All Category

Oilless Bushings

As its name suggests, an oilless bush is a bearing component that can be used for a long time without oil or lubricating oil. It is characterized by being processed so that the coefficient of friction of the surface becomes small, and this does not require replenishment of lubricating oil. Oilless bushes are used for bearings in parts where it is difficult to replenish lubricant or where frequent lubrication is required. Maintenance-free operation can be enabled. Of course there are many sizes, and the materials are roughly divided into metal and plastic. You can choose the most suitable one in relation to the parts to be combined.
View : Grid List
Filter

Items 1 - 40 of 131

Set Ascending Direction
  1. Oiles # 80 Bush
    OILES Oiles # 80 Bush
    OILES # 80 is a non-lubricated bearing in which lubricating oil and a special filler are uniformly dispersed and contained in the resin in polyacetal. It can be used without lubrication and has excellent load resistance and wear resistance. It has a low coefficient of friction and excellent speed... Read More
    Type  # 80 Bush  Operating Temperature Range (℃)  -40~+80  Allowable Maximum Speed V (m/s [m/min])  0.85[51]  Specific Gravity  1.39  Melting Point (℃)  165  Allowable Maximum Surface Pressure P (N/mm2 [kgf/cm2])  17.5[179]  Allowable PV Value (N/mm 2 m/s) [kgf/cm2 m/min]  2.45[1500]  Flexural Modulus (N/mm2[kgf /cm2])  2650[27000]  Tensile Strength (N/mm2 51.0  Izod Impact Strength (J/m[kgfcm/cm])  58.8 [6.00] (with notch)  Elongation at Break (%)  60  Bending Strength (N/mm2 76.5  Linear Expansion Coefficient (×10-5/℃)  8~13  Hardness  HRM72  Lubrication System  No lubrication  Material  Oil-impregnated polyacetal resin 
    Rating:
    95%
    from S$0.59
    Min. 2 days
  2. iglidur(R) G Sleeve
    Igus (R) iglidur(R) G Sleeve
    Shape 
    Rating:
    71%
    from S$0.93
    Min. 2 days
  3. Luuron Bear Fight R-ARF
    NTN Luuron Bear Fight R-ARF
    Dimension R (mm)  0.2 or less 
    Rating:
    100%
    from S$1.29
    Min. 2 days
  4. Drymet LF (t0.5)
    OILES Drymet LF (t0.5)
    OILES Drymet LF is a non-lubricated bearing consisting of a filler-filled tetrafurinated ethylene resin layer, a bronze sintered layer, and a back metal layer. It can be used without refueling, and it is thin, lightweight and compact. It shows a stable low coefficient of friction under high load ... Read More
    Allowable Maximum Surface Pressure P (N/mm2 [kgf/cm2])  49.0[500]  Allowable Maximum Speed V (m/s [m/min])  0.65[39]  Allowable PV Value (N/mm 2 m/s) [kgf/cm2 m/min]  3.60[2200]  Length Tolerance (mm)  ±0.3  Outer Diameter Tolerance (mm)  +0.025~+0.055  Dimension T2 (mm)  0.48(±0.05)  Lubrication System  No lubrication  Operating Temperature Range (℃)  -200~+280  Wall Thickness T1 (mm)  0.48(±0.02) 
    Rating:
    96%
    from S$0.86
    Min. 2 days
  5. Iglidur® J flange
    Igus (R) Iglidur® J flange
    Shape 
    Rating:
    80%
    from S$1.89
    Min. 2 days
  6. Oiles Glitron SE Bush
    OILES Oiles Glitron SE Bush
    OILES GLIGHTRON SE makes OILES GLIGHTRON S conductive while maintaining sliding characteristics. Bearings with a dispersion of special additives. It can be used completely without lubrication, and since there is no big difference between the coefficient of static friction and the coefficient of d... Read More
    Operating Temperature Range (℃)  -60~+200 
    Rating:
    65%
    from S$1.49
    Min. 2 days
  7. Oiles slide shifter stopper
    OILES Oiles slide shifter stopper
    from S$38.99
    Min. 7 days
  8. Oiles # 80 Flange Bush
    OILES Oiles # 80 Flange Bush
    OILES # 80 is a non-lubricated bearing in which polyacetal resin is specially treated at the manufacturing stage and lubricating oil and special filler are uniformly dispersed and contained in the resin. It can be used without refueling. Has excellent load resistance and abrasion resistance. It h... Read More
    Type  # 80 Flange bush  Operating Temperature Range (℃)  -40~+80  Allowable Maximum Surface Pressure P (N/mm2 [kgf/cm2])  17.5[179]  Material  Oil-impregnated polyacetal resin  Allowable Maximum Speed V (m/s [m/min])  0.85[51]  Lubrication System  No lubrication  Allowable PV Value (N/mm 2 m/s) [kgf/cm2 m/min]  2.45[1500] 
