Belt Accessories
Belt peripheral devices include sonic belt tension meters and pencil tension meters. The sonic belt tension meter is a machine that can measure the tension of the belt using sound waves. A sonic belt tension meter is characterized by a wide range of sensors that process sound waves generated from the belt. Anyone can easily and accurately measure the tension of the belt. A memory function is installed inside the main unit, and hundreds of measurement results can be recorded as records.
Other Related Pages
Mitsuboshi Belting Pencil Type Tension MeterA standard spring-loaded tension measuring machine. It can be used for standard V-belt, red label V-belt, e-power series, and ultra e-power V-belt. V-belt tension measurementMaterial Steel sheet Mass (g) 65 RoHS directive (corresponding to 10 substances) Correspondence- Whale Mark (WHALE) Flat belt racingA type that can be easily attached with a single hammer. For conveyor belt connection.Material Iron
- Bando Chemical Industries Belt Tension GaugeThe tension meter makes it easy to adjust the tension of the V-belt. In addition, deflection and load can be measured at the same time.Material / Finish Brass / nickel chrome plating Diameter (Φmm) 15 (maximum) Mass (g) 96
-
- Whale Mark (WHALE) Perforated V-belt racingIt can be installed and removed without disassembling the machine. Perforated V-belt, racing for Saint Whale.Type Single
-
-
- Bando Chemical Industries BanfrescrumThere is no variation in the sinking of the belt on the pulley, and high speed (up to 60 m / s) enables smooth transmission close to that of a flat belt. It can be used with a small pulley diameter and has a large speed ratio, so the transmission system is lightweight and compact. The van fresque... Read MoreRoHS directive (corresponding to 10 substances) Correspondencefrom S$66.99Min. 47 days
- PLOT Belt tension gaugeA convenient gauge for adjusting the tension of Harley-Davidson drive belts. For harley * It is possible to measure the tension of the belt by using it to check the tension of the belt drive.Color Anodized redfrom S$32.99Min. 2 days
- GATES UNITTA ASIA Long Arm MicrophoneA type with a longer arm than a standard microphone. RoHS directive compliantOuter Diameter (Φmm) Microphone / 12.5 Measurable frequency band (Hz) 10～5000 RoHS directive (corresponding to 10 substances) Correspondencefrom S$169.90Min. 2 days
- GATES UNITTA ASIA Corded MicrophoneA cord-type microphone with a length of 1 m that can measure the belt in the back of the machine, which was difficult to measure with a standard microphone.Outer Diameter (Φmm) Microphone / 12.5 Measurable frequency band (Hz) 10～5000 RoHS directive (corresponding to 10 substances) Correspondencefrom S$129.90Min. 2 days
- IMAO Auto slide TightenerA compression spring automatically adjusts the slackness of chains and belts during operation. The stroke is large and the tension force is strong. Works reliably in any direction. Tensioning can be done very easily. Increased winding angle. Reduction of rocking, vibration and impulse.
