All Category

Bevel Gears

A bevel gear is a type of gear that originates from an umbrella with a conical shape. Sometimes called bevel gear. This is a commonly used gear when the conical surface has teeth and the two axes are not parallel but angled. Used for drive shafts of automobiles and shaft drive motorcycles. Of the bevel gears, the one with the shaft angle of 90 degrees and the same number of teeth is the miter gear. There are various products on the market, such as those made of rust-resistant stainless steel used in food machinery and those made of MC nylon that are light and usable without lubrication.
View : Grid List
Filter

Items 1 - 40 of 312

Set Ascending Direction
  1. SMC completed miter
    KHK Gears (Kohara Gear Industry) SMC completed miter
    Included Accessories  Set screw  Type  Complete Miter  Material  S45C  Reduction Ratio  Shape  BK  Number of Teeth  20  Surface Treatment  Black dyed  Pressure Angle (°)  20  Heat Treatment  Tooth surface induction hardening  Tooth Type  Gleason  Accuracy Class  JIS B 1704 Class 4  Tooth Surface Hardness  48~53HRC  Gear Surface Treatment  Cutting  Tolerance A  H7  Gear Cutting Reference Plane  Hole  Tip Cone Angle L  49 degrees 48 minutes 
    from S$49.99
    Min. 2 days
  2. DM Molded Miter 20 Miter
    KHK Gears (Kohara Gear Industry) DM Molded Miter 20 Miter
    * The product will be delivered in one piece. Please note that it is not a set of 2 pieces. * "Duracon (R)" is a registered trademark of Polyplastics Co., Ltd. in Japan and other countries.
    Type  Molded miter  Material  Duracon ®(M90-44)  Reduction Ratio  Shape  B1  Number of Teeth  20  Pressure Angle (°)  20  Tooth Type  Gleason  Accuracy Class  JIS B 1704 Class 8  Tooth Surface Hardness  110~120HRR  Gear Surface Treatment  Molding  Tip Cone Angle L  49 degrees 48 minutes  Tooth Reference Plane  Hole 
    Rating:
    100%
    from S$3.99
    Min. 2 days
  3. Bevel Gear (Miter Gear)
    AOKI SEIMITSU KOGYO Bevel Gear (Miter Gear)
    * This product is sold in units of one.
    Type  Bevel gear (miter gear)  Material  S45C  Reduction Ratio  Shape  B2  Surface Treatment  Black dyed  Pressure Angle (°)  20  Tooth Type  Normal teeth  Accuracy Class  JIS N8 class (former JIS4 class)  Gear Surface Treatment  Cutting  Shaft Hole Diameter Tolerance  JIS H7 class 
    Rating:
    93%
    from S$12.99
    Min. 2 days
  4. DB molded bevel gear tooth ratio 2
    KHK Gears (Kohara Gear Industry) DB molded bevel gear tooth ratio 2
    *The hole diameter tolerance is -0.05 to -0.30, but the center part of the hole may be slightly larger. *The product will be delivered in one piece. Please note that it is not a set of 2 pieces. * "Duracon (R)" is a registered trademark of Polyplastics Co., Ltd. in Japan and other count... Read More
    Type  Bevel gear  Material  Duracon ®(M90-44)  Reduction Ratio  Pressure Angle (°)  20  Tooth Type  Gleason  Accuracy Class  JIS B 1704 Class 8  Tooth Surface Hardness  110~120HRR  Gear Surface Treatment  Molding  Tooth Reference Plane  Hole 
    Rating:
    73%
    from S$3.79
    Min. 2 days
  5. SMA completed miter
    KHK Gears (Kohara Gear Industry) SMA completed miter
    Included Accessories  Set screw  Type  Complete Miter  Material  S45C  Reduction Ratio  Number of Teeth  20  Surface Treatment  Black dyed  Pressure Angle (°)  20  Heat Treatment  Tooth surface induction hardening  Tooth Type  Gleason  Accuracy Class  JIS B 1704 Class 4  Tooth Surface Hardness  48~53HRC  Gear Surface Treatment  Cutting  Tolerance A  H7  Gear Cutting Reference Plane  Hole  Tip Cone Angle L  49 degrees 48 minutes 
    Rating:
    100%
    from S$22.99
    Min. 2 days
  6. SB Steel Bevel Gear
    KHK Gears (Kohara Gear Industry) SB Steel Bevel Gear
    Type  Bevel gear  Material  S45C  Surface Treatment  Black dyed  Pressure Angle (°)  20  Tooth Type  Gleason  Accuracy Class  JIS B 1704 Class 3  Tooth Surface Hardness  194HB or less  Gear Surface Treatment  Cutting  Tolerance A  H7  Gear Cutting Reference Plane  Hole 
    Rating:
    100%
    from S$13.99
    Min. 2 days
  7. SM Miter 20 Miter
    KHK Gears (Kohara Gear Industry) SM Miter 20 Miter
    * Please note that we cannot perform additional machining such as hole drilling or keyway machining.