    Rating:
    93%
    from S$0.40
    Min. 2 days
  9. Oiles 70B Drymet Bush
    OILES Oiles 70B Drymet Bush
    OILES Drymet is an oil-free bearing consisting of three layers: the surface layer of OILES # 80, the sintered bronze layer, and the steel back metal. It can be used without refueling. It has a low abrasion coefficient and excellent load resistance. It exhibits excellent wear resistance even in pl... Read More
    Operating Temperature Range (℃)  -40~+120  Allowable Maximum Surface Pressure P (N/mm2 [kgf/cm2])  24.5 [approximately 2.49] 
    Rating:
    89%
    from S$1.09
    Min. 2 days
  10. Drymet LF Bush
    OILES Drymet LF Bush
    It can be used without refueling, and it is thin, lightweight and compact. It shows a stable low coefficient of friction under high load and low speed conditions, and has excellent wear resistance. When lubricating oil is used together, it can be used with a high PV value even in the medium and h... Read More
    Allowable PV Value (N/mm 2 m/s) [kgf/cm2 m/min]  3.60[2200]  Length Tolerance (mm)  0~-0.3  Allowable Maximum Speed V (m/s [m/min])  0.65[39]  Allowable Maximum Surface Pressure P (N/mm2 [kgf/cm2])  49.0[500]  Operating Temperature Range (℃)  -200~+280  Lubrication System  No lubrication 
    Rating:
    92%
    from S$0.78
    Min. 2 days
  11. DDK05 Bushing
    Daido Metal DDK05 Bushing
    Environmentally friendly Pb-free bearings that do not use lead at all. The bearing surface has an extremely small coefficient of static friction as well as a coefficient of dynamic friction, so it slides smoothly without lubrication. General industrial equipment, hydraulic equipment, household el... Read More
    Operating Temperature Range (℃)  -200~280  Friction Coefficient (μ)  0.03~0.2  Length Tolerance (mm)  0~-0.3  Thermal Conductivity (W/mk)  42  Foreign Object Tolerance  Withstand Pressure (MPa)  When compressed: 304 
    Rating:
    97%
    from S$1.39
    Min. 2 days
  12. Iglidur® G flange
    Igus (R) Iglidur® G flange
    Shape 
    Rating:
    85%
    from S$0.99
    Min. 2 days
  13. Drymet LF Flange Bushing
    OILES Drymet LF Flange Bushing
    It can be used without refueling, and it is thin, lightweight and compact. It shows a stable low coefficient of friction under high load and low speed conditions, and has excellent wear resistance. When lubricating oil is used together, it can be used with a high PV value even in the medium and h... Read More
    Allowable Maximum Speed V (m/s [m/min])  0.65[39]  Allowable PV Value (N/mm 2 m/s) [kgf/cm2 m/min]  3.60[2200]  Length Tolerance (mm)  0~-0.3  Allowable Maximum Surface Pressure P (N/mm2 [kgf/cm2])  49.0[500]  Operating Temperature Range (℃)  -200~+280  Type  Flange type  Lubrication System  No lubrication 
    Rating:
    95%
    from S$1.39
    Min. 2 days
  14. DDK05 Bush with Bush
    Daido Metal DDK05 Bush with Bush
    Environmentally friendly Pb-free bearings that do not use lead at all. The bearing surface has an extremely small coefficient of static friction as well as a coefficient of dynamic friction, so it slides smoothly without lubrication. General industrial equipment, hydraulic equipment, household el... Read More
    Operating Temperature Range (℃)  -200~280  Friction Coefficient (μ)  0.03~0.2  Thermal Conductivity (W/mk)  42  Foreign Object Tolerance  Withstand Pressure (MPa)  When compressed: 304 
    Rating:
    95%
    from S$2.59
    Min. 2 days
  15. Glitron F Flange Bush
    OILES Glitron F Flange Bush
    OILES Gliteron F is an oil-free bearing that uses tetrafluorinated ethylene resin as a base material and adds wear-resistant filler and solid lubricant. It can be used completely without refueling. Does not cause stick slip during driving. It has excellent wear resistance even under high speed co... Read More
    Operating Temperature Range (℃)  -200~+200 
    Rating:
    92%
    from S$3.69
    Min. 2 days
  16. Oiles # 300 Bush
    OILES Oiles # 300 Bush
