All Category

Ball Screw Related

Other Related Pages

View : Grid List
Filter

Items 1 - 40 of 46

Set Ascending Direction
  1. Shaft for large lead rolled ball screw
    THK Shaft for large lead rolled ball screw
    ※※ The delivery date may change depending on the order status, so please check when ordering.
    Spiral Angle  Right direction  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$119.90
    Min. 4 days
  2. Precision ball screw (MDK type)
    THK Precision ball screw (MDK type)
    * We do not deliver to private homes (detached houses / apartments). * Depending on the delivery location, the delivery date may be postponed and additional shipping charges may be incurred.
    Number of Load Circuits (Row x Winding)  3×1 
    from S$349.90
    Min. 49 days
  3. Precision ball screw (MBF type)
    THK Precision ball screw (MBF type)
    Number of Load Circuits (Row x Winding)  1×3.7 
    from S$399.90
    Min. 49 days
  4. Ball screw support bearing
    NSK (Nippon Seiko) Ball screw support bearing
    Type  Universal combination (single unit)  Symbol of Internal Clearance Preload  H (heavy preload) 
    Rating:
    100%
    from S$99.90
    Min. 2 days
  5. Standard lead precision ball screw (shaft end / finished product)
    THK Standard lead precision ball screw (shaft end / finished product)
    High efficiency is obtained because the ball rolls between the screw shaft and the nut, and the drive torque is 1/3 or less compared to the conventional sliding screw. Therefore, it is easy not only to change rotary motion into linear motion, but also to convert linear motion into rotary motion. ... Read More
    Spiral Angle  Right direction 
    from S$389.90
    Min. 17 days
  6. Support Unit Fixed Side (Round)
    NSK (Nippon Seiko) Support Unit Fixed Side (Round)
    For the bearing on the fixed side, use an angular contact ball bearing with high rigidity and low friction torque or a thrust angular contact ball bearing with high precision and high rigidity that matches the rigidity of the ball screw. Deep groove ball bearings with shields on both sides are us... Read More
    from S$149.90
    Min. 12 days
  7. Ball screw support unit fixed side square (Φ4 to Φ20)
    THK Ball screw support unit fixed side square (Φ4 to Φ20)
    The fixed side support unit incorporates a JIS5 class angular bearing that has been preloaded. Considering the rigidity balance with the ball screw, a high rigidity and low torque angular bearing (contact angle 30 degrees, DF combination) is used. It is a compact structure that takes into conside... Read More
    from S$149.90
    Min. 3 days
  8. Standard Ball Screw
    NSK (Nippon Seiko) Standard Ball Screw
    from S$769.90
    Min. 5 days
  9. Ball screw support unit support side square (Φ6 to Φ20)
    THK Ball screw support unit support side square (Φ6 to Φ20)
    Considering the rigidity balance with the ball screw, a high rigidity and low torque angular bearing (contact angle 30 degrees, DF combination) is used. It is a compact structure that takes into consideration the space around the installation. In addition, since the bearings with preload adjustme... Read More
    from S$58.99
    Min. 3 days
  10. Ball screw support unit fixed side round shape (Φ4 to Φ30)
    THK Ball screw support unit fixed side round shape (Φ4 to Φ30)
    The fixed side support unit incorporates a JIS5 class angular bearing that has been preloaded. Considering the rigidity balance with the ball screw, a high rigidity and low torque angular bearing (contact angle 30 degrees, DF combination) is used. It is a compact structure that takes into conside... Read More
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$149.90
    Min. 4 days
  11. Support unit fixed side (square)
    NSK (Nippon Seiko) Support unit fixed side (square)
    For the bearing on the fixed side, use an angular contact ball bearing with high rigidity and low friction torque or a thrust angular contact ball bearing with high precision and high rigidity that matches the rigidity of the ball screw. Deep groove ball bearings with shields on both sides are us... Read More