    Type  Miter  Material  S45C  Reduction Ratio  Shape  B3  Number of Teeth  20  Surface Treatment  Black dyed  Pressure Angle (°)  20  Tooth Type  Gleason  Accuracy Class  JIS B 1704 Class 3  Tooth Surface Hardness  194HB or less  Gear Surface Treatment  Cutting  Tolerance A  H7  Gear Cutting Reference Plane  Hole  Tip Cone Angle L  49 degrees 48 minutes 
    Rating:
    100%
    from S$12.99
    Min. 2 days
  8. SMB Finished Bore Miter
    KHK Gears (Kohara Gear Industry) SMB Finished Bore Miter
    Included Accessories  Set screw  Type  Complete Miter  Material  S45C  Reduction Ratio  Number of Teeth  20  Surface Treatment  Black dyed  Pressure Angle (°)  20  Heat Treatment  Tooth surface induction hardening  Tooth Type  Gleason  Accuracy Class  JIS B 1704 Class 4  Tooth Surface Hardness  48~53HRC  Gear Surface Treatment  Cutting  Tolerance A  H7  Gear Cutting Reference Plane  Hole  Tip Cone Angle L  49 degrees 48 minutes 
    from S$22.99
    Min. 2 days
  9. Bevel Gear Speed Ratio 1: 2
    AOKI SEIMITSU KOGYO Bevel Gear Speed Ratio 1: 2
    * This product is sold in units of one. When using at a speed ratio of 1: 2, it is necessary to purchase a compatible product separately.
    Type  Bevel gear  Reduction Ratio  Pressure Angle (°)  20  Tooth Type  Normal teeth  Accuracy Class  JIS N8 class (former JIS4 class)  Gear Surface Treatment  Cutting  Shaft Hole Diameter Tolerance  JIS H7 class 
    Rating:
    100%
    from S$14.99
    Min. 2 days
  10. Miter gear module 0.5 brass
    KYOUIKU GEAR MFG Miter gear module 0.5 brass
    Type  Miter gear  Material  Brass  Reduction Ratio  Module  0.5  JIS Grade 
    Rating:
    100%
    from S$14.99
    Min. 2 days
  11. Miter Gear Module 1 S45C
    KYOUIKU GEAR MFG Miter Gear Module 1 S45C
    Material  S45C  Reduction Ratio  Module 
    from S$13.99
    Min. 2 days
  12. Spiral miter gear L speed ratio 1: 1
    AOKI SEIMITSU KOGYO Spiral miter gear L speed ratio 1: 1
    * This product is sold in units of one. When using at a speed ratio of 1: 1, it is necessary to purchase a compatible product separately.
    Type  Spiral miter gear  Material  S45C  Reduction Ratio  Spiral Angle  Left  Surface Treatment  Black dyed  Pressure Angle (°)  20 
    Rating:
    100%
    from S$12.99
    Min. 2 days
  13. Miter Gear Polyacetal (Blue)
    KYOUIKU GEAR MFG Miter Gear Polyacetal (Blue)
    Material  Polyacetal  Reduction Ratio  Pressure Angle (°)  20  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$19.99
    Min. 6 days
  14. Spiral Bevel Gear Module 1 S45C
    KYOUIKU GEAR MFG Spiral Bevel Gear Module 1 S45C
    * This product is sold in units of one.