    OILES # 300 is a bearing that is made porous by actively utilizing the growth phenomenon of cast iron and impregnated with lubricating oil. Compared to gunmetal bearings, the number of refueling can be significantly reduced. It has good oil film retention and excellent wear resistance and seizure... Read More
    Rating:
    100%
    from S$4.89
    Min. 2 days
  17. # 500SP Bush
    OILES # 500SP Bush
    Oiles # 500SP1 is a high-load oil-free bearing based on a high-strength brass alloy made by advanced casting technology and embedded with a solid lubricant. It can be used in combination with various solid lubricants depending on the conditions of use. It can be used without refueling. Demonstrat... Read More
    Rating:
    100%
    from S$12.99
    Min. 2 days
  18. Dive best DBS02 bush with DBS-F
    Daido Metal Dive best DBS02 bush with DBS-F
    It is an environmentally friendly lead-free material and is a "completely lubricated bearing" that does not require any lubricant. It is a material consisting of polyacetal resin (POM), lipophilic fiber, special filler and oil. It can be formed into complicated shapes by injection moldi... Read More
    Length Tolerance (mm)  0/-0.3 
    Rating:
    80%
    from S$0.57
    Min. 2 days
  19. Die Best DBX01 Bush DXB
    Daido Metal Die Best DBX01 Bush DXB
    A "pre-lubricated bearing" that is an environmentally friendly lead-free material and uses a lubricant such as grease when assembling. A bearing material with high load capacity that can be expected to have a long life by regular lubrication. A copper-tin alloy is porously sintered on a... Read More
    Length Tolerance (mm)  0/-0.4 
    Rating:
    90%
    from S$2.39
    Min. 2 days
  20. Oiles Glitron SE Flange Bush
    OILES Oiles Glitron SE Flange Bush
    Operating Temperature Range (℃)  -60~+200 
    Rating:
    77%
    from S$1.29
    Min. 2 days
  21. Dive best DBB01 Bush DBB
    Daido Metal Dive best DBB01 Bush DBB
    It is an environmentally friendly lead-free material and is a "completely lubricated bearing" that does not require any lubricant. A copper-tin alloy is porously sintered on a steel backing metal and lined with polyacetal resin (POM), lipophilic fibers, special fillers and oil. It has g... Read More
    Length Tolerance (mm)  0/-0.3 
    Rating:
    100%
    from S$1.49
    Min. 2 days
  22. Oiles Toughmet
    OILES Oiles Toughmet
    OILES Toughmet is a high-temperature, high-load bearing consisting of two layers, a copper-based sintered alloy layer and steel back metal, in which a special solid lubricant is uniformly and finely dispersed. Has excellent load resistance and heat resistance. It demonstrates excellent bearing pe... Read More
    Allowable Maximum Surface Pressure P (N/mm2 [kgf/cm2])  24.5 [approximately 2.49]  Operating Temperature Range (℃)  -40~+350 
    Rating:
    93%
    from S$2.59
    Min. 2 days
  23. Oiles Cermet M
    OILES Oiles Cermet M
    Oiles Cermet M is a self-lubricating bearing in which a solid lubricant mainly composed of molybdenum disulfide is uniformly dispersed in the structure of a sintered alloy. It can be used without lubrication, but when used in combination with lubricating oil, it exhibits even better performance. ... Read More
    Type  Cermet M 
    Rating:
    87%
    from S$6.19
    Min. 2 days
  24. Die Slide Bush HA
    Daido Metal Die Slide Bush HA
    A high-load, oil-free bearing with a copper alloy base and a plug manufactured with a carefully selected solid lubricant. It is maintenance-free and does not require refueling. Extremely excellent wear resistance. It exhibits excellent wear resistance in places where oil film formation is difficu... Read More
    Length Tolerance (mm)  -0.1/-0.3  Material (Foot Plate)  High strength brass 
    Rating:
    100%
    from S$12.99
    Min. 2 days
  25. Iglidur® X flange
    Igus (R) Iglidur® X flange
    Shape 
    Rating:
    20%
    from S$2.39
    Min. 2 days
  26. Iglidur J Sleeve
    Igus (R) Iglidur J Sleeve
    Versatile and long life, high wear resistance on (almost) all axes and very low coefficient of friction. Excellent wear resistance for various shaft materials Low coefficient of friction and high vibration damping even when non-lubricated
    Shape 
    Rating:
    80%
    from S$1.59
    Min. 5 days
  27. Dive best DBS02 Bush DBS