    from S$149.90
    Min. 5 days
  12. Compact FA series
    NSK (Nippon Seiko) Compact FA series
    In order to meet various needs with high speed, quietness and compactness of the end deflector method, we have made it into standard stock as "Compact FA series". Achieved a 6 dB reduction equivalent to about half of the auditory sense. The nut outer diameter has been reduced by up to 3... Read More
    from S$649.90
    Min. 5 days
  13. RNFTL Type Transfer Ball Screw (Tube Type Single Flange Nut)
    NSK (Nippon Seiko) RNFTL Type Transfer Ball Screw (Tube Type Single Flange Nut)
    This is a Ct10 class precision series that pursues the ball screw function of feed drive for transport, such as orthogonal robots and single-axis actuators. It is a shaft end unprocessed product. The screw shaft and nut are sold separately and are compatible.
    Rating:
    100%
    from S$129.90
    Min. 5 days
  14. Rolled ball screw
    NSK (Nippon Seiko) Rolled ball screw
    from S$86.99
    Min. 5 days
  15. Rolled ball screw shaft
    THK Rolled ball screw shaft
    ※※ The delivery date may change depending on the order status, so please check when ordering.
    Spiral Angle  Right direction  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    70%
    from S$89.99
    Min. 4 days
  16. Flash Ground Ball Screw Support Bearing TAB
    NACHI (NACHI-FUJIKOSHI) Flash Ground Ball Screw Support Bearing TAB
    from S$65.99
    Min. 5 days
  17. Ball screw for conveyance (screw shaft)
    NSK (Nippon Seiko) Ball screw for conveyance (screw shaft)
    A series of Ct7 and Ct10 class accuracy that pursues the ball screw function of feed drive for transport, such as orthogonal robots and single-axis actuators. It is a shaft end unprocessed product. The screw shaft and nut are sold separately and are compatible.
    from S$65.99
    Min. 5 days
  18. Ball screw support unit fixed side square (Φ10 to Φ40)
    THK Ball screw support unit fixed side square (Φ10 to Φ40)
    The fixed side support unit incorporates a JIS5 class angular bearing that has been preloaded. Considering the rigidity balance with the ball screw, a high rigidity and low torque angular bearing (contact angle 30 degrees, DF combination) is used. It is a compact structure that takes into conside... Read More
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$169.90
    Min. 3 days
  19. Support unit Support side (square)
    NSK (Nippon Seiko) Support unit Support side (square)
    For the bearing on the fixed side, use an angular contact ball bearing with high rigidity and low friction torque or a thrust angular contact ball bearing with high precision and high rigidity that matches the rigidity of the ball screw. Deep groove ball bearings with shields on both sides are us... Read More
    Rating:
    100%
    from S$69.99
    Min. 5 days
  20. Support Unit (Machine For High Speed / Heavy Duty Tools)
    NSK (Nippon Seiko) Support Unit (Machine For High Speed / Heavy Duty Tools)
    from S$749.90
    Min. 5 days
  21. Ball screw support unit support side square (Φ8 to Φ40)
    THK Ball screw support unit support side square (Φ8 to Φ40)
    Considering the rigidity balance with the ball screw, a high rigidity and low torque angular bearing (contact angle 30 degrees, DF combination) is used. It is a compact structure that takes into consideration the space around the installation. In addition, since the bearings with preload adjustme... Read More
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$74.99
    Min. 4 days
  22. Support unit Fixed side round shape (flange type)
    SUNGIL Support unit Fixed side round shape (flange type)
    Preload  P0-C7 (Light preload) 
    from S$53.99
    Min. 7 days
  23. Lock nut
    NSK (Nippon Seiko) Lock nut
    from S$9.79
    Min. 17 days
  24. Ball screw support unit support side round shape (Φ6 to Φ30)
    THK Ball screw support unit support side round shape (Φ6 to Φ30)
    Considering the rigidity balance with the ball screw, a high rigidity and low torque angular bearing (contact angle 30 degrees, DF combination) is used. It is a compact structure that takes into consideration the space around the installation. In addition, since the bearings with preload adjustme... Read More
