Oilless Materials
Other Related Pages
- OILES Oiles # 80 BushOILES # 80 is a non-lubricated bearing in which lubricating oil and a special filler are uniformly dispersed and contained in the resin in polyacetal. It can be used without lubrication and has excellent load resistance and wear resistance. It has a low coefficient of friction and excellent speed... Read MoreType # 80 Bush Material Oil-impregnated polyacetal resin Operating Temperature Range (℃) -40~+80 Hardness HRM72 Elongation at Break (%) 60 Lubrication System No lubrication Specific Gravity 1.39 Melting Point (℃) 165 Bending Strength (N/mm2) 76.5 Allowable PV Value (N/mm 2 m/s) [kgf/cm2 m/min] 2.45[1500] Allowable Maximum Surface Pressure P (N/mm2 [kgf/cm2]) 17.5[179] Linear Expansion Coefficient (×10-5/℃) 8~13 Tensile Strength (N/mm2) 51.0 Flexural Modulus (N/mm2[kgf /cm2]) 2650[27000] Izod Impact Strength (J/m[kgfcm/cm]) 58.8 [6.00] (with notch)
- OILES Drymet LF (t0.5)OILES Drymet LF is a non-lubricated bearing consisting of a filler-filled tetrafurinated ethylene resin layer, a bronze sintered layer, and a back metal layer. It can be used without refueling, and it is thin, lightweight and compact. It shows a stable low coefficient of friction under high load ... Read MoreOperating Temperature Range (℃) -200~+280 Lubrication System No lubrication Allowable PV Value (N/mm 2 m/s) [kgf/cm2 m/min] 3.60[2200] Allowable Maximum Surface Pressure P (N/mm2 [kgf/cm2]) 49.0[500]
- OILES Oiles Glitron SE BushOILES GLIGHTRON SE makes OILES GLIGHTRON S conductive while maintaining sliding characteristics. Bearings with a dispersion of special additives. It can be used completely without lubrication, and since there is no big difference between the coefficient of static friction and the coefficient of d... Read MoreOperating Temperature Range (℃) -60~+200
- OILES Oiles # 80 Flange BushOILES # 80 is a non-lubricated bearing in which polyacetal resin is specially treated at the manufacturing stage and lubricating oil and special filler are uniformly dispersed and contained in the resin. It can be used without refueling. Has excellent load resistance and abrasion resistance. It h... Read MoreType # 80 Flange bush Material Oil-impregnated polyacetal resin Operating Temperature Range (℃) -40~+80 Lubrication System No lubrication Allowable PV Value (N/mm 2 m/s) [kgf/cm2 m/min] 2.45[1500] Allowable Maximum Surface Pressure P (N/mm2 [kgf/cm2]) 17.5[179]
- OILES Oiles 70B Drymet BushOILES Drymet is an oil-free bearing consisting of three layers: the surface layer of OILES # 80, the sintered bronze layer, and the steel back metal. It can be used without refueling. It has a low abrasion coefficient and excellent load resistance. It exhibits excellent wear resistance even in pl... Read MoreOperating Temperature Range (℃) -40~+120 Allowable Maximum Surface Pressure P (N/mm2 [kgf/cm2]) 24.5 [approximately 2.49]
- OILES Drymet LF BushIt can be used without refueling, and it is thin, lightweight and compact. It shows a stable low coefficient of friction under high load and low speed conditions, and has excellent wear resistance. When lubricating oil is used together, it can be used with a high PV value even in the medium and h... Read MoreOperating Temperature Range (℃) -200~+280 Lubrication System No lubrication Allowable PV Value (N/mm 2 m/s) [kgf/cm2 m/min] 3.60[2200] Allowable Maximum Surface Pressure P (N/mm2 [kgf/cm2]) 49.0[500]
- Daido Metal DDK05 BushingEnvironmentally friendly Pb-free bearings that do not use lead at all. The bearing surface has an extremely small coefficient of static friction as well as a coefficient of dynamic friction, so it slides smoothly without lubrication. General industrial equipment, hydraulic equipment, household el... Read MoreOperating Temperature Range (℃) -200~280 Withstand Pressure (MPa) When compressed: 304 Thermal Conductivity (W/mk) 42 Friction Coefficient (μ) 0.03~0.2 Foreign Object Tolerance S
- OILES Drymet LF Flange BushingIt can be used without refueling, and it is thin, lightweight and compact. It shows a stable low coefficient of friction under high load and low speed conditions, and has excellent wear resistance. When lubricating oil is used together, it can be used with a high PV value even in the medium and h... Read MoreType Flange type Operating Temperature Range (℃) -200~+280 Lubrication System No lubrication Allowable PV Value (N/mm 2 m/s) [kgf/cm2 m/min] 3.60[2200] Allowable Maximum Surface Pressure P (N/mm2 [kgf/cm2]) 49.0[500]