    Type  Bevel gear  Material  S45C  Module  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$14.99
    Min. 6 days
  15. Sintered miter
    KHK Gears (Kohara Gear Industry) Sintered miter
    We have realized a low price by taking advantage of the mass production effect of the sintering method. It is a small and lightweight product. Gears for power transmission.
    Material  SMF5040  2018 Trusco page  2 0127 
    from S$6.59
    Min. 2 days
  16. Bevel Gear Speed Ratio 1: 3
    AOKI SEIMITSU KOGYO Bevel Gear Speed Ratio 1: 3
    * This product is sold in units of one. When using at a speed ratio of 1: 3, it is necessary to purchase a compatible product separately.
    Type  Bevel gear  Reduction Ratio  Pressure Angle (°)  20  Tooth Type  Normal teeth  Accuracy Class  JIS N8 class (former JIS4 class)  Gear Surface Treatment  Cutting  Shaft Hole Diameter Tolerance  JIS H7 class 
    from S$16.99
    Min. 2 days
  17. PM Plastic Miter 25 Miter
    KHK Gears (Kohara Gear Industry) PM Plastic Miter 25 Miter
    Type  Plastic miter  Material  MC901  Reduction Ratio  Shape  B3  Number of Teeth  25  Pressure Angle (°)  20  Tooth Type  Gleason  Accuracy Class  JIS B 1704 Class 4  Tooth Surface Hardness  115~120HRR  Gear Surface Treatment  Cutting  Gear Cutting Reference Plane  Hole  Tip Cone Angle L  48 degrees 51 minutes 
    Rating:
    100%
    from S$19.99
    Min. 2 days
  18. Bevel Gear Ratio 1: 4
    AOKI SEIMITSU KOGYO Bevel Gear Ratio 1: 4
    * This product is sold in units of one. When using at a speed ratio of 1: 4, it is necessary to purchase a compatible product separately.
    Type  Bevel gear  Reduction Ratio  Surface Treatment  Black dyed  Pressure Angle (°)  20  Tooth Type  Normal teeth  Accuracy Class  JIS N8 class (former JIS4 class)  Gear Surface Treatment  Cutting  Shaft Hole Diameter Tolerance  JIS H7 class 
    from S$19.99
    Min. 6 days
  19. Spiral miter gear module 1 helix angle 35 ° S45C
    KYOUIKU GEAR MFG Spiral miter gear module 1 helix angle 35 ° S45C
    Type  Miter gear  Material  S45C  Reduction Ratio  Module  RoHS directive (corresponding to 10 substances)  Correspondence  Keyway (b2 x t2) (mm) 
    from S$16.99
    Min. 6 days
  20. SM Miter 25 Miter
    KHK Gears (Kohara Gear Industry) SM Miter 25 Miter
    * Please note that we cannot perform additional machining such as hole drilling or keyway machining.