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$29.99
    Min. 4 days
  25. Support unit Support side square (block type)
    SUNGIL Support unit Support side square (block type)
    from S$23.99
    Min. 7 days
  26. Spacer
    NSK (Nippon Seiko) Spacer
    from S$9.79
    Min. 5 days
  27. Super lead screw shaft (10)
    TOYO SHAFT Super lead screw shaft (10)
    * Right-handed screw only.
    Single / Multiple Start  10  Lead Angle  42°17’07” 
    from S$139.90
    Min. 8 days
  28. RNFCL type transfer ball screw (end cap type single flange nut)
    NSK (Nippon Seiko) RNFCL type transfer ball screw (end cap type single flange nut)
    This is a Ct10 class precision series that pursues the ball screw function of feed drive for transport, such as orthogonal robots and single-axis actuators. It is a shaft end unprocessed product. The screw shaft and nut are sold separately and are compatible.
    from S$289.90
    Min. 5 days
  29. Support unit Fixed side square (block type)
    SUNGIL Support unit Fixed side square (block type)
    Preload  P0-C7 (Light preload) 
    from S$53.99
    Min. 7 days
  30. Support unit BUK series
    Kuroda Precision Industries Support unit BUK series
    The paired angular contact ball bearings use a DF combination with a contact angle of 30°, class P5, and an appropriate amount of grease is filled in the bearings to ensure stable high accuracy. *Please check the catalog for details.
    from S$95.99
    Min. 23 days
  31. Support kit for transfer ball screw
    NSK (Nippon Seiko) Support kit for transfer ball screw
    from S$119.90
    Min. 5 days
  32. Ball screw for conveyance (screw shaft)
    NSK (Nippon Seiko) Ball screw for conveyance (screw shaft)
    This is a Ct10 class precision series that pursues the ball screw function of feed drive for transport, such as orthogonal robots and single-axis actuators. It is a shaft end unprocessed product. The screw shaft and nut are sold separately and are compatible.
    from S$149.90
    Min. 5 days
  33. Rolled ball screw USS type (high precision, clean)
    NSK (Nippon Seiko) Rolled ball screw USS type (high precision, clean)
    Clean applications such as semiconductor manufacturing equipment, liquid crystal manufacturing equipment / inspection equipment, etc.
    from S$749.90
    Min. 5 days
  34. Compact FA series
    NSK (Nippon Seiko) Compact FA series
    In order to meet various needs with high speed, quietness and compactness of the end deflector method, we have made it into standard stock as "Compact FA series". Achieved a 6 dB reduction equivalent to about half of the auditory sense. The nut outer diameter has been reduced by up to 3... Read More
    from S$979.90
    Min. 5 days
  35. Support unit
    MORIMOTO SEIMITSU SHAFT Support unit
    It also comes with the necessary parts for installation, so it can be installed easily.
    from S$55.99
    Min. 5 days
  36. Rolled ball screw FSS type (for conveyance)
    NSK (Nippon Seiko) Rolled ball screw FSS type (for conveyance)
    Clean applications such as semiconductor manufacturing equipment, liquid crystal manufacturing equipment / inspection equipment, etc.
    from S$449.90
    Min. 5 days
  37. Precision ball screw (BNF type)
    THK Precision ball screw (BNF type)
    * We do not deliver to private homes (detached houses / apartments). * Depending on the delivery location, the delivery date may be postponed and additional shipping charges may be incurred.
    from S$649.90
    Min. 34 days
  38. Support unit BUM series
    Kuroda Precision Industries Support unit BUM series
    The paired angular contact ball bearings use a DF combination with a contact angle of 30°, class P5, and an appropriate amount of grease is filled in the bearings to ensure stable high accuracy. *Please check the catalog for details.
    Material  (Bearing housing) Structural steel 
    from S$99.90
    Min. 23 days
View : Grid List
Filter

Items 1 - 40 of 46

Set Ascending Direction