All Category

Oilless Type Roller Chains

Oil-free type roller chains are parts that can operate without any oil supply due to the effect of special oil-impregnated bushes in the roller chain. The oil-free roller chain, which does not require lubrication for maintenance, provides a clean work environment and is a convenient item with good cost performance due to its long service life. It is used at work sites that dislike refueling such as food transportation. There are various unit standards, and it is better to select one or two rows depending on the application such as length. There are parts required for connection, such as joint links, and they can be used in combination.
View : Grid List
Filter

23 Item(s)

Set Ascending Direction
  1. Joint link for roller chain lambda
    TSUBAKI (Tsubakimoto Chain) Joint link for roller chain lambda
    Single or Double Strand  Type  Roller chain  Chain type  Lambda chain  Material (Main Unit)  Steel 
    Rating:
    100%
    from S$2.59
    Min. 2 days
  2. Roller chain lambda
    TSUBAKI (Tsubakimoto Chain) Roller chain lambda
    Refueling, which affects the life of the chain, is indispensable. However, the lambda chain has achieved a long life due to the effect of the special oil-impregnated bush even without refueling. With the renewal in 1999, the service life has been further extended compared to the conventional lamb... Read More
    Operating Temperature Range (℃)  -10~150  Single or Double Strand  Unit Length (m)  About 3  Chain type  Lambda chain  Type  Roller chain  Material (Main Unit)  Steel 
    Rating:
    60%
    from S$189.90
    Min. 2 days
  3. Offset link for roller chain lambda
    TSUBAKI (Tsubakimoto Chain) Offset link for roller chain lambda
    Single or Double Strand  Chain type  Lambda chain  Type  Roller chain  Pin Type  Split pin type  Material (Main Unit)  Steel 
    Rating:
    80%
    from S$4.59
    Min. 2 days
  4. Fit link roller chain FT35
    KANA (KATAYAMA CHAIN) Fit link roller chain FT35
    The fit link was born from an epoch-making concept in which the pitch of standard roller chains No. 25 to 80 was cut in advance for each odd-numbered link and the joint link was bundled and stocked. Therefore, when delivering it, it will be an even numbered link and can be endless.
    Single or Double Strand  Tensile Strength (kN)  10.8  Pin length L (mm)  12.8  Maximum Tensile Force (kN)  2.16  Link Inner Width (mm)  4.78  Roller Outer Diameter D (Φmm)  5.08 (Bush diameter)  Cell Spacing (mm)  9.525  Type  Roller chain  Material (Main Unit)  Steel 
    Rating:
    100%
    from S$2.59
    Min. 5 days
  5. Fit link roller chain FT25
    KANA (KATAYAMA CHAIN) Fit link roller chain FT25
    The fit link was born from an epoch-making concept in which the pitch of standard roller chains No. 25 to 80 was cut in advance for each odd-numbered link and the joint link was bundled and stocked. Therefore, when delivering it, it will be an even numbered link and can be endless.
    Maximum Tensile Force (kN)  0.64  Single or Double Strand  Link Inner Width (mm)  3.18  Roller Outer Diameter D (Φmm)  3.30 (Bush diameter)  Tensile Strength (kN)  4.4  Cell Spacing (mm)  6.35  Pin length L (mm)  8.6  Type  Roller chain  Material (Main Unit)  Steel 
    from S$2.69
    Min. 2 days
  6. Fit link roller chain FT40
    KANA (KATAYAMA CHAIN) Fit link roller chain FT40
    The fit link was born from an epoch-making concept in which the pitch of standard roller chains No. 25 to 80 was cut in advance for each odd-numbered link and the joint link was bundled and stocked. Therefore, when delivering it, it will be an even numbered link and can be endless.
    Single or Double Strand  Cell Spacing (mm)  12.7  Pin length L (mm)  17.6  Tensile Strength (kN)  18.1  Maximum Tensile Force (kN)  3.63  Roller Outer Diameter D (Φmm)  7.92  Link Inner Width (mm)  7.95  Type  Roller chain  Material (Main Unit)  Steel 
    Rating:
    100%
    from S$2.59
    Min. 2 days
  7. Joint Link
    KANA (KATAYAMA CHAIN) Joint Link
    Please use in places where refueling is disliked or where refueling is difficult on the way.
    Single or Double Strand  Unit Length (m)  Type  Roller chain  Material (Main Unit)  Steel 
    from S$3.19
    Min. 2 days
  8. Lube-Free Roller Chain
    KANA (KATAYAMA CHAIN) Lube-Free Roller Chain
    Please use in places where refueling is disliked or where refueling is difficult on the way.
    Single or Double Strand  Unit Length (m)  Type  Roller chain  Material (Main Unit)  Steel 
    from S$189.90
    Min. 2 days
  9. BS Lambda Chain (ISO606 Standard Product / B Series)
    TSUBAKI (Tsubakimoto Chain) BS Lambda Chain (ISO606 Standard Product / B Series)
    * Please order with 3 or more links or multiple links.
    Chain type  Lambda chain  Material (Main Unit)  Steel 
    from S$0.82
    Min. 4 days
  10. Offset link
    KANA (KATAYAMA CHAIN) Offset link
    Please use in places where refueling is disliked or where refueling is difficult on the way.
    Single or Double Strand  Unit Length (m)  Type  Roller chain  Pin Type  Split pin type  Material (Main Unit)  Steel 
    from S$5.59
    Min. 2 days
  11. Fit link roller chain FT50
    KANA (KATAYAMA CHAIN) Fit link roller chain FT50