- Daido Metal DDK05 Bush with BushEnvironmentally friendly Pb-free bearings that do not use lead at all. The bearing surface has an extremely small coefficient of static friction as well as a coefficient of dynamic friction, so it slides smoothly without lubrication. General industrial equipment, hydraulic equipment, household el... Read MoreOperating Temperature Range (℃) -200~280 Withstand Pressure (MPa) When compressed: 304 Thermal Conductivity (W/mk) 42 Friction Coefficient (μ) 0.03~0.2 Foreign Object Tolerance S
- OILES Glitron F Flange BushOILES Gliteron F is an oil-free bearing that uses tetrafluorinated ethylene resin as a base material and adds wear-resistant filler and solid lubricant. It can be used completely without refueling. Does not cause stick slip during driving. It has excellent wear resistance even under high speed co... Read MoreOperating Temperature Range (℃) -200~+200
- OILES Oiles # 300 BushOILES # 300 is a bearing that is made porous by actively utilizing the growth phenomenon of cast iron and impregnated with lubricating oil. Compared to gunmetal bearings, the number of refueling can be significantly reduced. It has good oil film retention and excellent wear resistance and seizure... Read More
- OILES # 500SP BushOiles # 500SP1 is a high-load oil-free bearing based on a high-strength brass alloy made by advanced casting technology and embedded with a solid lubricant. It can be used in combination with various solid lubricants depending on the conditions of use. It can be used without refueling. Demonstrat... Read More
- Daido Metal Dive best DBS02 bush with DBS-FIt is an environmentally friendly lead-free material and is a "completely lubricated bearing" that does not require any lubricant. It is a material consisting of polyacetal resin (POM), lipophilic fiber, special filler and oil. It can be formed into complicated shapes by injection moldi... Read More
- Daido Metal Die Best DBX01 Bush DXBA "pre-lubricated bearing" that is an environmentally friendly lead-free material and uses a lubricant such as grease when assembling. A bearing material with high load capacity that can be expected to have a long life by regular lubrication. A copper-tin alloy is porously sintered on a... Read More
- OILES Drymet LF WasherOILES Drymet LF is a non-lubricated bearing consisting of a filler-filled tetrafurinated ethylene resin layer, a bronze sintered layer, and a back metal layer. It can be used without refueling, and it is thin, lightweight and compact. It shows a stable low coefficient of friction under high load ... Read MoreOperating Temperature Range (℃) -200~+280 Lubrication System No lubrication Allowable PV Value (N/mm 2 m/s) [kgf/cm2 m/min] 3.60[2200] Allowable Maximum Surface Pressure P (N/mm2 [kgf/cm2]) 49.0[500] Inner diameter tolerance 0~+0.25
- OILES Oiles Glitron SE Flange BushOperating Temperature Range (℃) -60~+200
- Daido Metal Dive best DBB01 Bush DBBIt is an environmentally friendly lead-free material and is a "completely lubricated bearing" that does not require any lubricant. A copper-tin alloy is porously sintered on a steel backing metal and lined with polyacetal resin (POM), lipophilic fibers, special fillers and oil. It has g... Read More
- OILES Oiles ToughmetOILES Toughmet is a high-temperature, high-load bearing consisting of two layers, a copper-based sintered alloy layer and steel back metal, in which a special solid lubricant is uniformly and finely dispersed. Has excellent load resistance and heat resistance. It demonstrates excellent bearing pe... Read MoreOperating Temperature Range (℃) -40~+350 Allowable Maximum Surface Pressure P (N/mm2 [kgf/cm2]) 24.5 [approximately 2.49]
- OILES Oiles Cermet MOiles Cermet M is a self-lubricating bearing in which a solid lubricant mainly composed of molybdenum disulfide is uniformly dispersed in the structure of a sintered alloy. It can be used without lubrication, but when used in combination with lubricating oil, it exhibits even better performance. ... Read MoreType Cermet M