    Type  Miter  Material  S45C  Reduction Ratio  Shape  B3  Number of Teeth  25  Surface Treatment  Black dyed  Pressure Angle (°)  20  Tooth Type  Gleason  Accuracy Class  JIS B 1704 Class 3  Tooth Surface Hardness  194HB or less  Gear Surface Treatment  Cutting  Tolerance A  H7  Gear Cutting Reference Plane  Hole  Tip Cone Angle L  48 degrees 51 minutes 
    from S$14.99
    Min. 2 days
  21. Miter gear module 0.5 Helix angle 35 ° S45C
    KYOUIKU GEAR MFG Miter gear module 0.5 Helix angle 35 ° S45C
    Type  Miter gear  Material  S45C  Reduction Ratio  Module  0.5  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$12.99
    Min. 6 days
  22. PM plastic miter 20 miter
    KHK Gears (Kohara Gear Industry) PM plastic miter 20 miter
    Type  Plastic miter  Material  MC901  Reduction Ratio  Shape  B3  Number of Teeth  20  Pressure Angle (°)  20  Tooth Type  Gleason  Accuracy Class  JIS B 1704 Class 4  Tooth Surface Hardness  115~120HRR  Gear Surface Treatment  Cutting  Gear Cutting Reference Plane  Hole  Tip Cone Angle L  49 degrees 48 minutes 
    from S$17.99
    Min. 2 days
  23. SMA completed miter
    KHK Gears (Kohara Gear Industry) SMA completed miter
    Included Accessories  Set screw  Type  Complete Miter  Material  S45C  Reduction Ratio  Number of Teeth  25  Surface Treatment  Black dyed  Pressure Angle (°)  20  Heat Treatment  Tooth surface induction hardening  Tooth Type  Gleason  Accuracy Class  JIS B 1704 Class 4  Tooth Surface Hardness  48~53HRC  Gear Surface Treatment  Cutting  Tolerance A  H7  Gear Cutting Reference Plane  Hole  Tip Cone Angle L  48 degrees 51 minutes 
    Rating:
    100%
    from S$26.99
    Min. 2 days
  24. SMS Spiral Miter
    KHK Gears (Kohara Gear Industry) SMS Spiral Miter
    As a popular product of spiral miter, it has a large number of modules and teeth, and has applicability.
    Type  Spiral miter  Material  S45C  Reduction Ratio  Shape  B3  Surface Treatment  Black dyed  Pressure Angle (°)  20  Heat Treatment  Tooth surface induction hardening  Tooth Type  Gleason  Helix Angle (°)  35  Accuracy Class  JIS B 1704: 1978 Class 4  Tooth Surface Hardness  50~60HRC  Gear Surface Treatment  Cutting  Gear Cutting Reference Plane  Hole 
    Rating:
    100%
    from S$22.99
    Min. 2 days
  25. Miter gear
    KYOUIKU GEAR MFG Miter gear
    Used for general industrial machinery, food machinery, medical equipment, etc. * If the mating gear is used in combination with a product other than the manufacturer, problems may occur.
    Pressure Angle (°)  20  Teeth ratio  1:1 
    from S$12.99
    Min. 3 days
  26. Spiral miter gear R speed ratio 1: 1
    AOKI SEIMITSU KOGYO Spiral miter gear R speed ratio 1: 1
    * This product is sold in units of one. When using at a speed ratio of 1: 1, it is necessary to purchase a compatible product separately.
    Type  Spiral miter gear  Material  S45C  Reduction Ratio  Shape  B2  Surface Treatment  Black dyed  Pressure Angle (°)  20  Tooth Type  Normal teeth  Helix Angle (°)  35  Accuracy Class  JIS N8 class (former JIS4 class)  Gear Surface Treatment  Cutting  Shaft Hole Diameter Tolerance  JIS H7 class 
    Rating:
    80%
    from S$13.99
    Min. 6 days
  27. SM Miter 16 Miter
    KHK Gears (Kohara Gear Industry) SM Miter 16 Miter
    Type  Miter  Material  S45C  Reduction Ratio  Shape  B2  Number of Teeth  16  Surface Treatment  Black dyed  Pressure Angle (°)  20  Tooth Type  Gleason  Accuracy Class  JIS B 1704 Class 3  Tooth Surface Hardness  194HB or less  Gear Surface Treatment  Cutting  Tolerance A  H7  Gear Cutting Reference Plane  Hole  Tip Cone Angle L  51 degrees 00 minutes 
    from S$14.99
    Min. 2 days
  28. Bevel gear module 0.5 brass
    KYOUIKU GEAR MFG Bevel gear module 0.5 brass
    Type  Bevel  Material  Brass  Reduction Ratio 
    Rating:
    80%
    from S$16.99
    Min. 4 days
  29. Bevel gear module 0.5 S45C
    KYOUIKU GEAR MFG Bevel gear module 0.5 S45C
    Material  S45C  Reduction Ratio  Module  0.5  RoHS directive (corresponding to 10 substances)  Correspondence  Tooth width b (mm)  3.2 
    Rating:
    100%
    from S$12.99
    Min. 140 days
  30. MBSA / MBSB completed bevel gear
    KHK Gears (Kohara Gear Industry) MBSA / MBSB completed bevel gear
    It is a finished product that can be used without additional processing. Has excellent strength and wear resistance.