    Daido Metal Dive best DBS02 Bush DBS
    It is an environmentally friendly lead-free material and is a "completely lubricated bearing" that does not require any lubricant. It is a material consisting of polyacetal resin (POM), lipophilic fiber, special filler and oil. It can be formed into complicated shapes by injection moldi... Read More
    Length Tolerance (mm)  0/-0.3 
    Rating:
    65%
    from S$0.63
    Min. 2 days
  28. # 500SP Flange bush
    OILES # 500SP Flange bush
    Oiles # 500SP1 is a high-load oil-free bearing based on a high-strength brass alloy made by advanced casting technology and embedded with a solid lubricant. It can be used in combination with various solid lubricants depending on the conditions of use. It can be used without refueling. Demonstrat... Read More
    Rating:
    80%
    from S$15.99
    Min. 7 days
  29. Iglidur® X sleeve
    Igus (R) Iglidur® X sleeve
    Shape  Material  Iglidur® 
    Rating:
    60%
    from S$2.69
    Min. 5 days
  30. Glitron F Bush
    OILES Glitron F Bush
    It can be used completely without refueling. Does not cause stick slip during driving. It has excellent wear resistance even under high speed conditions and maintains a low coefficient of friction. It has excellent chemical resistance and complies with the Food Sanitation Law. It is a lead-free t... Read More
    Rating:
    100%
    from S$1.39
    Min. 2 days
  31. Oiles # 300 Bush (Thin type)
    OILES Oiles # 300 Bush (Thin type)
    Rating:
    87%
    from S$11.99
    Min. 6 days
  32. Rulon Bear Fight R-BRF
    NTN Rulon Bear Fight R-BRF
    Rating:
    80%
    from S$0.70
    Min. 2 days
  33. Die Slide Bushing with SAF SAF
    Daido Metal Die Slide Bushing with SAF SAF
    A high-load, oil-free bearing with a copper alloy base and a plug manufactured with a carefully selected solid lubricant. It is maintenance-free and does not require refueling. Extremely excellent wear resistance. It exhibits excellent wear resistance in places where oil film formation is difficu... Read More
    Length Tolerance (mm)  -0.1/-0.3 
    from S$15.99
    Min. 2 days
  34. Luuron Bear Fight R-ML
    NTN Luuron Bear Fight R-ML
    Type  ML type 
    from S$0.90
    Min. 6 days
  35. Thermalloy D type DM series
    Daido Metal Thermalloy D type DM series
    A metal-based oil-free bearing in which a solid lubricant (graphite) is finely and uniformly dispersed in a bronze-based metal. D type is a general grade of Thermalloy that can be used under a wide range of usage conditions. It has a low coefficient of friction and wear resistance under no lubric... Read More
    Length Tolerance (mm)  0/-0.3 
    from S$19.99
    Min. 2 days
  36. Oiles # 2000 Bush
    OILES Oiles # 2000 Bush
    Operating Temperature Range (℃)  -40~+120 
    Rating:
    80%
    from S$15.99
    Min. 16 days
  37. # 500SP SL-4 bush
    OILES # 500SP SL-4 bush
    Allowable Maximum Speed V (m/s [m/min])  No lubrication: 0.25 [1.5]  Allowable PV Value (N/mm 2 m/s) [kgf/cm2 m/min]  No lubrication: 1.65 [1010]  Operating Temperature Range (℃)  No lubrication: -40 to +80 
    from S$28.99
    Min. 7 days
  38. Thermalloy D type standard material
    Daido Metal Thermalloy D type standard material
    A metal-based oil-free bearing in which a solid lubricant (graphite) is finely and uniformly dispersed in a bronze-based metal. D type is a general grade of Thermalloy that can be used under a wide range of usage conditions. It has a low coefficient of friction and wear resistance under no lubric... Read More
    Rating:
    100%
    from S$12.99
    Min. 3 days
  39. TMDB Oiles Toughmet
    OILES TMDB Oiles Toughmet
    Operating Temperature Range (℃)  -40~+150 
    from S$4.89
    Min. 7 days
  40. # 500SP Thrust Bush
    OILES # 500SP Thrust Bush
    Oiles # 500SP1 is a high-load oil-free bearing based on a high-strength brass alloy made by advanced casting technology and embedded with a solid lubricant. It can be used in combination with various solid lubricants depending on the conditions of use. It can be used without refueling. Demonstrat... Read More
    from S$38.99
    Min. 7 days
View : Grid List
Filter

Items 1 - 40 of 131

Set Ascending Direction