
    Type  Decelerator  Type of Sign  Leg mounting  Transmission type  Worm gear 
    from S$269.90
    Min. 2 days
  4. Small one-stage worm reducer
    Maki Shinko Small one-stage worm reducer
    Type  Decelerator  Transmission type  Worm reducer 
    from S$299.90
    Min. 2 days
  5. Worm reducer LMV-B
    SIGMA GIKEN Worm reducer LMV-B
    Type  Decelerator  Type of Sign  Leg mounting  Transmission type  Worm gear 
    Rating:
    20%
    from S$269.90
    Min. 2 days
  6. Worm reducer LML-B
    SIGMA GIKEN Worm reducer LML-B
    Type  Decelerator  Type of Sign  Leg mounting  Transmission type  Worm gear 
    from S$259.90
    Min. 2 days
  7. 2-stage worm reducer
    Maki Shinko 2-stage worm reducer
    Smooth and quiet operation due to sliding transmission compared to hypoid gears and helical gears.
    Specification  1st stage: Worm / 2nd stage: Warm  Reduction Ratio  300  Type  Wide variations of BH, KH, AH, AOH  Type of Sign  Leg mounting  Torque (Nm)  113~56600 
    from S$1,499.00
    Min. 9 days
  8. Small one-stage worm reducer
    Maki Shinko Small one-stage worm reducer
    Multipurpose IT-related, general industry equipment / equipment, medical welfare-related equipment * 50 / 60Hz combined use. * When ordering, please specify the rotation speed rpm (1800, 1500, 1200, 1000, 900, 750, 500, 250, 100). * Please note that the MA series can only perform as specified wit... Read More
    Type  Decelerator  Type of Sign  Flange mounting  Frequency (Hz)  50/60 combined use  Rotational Speed (min -1 [rpm])  1800  Shaft end key  JIS B1301-1996 (Parallel key) 
    from S$299.90
    Min. 21 days
  9. Worm reducer BH
    HASEGAWA MACHINE Worm reducer BH
    Hasegawa reducer BH series is based on single-stage worm reducer US type and DS type, and is designed as a universal type conforming to JGMA standards. By combining the main body, base, angle, motor, and speed changer, it is easy to use anywhere, and is small, lightweight, and quiet. It can withs... Read More
    Type  BH 
    from S$399.90
    Min. 26 days
  10. Worm reducer US
    HASEGAWA MACHINE Worm reducer US
    from S$489.90
    Min. 26 days
  11. Worm reducer BHL
    HASEGAWA MACHINE Worm reducer BHL
    Hasegawa reducer BH series is based on single-stage worm reducer US type and DS type, and is designed as a universal type conforming to JGMA standards. By combining the main body, base, angle, motor, and speed changer, it is easy to use anywhere, and is small, lightweight, and quiet. It can withs... Read More
    from S$119.90
    Min. 26 days
  12. One-stage worm reducer
    Maki Shinko One-stage worm reducer
    Smooth and quiet operation due to slip conduction. Space-saving design is possible because it is an orthogonal axis. Multipurpose hall, stage, IT related, general industry equipment / equipment, transportation equipment such as construction machinery, medical welfare related equipment * 50 / 60Hz... Read More
    Reduction Ratio  20  Type  Decelerator  Type of Sign  Leg mounting  Frequency (Hz)  50/60 combined use  Rotational Speed (min -1 [rpm])  1800  Input (kW)  5.84  Output Torque (Nm)  560  Shaft end key  JIS B1301-1996 (Parallel key) 
    from S$1,999.00
    Min. 5 days
  13. Worm reducer LMV-A
    SIGMA GIKEN Worm reducer LMV-A
    Type  Decelerator  Type of Sign  Leg mounting  Transmission type  Worm gear 
    from S$289.90
    Min. 2 days
  14. One-stage worm reducer WP type
    Maki Shinko One-stage worm reducer WP type
    Smooth and quiet driving due to sliding transmission compared to hypoid gears and helical gears. It has a characteristic (self-locking) that makes it difficult to reverse from the output shaft.