    Type  Complete bevel gear  Material  SCM415 
    from S$67.99
    Min. 7 days
  31. Bevel gear
    KYOUIKU GEAR MFG Bevel gear
    Used for general industrial machinery, food machinery, medical equipment, etc. * If the mating gear is used in combination with a product other than the manufacturer, problems may occur.
    Pressure Angle (°)  20 
    from S$17.99
    Min. 3 days
  32. Bevel Gear Module 1 S45C
    KYOUIKU GEAR MFG Bevel Gear Module 1 S45C
    Type  Bevel  Material  S45C  JIS Grade 
    Rating:
    40%
    from S$14.99
    Min. 16 days
  33. PB plastic bevel gear
    KHK Gears (Kohara Gear Industry) PB plastic bevel gear
    It is a lightweight product that uses MC nylon as the material and can be used without lubrication.
    Type  Bevel gear  Material  MC901 
    from S$17.99
    Min. 2 days
  34. Spiral bevel gear
    KHK Gears (Kohara Gear Industry) Spiral bevel gear
    As a popular product of spiral bevel gears, we have a large number of modules and gear ratios. Gears for power transmission.
    Material  S45C  2018 Trusco page  2 0130 
    from S$29.99
    Min. 3 days
  35. Miter gear module 0.8 Helix angle 35 ° S45C
    KYOUIKU GEAR MFG Miter gear module 0.8 Helix angle 35 ° S45C
    Material  S45C  Reduction Ratio  Module  0.8  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$14.99
    Min. 2 days
  36. LM Sintered Miter
    KHK Gears (Kohara Gear Industry) LM Sintered Miter
    We have realized a low price by taking advantage of the mass production effect of the sintering method. It is a small and lightweight product.
    Type  Sintered miter  Material  SMF5040  Reduction Ratio  Shape  B1  Number of Teeth  20 
    from S$5.59
    Min. 8 days
  37. SMA Finished Bore Miter Gear
    KHK Gears (Kohara Gear Industry) SMA Finished Bore Miter Gear
    Included Accessories  Set screw  Type  Complete Miter  Material  S45C  Reduction Ratio  Shape  BK  Number of Teeth  30  Surface Treatment  Black dyed  Pressure Angle (°)  20  Heat Treatment  Tooth surface induction hardening  Tooth Type  Gleason  Accuracy Class  JIS B 1704 Class 4  Tooth Surface Hardness  48~53HRC  Gear Surface Treatment  Cutting  Tolerance A  H7  Gear Cutting Reference Plane  Hole  Tip Cone Angle L  48 degrees 12 minutes 
    from S$29.99
    Min. 2 days
  38. Bevel gear module 0.8 S45C
    KYOUIKU GEAR MFG Bevel gear module 0.8 S45C
    Material  S45C  Reduction Ratio  Module  0.8  RoHS directive (corresponding to 10 substances)  Correspondence  Tooth width b (mm)  4.5 
    from S$14.99
    Min. 6 days
  39. MMSA / MMSB completed spiral miter
    KHK Gears (Kohara Gear Industry) MMSA / MMSB completed spiral miter
    It is a finished product that can be used without additional processing. Has excellent strength and wear resistance.
    Type  Complete spiral miter  Material  SCM415  Reduction Ratio  Number of Teeth  20 
    Rating:
    20%
    from S$34.99
    Min. 2 days
  40. Bevel gear speed ratio 1: 1.5
    AOKI SEIMITSU KOGYO Bevel gear speed ratio 1: 1.5
    * This product is sold in units of one. When using at a speed ratio of 1: 1.5, it is necessary to purchase a compatible product separately.
    Type  Bevel gear  Material  S45C  Reduction Ratio  1.5  Surface Treatment  Black dyed  Pressure Angle (°)  20 
    from S$17.99
    Min. 7 days
View : Grid List
Filter

Items 1 - 40 of 312

Set Ascending Direction