    The fit link was born from an epoch-making concept in which the pitch of standard roller chains No. 25 to 80 was cut in advance for each odd-numbered link and the joint link was bundled and stocked. Therefore, when delivering it, it will be an even numbered link and can be endless.
    Single or Double Strand  Roller Outer Diameter D (Φmm)  10.16  Cell Spacing (mm)  15.875  Pin length L (mm)  21.8  Tensile Strength (kN)  29.9  Maximum Tensile Force (kN)  6.37  Link Inner Width (mm)  9.53  Type  Roller chain  Material (Main Unit)  Steel 
    from S$3.19
    Min. 2 days
  12. Lambda chain 1 row (1 link unit)
    TSUBAKI (Tsubakimoto Chain) Lambda chain 1 row (1 link unit)
    * Only odd numbers / 3 links or more can be ordered.
    Single or Double Strand  Chain type  Lambda chain  Material (Main Unit)  Steel 
    from S$0.74
    Min. 17 days
  13. Fit link roller chain FT80
    KANA (KATAYAMA CHAIN) Fit link roller chain FT80
    The fit link was born from an epoch-making concept in which the pitch of standard roller chains No. 25 to 80 was cut in advance for each odd-numbered link and the joint link was bundled and stocked. Therefore, when delivering it, it will be an even numbered link and can be endless.
    Single or Double Strand  Maximum Tensile Force (kN)  14.71  Link Inner Width (mm)  15.88  Roller Outer Diameter D (Φmm)  15.88  Cell Spacing (mm)  25.4  Pin length L (mm)  35.3  Tensile Strength (kN)  72.6  Pin Type  RP  Type  Roller chain  Material (Main Unit)  Steel 
    from S$7.49
    Min. 5 days
  14. Lambda chain
    TSUBAKI (Tsubakimoto Chain) Lambda chain
    Single or Double Strand  Link Inner Width (mm)  24.75  Link inner width W (mm)  24.75  Allowable Speed (m/min)  50  Chain type  Lambda chain  Type  Unit  Material (Main Unit)  Steel 
    from S$1,799.00
    Min. 2 days
  15. Fit link roller chain FT60
    KANA (KATAYAMA CHAIN) Fit link roller chain FT60
    The fit link was born from an epoch-making concept in which the pitch of standard roller chains No. 25 to 80 was cut in advance for each odd-numbered link and the joint link was bundled and stocked. Therefore, when delivering it, it will be an even numbered link and can be endless.
    Single or Double Strand  Roller Outer Diameter D (Φmm)  11.91  Link Inner Width (mm)  12.7  Cell Spacing (mm)  19.05  Pin length L (mm)  26.8  Tensile Strength (kN)  41.2  Maximum Tensile Force (kN)  8.83  Type  Roller chain  Material (Main Unit)  Steel 
    from S$4.19
    Min. 2 days
  16. Roller chain lambda 1 row (drum winding)
    TSUBAKI (Tsubakimoto Chain) Roller chain lambda 1 row (drum winding)
    Single or Double Strand  Chain type  Lambda chain  Type  Roller chain  Material (Main Unit)  Steel 
    from S$2,399.00
    Min. 2 days
  17. Lambda chain
    TSUBAKI (Tsubakimoto Chain) Lambda chain
    * We do not deliver to private homes (detached houses / apartments). * Depending on the delivery location, the delivery date may be postponed and additional shipping charges may be incurred.
    from S$1.89
    Min. 23 days
  18. Oilless roller chain
    KANA (KATAYAMA CHAIN) Oilless roller chain
    Single or Double Strand  Type  Roller chain  Material (Main Unit)  Steel 
    Discontinued
  19. Seal chain dedicated offset
    DID Seal chain dedicated offset
    The highest peak in the wear-resistant series with grease sealed between the pins and bushes 1. Grease is sealed between pins and bushes 2. The highest peak of wear-resistant chain that can be used anywhere 3. Wear life is 5 to 20 times longer than the standard type. There are two types. Use tigh... Read More
    Operating Temperature (℃)  -10~120 
    Discontinued
  20. Roller chain lambda 2 rows
    TSUBAKI (Tsubakimoto Chain) Roller chain lambda 2 rows
    Single or Double Strand  Type  Roller chain  Chain type  Lambda chain  Material (Main Unit)  Steel 
    Discontinued
  21. 2 link offset for seal chain
    DID 2 link offset for seal chain
    The highest peak in the wear-resistant series with grease sealed between the pins and bushes 1. Grease is sealed between pins and bushes 2. The highest peak of wear-resistant chain that can be used anywhere 3. Wear life is 5 to 20 times longer than the standard type. There are two types. Use tigh... Read More
    Operating Temperature (℃)  -10~120 
    Discontinued
  22. Joint for seal chain
    DID Joint for seal chain
    The highest peak in the wear-resistant series with grease sealed between the pins and bushes 1. Grease is sealed between pins and bushes 2. The highest peak of wear-resistant chain that can be used anywhere 3. Wear life is 5 to 20 times longer than the standard type. There are two types. Use tigh... Read More
    Operating Temperature (℃)  -10~120 
    Discontinued
  23. Seal chain
    DID Seal chain
    The highest peak in the wear-resistant series with grease sealed between the pins and bushes 1. Grease is sealed between pins and bushes 2. The highest peak of wear-resistant chain that can be used anywhere 3. Wear life is 5 to 20 times longer than the standard type. There are two types. Use tigh... Read More
    Operating Temperature (℃)  -10~120 
    Discontinued
View : Grid List
Filter

23 Item(s)

Set Ascending Direction