    Reduction Ratio  20 
    from S$1,999.00
    Min. 9 days
  15. Geneva
    HASEGAWA MACHINE Geneva
    An intermittent motion mechanism that rotates the driver continuously and periodically stops and rotates the wheel.・The cam follower fixed to the driver moves along the groove of the wheel according to the rotation of the driver, giving intermittent motion to the wheel. At the start and end poin... Read More
    Material (wheel)  S50C tempered HRC22 
    from S$859.90
    Min. 31 days
  16. Worm reducer V
    HASEGAWA MACHINE Worm reducer V
    from S$599.90
    Min. 26 days
  17. Worm reducer LMV-D
    SIGMA GIKEN Worm reducer LMV-D
    Type  Decelerator  Type of Sign  Leg mounting  Transmission type  Worm gear 
    from S$269.90
    Min. 3 days
  18. Single stage worm reducer
    Maki Shinko Single stage worm reducer
    Type  Decelerator  Transmission type  Worm reducer 
    from S$449.90
    Min. 2 days
  19. Compact and lightweight worm reducer
    HASEGAWA MACHINE Compact and lightweight worm reducer
    Because it uses engineering plastic, it is ultra-lightweight, compact and economical. Driving is efficient and very quiet. The main body consists of two symmetrical casings that are attached with four bolts to form a single body, and maintenance is free without the need to change lubricating oil.... Read More
    from S$199.90
    Min. 16 days
  20. Worm reducer BHF
    HASEGAWA MACHINE Worm reducer BHF
    Hasegawa reducer BH series is based on single-stage worm reducer US type and DS type, and is designed as a universal type conforming to JGMA standards. By combining the main body, base, angle, motor, and speed changer, it is easy to use anywhere, and is small, lightweight, and quiet. It can withs... Read More
    from S$689.90
    Min. 31 days
  21. Worm reducer BHU
    HASEGAWA MACHINE Worm reducer BHU
    Hasegawa reducer BH series is based on single-stage worm reducer US type and DS type, and is designed as a universal type conforming to JGMA standards. By combining the main body, base, angle, motor, and speed changer, it is easy to use anywhere, and is small, lightweight, and quiet. It can withs... Read More
    Type  BHU 
    from S$449.90
    Min. 26 days
  22. Worm reducer BHV
    HASEGAWA MACHINE Worm reducer BHV
    Hasegawa reducer BH series is based on single-stage worm reducer US type and DS type, and is designed as a universal type conforming to JGMA standards. By combining the main body, base, angle, motor, and speed changer, it is easy to use anywhere, and is small, lightweight, and quiet. It can withs... Read More
    Type  BHV 
    from S$599.90
    Min. 26 days
  23. Single-stage worm reducer (solid shaft) S series WP type
    Maki Shinko Single-stage worm reducer (solid shaft) S series WP type
    Smooth and quiet driving due to sliding transmission compared to hypoid gears and helical gears. It has a characteristic (self-locking) that makes it difficult to reverse from the output shaft. Space-saving design is possible. High reduction ratio in one step (10-60) Input shaft, output shaft: Al... Read More
    Reduction Ratio  20  Type  Decelerator  Type of Sign  Leg mounting  Spiral Angle  Right twist  Motor  Without motor  Torque (Nm)  47~56600  Painting  Atomic tone green (alkyd resin)  shaft direction  Right side  Shaft end key  JIS B1301-1996 (Parallel key) 
    from S$1,199.00
    Min. 9 days
  24. Single-stage worm reducer BP type
    Maki Shinko Single-stage worm reducer BP type
    Since the worm screw is always immersed in lubricating oil and the lubrication conditions are good, it is especially suitable for low-speed operation and high-load operation. The position of the output shaft is high, and it is easy to connect equipment such as pulleys and sprockets with a large r... Read More