- GATES UNITTA ASIA Horizontal arm microphoneSince there is a microphone on the side, it is possible to measure even in a place where the gap between the back of the belt and the machine is narrow. RoHS directive compliantMeasurable frequency band (Hz) 10～5000 RoHS directive (corresponding to 10 substances) Correspondencefrom S$139.90Min. 2 days
- GATES UNITTA ASIA Electromagnetic SensorSince the sensor captures changes in magnetic force instead of sound waves, it is possible to measure steel wires, steel belts, etc. Even if it is possible to measure with a normal microphone in an environment that is easily affected by noise (background noise) even with a rubber belt, it can be ... Read MoreMeasurable frequency band (Hz) 10～5000 RoHS directive (corresponding to 10 substances) Correspondencefrom S$539.90Min. 8 days
- Bando Chemical Industries Tension masterVibration can be measured directly with an accelerometer. The industry's highest level of measurement accuracy. It can be used even in a noisy environment. It can also be used as a natural vibration measuring instrument. When measuring the belt tension accurately. When measuring the belt tens... Read MoreSpecification Tension master Set Contents Accelerometer Material plastic Mass (g) 80 2018 Trusco page 1 1898from S$899.90Min. 2 days
- Bando Chemical Industries Tension master1. Since the vibration can be measured directly by the accelerometer, it can be measured even in a noisy environment. (In the sonic tension meter, the microphone also detects noise at the same time, and measurement errors are likely to occur.) 2. Accurate measurement is possible even with layouts... Read Morefrom S$999.00Min. 6 days
- Mitsuboshi Belting Sensor arm for tension meter (cord type)A sensor arm dedicated to doctor tension (non-contact belt tension gauge). * A flexible arm type sensor arm is attached to the doctor tension body. Please purchase according to the usage environment.Specification Code expression
-
-
- IMAO Auto slide TightenerThe compression spring automatically adjusts the looseness of the chain or belt during operation. The stroke is large and the tension is strong. It works reliably no matter what direction it is set. Tensioning is very easy to do. Increased winding angle. Reduction of rocking, vibration and impulse.Material (Foot Plate) SUS304 Material (Spring) SUS304WPB Material (shaft) SUS304from S$299.90Min. 2 days
- Mitsuboshi Belting Flexible arm type sensor headSuitable Model Sonic Tensiometer Doctor Tension Type IV RoHS directive (corresponding to 10 substances) Correspondencefrom S$299.90Min. 8 days
-
- Mitsuboshi Belting corded sensor headSuitable Model Sonic Tensiometer Doctor Tension Type IV RoHS directive (corresponding to 10 substances) Correspondencefrom S$139.90Min. 8 days
- GATES UNITTA ASIA Endless toolYou can easily recover from a sudden disconnection. Eliminates problems such as mechanical disassembly work and long-term line stop. Finger puncher: A tool for making finger joints. Hot press: A tool that fuses by applying a predetermined time, temperature, and pressure. No glue required. Cooling... Read Morefrom S$299.90Min. 7 days
- GATES UNITTA ASIA Sonic Belt Tension MeterEasily manage a large amount of measurement results. Equipped with a memory function inside the main unit. Stores 500 measurement results. The measurement results stored in the internal memory of the main unit can be output to a personal computer with a single touch via a USB cable. By setting th... Read MoreMass (g) 120 Power Supply Alkaline battery (single AAA x 2) Measurement Range 10Hz～5000HzDiscontinued
- TSUBAKI (Tsubakimoto Chain) Belt Tension Meter T-ACEA sonic belt tension meter that accurately measures the belt mounting tension with sound waves in a non-contact manner. Belt mounting tension management is very important for its full performance. The belt tension meter "T-ACE" is an economy type with the necessary functions refined by ... Read MoreDiscontinued
- IMAO Auto slide TightenerThe compression spring automatically adjusts the looseness of the chain or belt during operation. The stroke is large and the tension is strong. It is also possible to change the pressure by replacing the spring. It works reliably no matter what direction it is set. Tensioning is very easy to do.... Read MoreSpecification Maximum tension force (N) / 420 Material (Spring) SUP10 / YellowDiscontinued
- Mitsuboshi Belting Sonic belt tension meter Doctor tension[Belt tension can be seen at a glance] The small microphone reads the natural frequency of the belt and instantly displays the belt tension. [Abundant measurable target belts] Compatible with various belts such as timing belts, flat belts, V-belts, and V-ribbed belts. [Belt vibration frequency an... Read MoreMass (g) 240 Power Supply AA batteries x 2 Battery Life (hours) About 30 Battery AA batteries x 2 Measurement Range 10.0Hz～999HzDiscontinued
- Bando Chemical Industries Tension meterIt is possible to measure the tension of V-belts and toothed belts. The amount of deflection of the belt and the load can be measured at the same time. When measuring the belt tension accurately.Material Iron 2018 Trusco page 1 1898Discontinued
- GATES UNITTA ASIA Sonic belt tension meterAnalyze sound waves and measure belt tension without contact. The sensor captures the sound waves (natural frequencies) generated from the belt and processes them by computer. Anyone can easily and accurately measure the belt tension. RoHS directive compliantMass (g) 120 Power Supply Alkaline battery (single AAA x 2) Measurement Range 10Hz～5000HzDiscontinued