    Reduction Ratio  15  Spiral Angle  Right twist  Shape of Shank  (Input) Solid axis, (Output) Solid axis  Motor  Without motor  Painting  Atomic tone green (alkyd resin)  Lubrication  Gear oil equivalent to ISO VG320  Shaft end key  JIS B1301-1996 (Parallel key)  Transmission type  Worm reducer 
    from S$1,399.00
    Min. 9 days
  25. mini worm
    HASEGAWA MACHINE mini worm
    Since it is an output hollow shaft type, troublesome work such as coupling assembly is unnecessary. It can be assembled easily by simply inserting the main body into the shaft. There are 4 tapped holes on both the top and bottom of the case body, so it can be mounted from any direction. It can be... Read More
    Type  unit only 
    from S$289.90
    Min. 31 days
  26. Worm reducer DS
    HASEGAWA MACHINE Worm reducer DS
    from S$489.90
    Min. 26 days
  27. Worm reducer BHH
    HASEGAWA MACHINE Worm reducer BHH
    Hasegawa reducer BH series is based on single-stage worm reducer US type and DS type, and is designed as a universal type conforming to JGMA standards. By combining the main body, base, angle, motor, and speed changer, it is easy to use anywhere, and is small, lightweight, and quiet. It can withs... Read More
    Type  BHH 
    from S$749.90
    Min. 31 days
  28. Worm reducer LMV-C
    SIGMA GIKEN Worm reducer LMV-C
    Type  Decelerator  Type of Sign  Leg mounting  Transmission type  Worm gear 
    Rating:
    60%
    from S$289.90
    Min. 3 days
  29. Worm reducer BHD
    HASEGAWA MACHINE Worm reducer BHD
    Hasegawa reducer BH series is based on single-stage worm reducer US type and DS type, and is designed as a universal type conforming to JGMA standards. By combining the main body, base, angle, motor, and speed changer, it is easy to use anywhere, and is small, lightweight, and quiet. It can withs... Read More
    Type  BHD 
    from S$449.90
    Min. 26 days
  30. Worm reducer BHDU
    HASEGAWA MACHINE Worm reducer BHDU
    Hasegawa reducer BH series is based on single-stage worm reducer US type and DS type, and is designed as a universal type conforming to JGMA standards. By combining the main body, base, angle, motor, and speed changer, it is easy to use anywhere, and is small, lightweight, and quiet. It can withs... Read More
    from S$66.99
    Min. 16 days
  31. Single-stage worm reducer (solid shaft) S Series Cap for B80
    Maki Shinko Single-stage worm reducer (solid shaft) S Series Cap for B80
    Suitable Model  No.B 80R 15  Color  White 
    Discontinued
  32. Cyclo gear motor Altax Flange mounting Single phase 100V
    Sumitomo Heavy Industries Cyclo gear motor Altax Flange mounting Single phase 100V
    (1) Shaft end diameter dimension: The dimensional tolerance is JIS B 0401-1976 "h6". (2) Shaft end key dimensions: Based on JIS B 1301-1976 parallel keys. (3) Installation part in-row diameter ... Dimensional tolerance is JIS B 0401-1976 "f8". (4) The dimensions of this dimens... Read More
    Reduction Ratio  15  Capacity (kW)  0.04  Mounting  Flange mounting 
    Discontinued
  33. Cyclo gear motor Altax Flange mounting Three-phase 200V With motor for inverter
    Sumitomo Heavy Industries Cyclo gear motor Altax Flange mounting Three-phase 200V With motor for inverter
    When the rotation speed of the AC motor exceeds 1800 rpm, the output torque is limited as shown in the figure on the right, so care must be taken with the load torque. Especially when accelerating rapidly to a rotation speed exceeding 1800 rpm immediately after starting, it is necessary to consid... Read More
    Reduction Ratio  51  Capacity (kW)  0.75  Brake  Without brake  Mounting  Flange mounting 
    Discontinued
  34. Cyclo Gear Motor Altax Flange Mounting Three Phase 200V
    Sumitomo Heavy Industries Cyclo Gear Motor Altax Flange Mounting Three Phase 200V
    (1) Shaft end diameter dimension: The dimensional tolerance is JIS B 0401-1976 "h6". (2) Shaft end key dimensions: Based on JIS B 1301-1976 parallel keys. (3) Installation part in-row diameter ... Dimensional tolerance is JIS B 0401-1976 "f8". (4) The dimensions of this dimens... Read More
    Reduction Ratio  87  Capacity (kW)  0.2  Brake  Without brake  Mounting  Flange mounting 
    Discontinued
  35. Cyclo gear motor Altax Flange mounting Three-phase 200V with brake
    Sumitomo Heavy Industries Cyclo gear motor Altax Flange mounting Three-phase 200V with brake
    (1) Shaft end diameter dimension: The dimensional tolerance is JIS B 0401-1976 "h6". (2) Shaft end key dimensions: Based on JIS B 1301-1976 parallel keys. (3) Installation part in-row diameter ... Dimensional tolerance is JIS B 0401-1976 "f8". (4) The dimensions of this dimens... Read More
    Reduction Ratio  21  Capacity (kW)  0.1  Brake  With brake  Mounting  Flange mounting 
    Discontinued
  36. Cyclo gear motor Altax Flange mounting Single phase 100V
    Sumitomo Heavy Industries Cyclo gear motor Altax Flange mounting Single phase 100V
    (1) Shaft end diameter dimension: The dimensional tolerance is JIS B 0401-1976 "h6". (2) Shaft end key dimensions: Based on JIS B 1301-1976 parallel keys. (3) Installation part in-row diameter ... Dimensional tolerance is JIS B 0401-1976 "f8". (4) The dimensions of this dimens... Read More
    Reduction Ratio  Capacity (kW)  0.06  Mounting  Flange mounting 
    Discontinued
  37. Cyclo gear motor Altax Flange mounting Single phase 100V With brake
    Sumitomo Heavy Industries Cyclo gear motor Altax Flange mounting Single phase 100V With brake
    (1) Shaft end diameter dimension: The dimensional tolerance is JIS B 0401-1976 "h6". (2) Shaft end key dimensions: Based on JIS B 1301-1976 parallel keys. (3) Installation part in-row diameter ... Dimensional tolerance is JIS B 0401-1976 "f8". (4) The dimensions of this dimens... Read More
    Reduction Ratio  29  Capacity (kW)  0.09  Brake  With brake  Mounting  Flange mounting 
    Discontinued
  38. Cyclo gear motor Altax Flange mounting Three-phase 200V with brake
    Sumitomo Heavy Industries Cyclo gear motor Altax Flange mounting Three-phase 200V with brake
    (1) Shaft end diameter dimension: The dimensional tolerance is JIS B 0401-1976 "h6". (2) Shaft end key dimensions: Based on JIS B 1301-1976 parallel keys. (3) Installation part in-row diameter ... Dimensional tolerance is JIS B 0401-1976 "f8". (4) The dimensions of this dimens... Read More
    Reduction Ratio  35  Capacity (kW)  0.04  Brake  With brake  Mounting  Flange mounting 
    Discontinued
  39. Cyclo gear motor Altax Flange mounting Single phase 100V With brake
    Sumitomo Heavy Industries Cyclo gear motor Altax Flange mounting Single phase 100V With brake
    (1) Shaft end diameter dimension: The dimensional tolerance is JIS B 0401-1976 "h6". (2) Shaft end key dimensions: Based on JIS B 1301-1976 parallel keys. (3) Installation part in-row diameter ... Dimensional tolerance is JIS B 0401-1976 "f8". (4) The dimensions of this dimens... Read More
    Reduction Ratio  13  Capacity (kW)  0.2  Brake  With brake  Mounting  Flange mounting 
    Discontinued
View : Grid List
Filter

Items 1 - 40 of 569

Set Ascending Direction