- Daido Metal Die Slide Bush HAA high-load, oil-free bearing with a copper alloy base and a plug manufactured with a carefully selected solid lubricant. It is maintenance-free and does not require refueling. Extremely excellent wear resistance. It exhibits excellent wear resistance in places where oil film formation is difficu... Read MoreMaterial (Foot Plate) High strength brass
- OILES Oiles # 80 washerIt can be used without lubrication and has excellent load resistance and wear resistance. It has a low coefficient of friction and excellent speed characteristics. Prevents stick slip and creaking noise. When the surface roughness of the mating material is rough When foreign matter is predicted t... Read MoreMaterial Oil-impregnated polyacetal Operating Temperature Range (℃) -40~+80 Hardness HRM72 Elongation at Break (%) 60 Lubrication System No lubrication Specific Gravity 1.39 Melting Point (℃) 165 Bending Strength (N/mm2) 76.5 Allowable PV Value (N/mm 2 m/s) [kgf/cm2 m/min] 2.45[1500] Allowable Maximum Surface Pressure P (N/mm2 [kgf/cm2]) 17.5[179] Linear Expansion Coefficient (×10-5/℃) 8~13 Tensile Strength (N/mm2) 51.0 Flexural Modulus (N/mm2[kgf /cm2]) 2650[27000] Izod Impact Strength (J/m[kgfcm/cm]) 58.8 [6.00] (with notch)
- Daido Metal DDK05 Thrust WasherEnvironmentally friendly Pb-free bearings that do not use lead at all. The bearing surface has an extremely small coefficient of static friction as well as a coefficient of dynamic friction, so it slides smoothly without lubrication. General industrial equipment, hydraulic equipment, household el... Read MoreOperating Temperature Range (℃) -200~280 Withstand Pressure (MPa) When compressed: 304 Thermal Conductivity (W/mk) 42 Friction Coefficient (μ) 0.03~0.2 Foreign Object Tolerance S
- igus Iglidur J SleeveVersatile and long life, high wear resistance on (almost) all axes and very low coefficient of friction. Excellent wear resistance for various shaft materials Low coefficient of friction and high vibration damping even when non-lubricatedShape S
- OILES Drymet ST washer (70W)OILES Drymet is an oil-free bearing consisting of three layers: the surface layer of OILES # 80, the sintered bronze layer, and the steel back metal. It can be used without refueling. It has a low abrasion coefficient and excellent load resistance. It exhibits excellent wear resistance even in pl... Read MoreOperating Temperature Range (℃) -40~+120 Allowable Maximum Surface Pressure P (N/mm2 [kgf/cm2]) 24.5 [approximately 2.49]
- Daido Metal Dive best DBS02 Bush DBSIt is an environmentally friendly lead-free material and is a "completely lubricated bearing" that does not require any lubricant. It is a material consisting of polyacetal resin (POM), lipophilic fiber, special filler and oil. It can be formed into complicated shapes by injection moldi... Read More
- OILES # 500SP Flange bushOiles # 500SP1 is a high-load oil-free bearing based on a high-strength brass alloy made by advanced casting technology and embedded with a solid lubricant. It can be used in combination with various solid lubricants depending on the conditions of use. It can be used without refueling. Demonstrat... Read More
- OILES # 500SP Thrust washerOiles # 500SP1 is a high-load oil-free bearing based on a high-strength brass alloy made by advanced casting technology and embedded with a solid lubricant. It can be used in combination with various solid lubricants depending on the conditions of use. It can be used without refueling. Demonstrat... Read More
- OILES Glitron F BushIt can be used completely without refueling. Does not cause stick slip during driving. It has excellent wear resistance even under high speed conditions and maintains a low coefficient of friction. It has excellent chemical resistance and complies with the Food Sanitation Law. It is a lead-free t... Read More
- OILES Oiles # 80 Round BarOILES # 80 is a non-lubricated bearing in which polyacetal resin is specially treated at the manufacturing stage and lubricating oil and special filler are uniformly dispersed and contained in the resin, and there are various grades. It can be used without refueling. Has excellent load resistance... Read MoreOperating Temperature Range (℃) -40~+80 Hardness HRM72 Elongation at Break (%) 60 Lubrication System No lubrication Specific Gravity 1.39 Melting Point (℃) 165 Bending Strength (N/mm2) 76.5 Allowable PV Value (N/mm 2 m/s) [kgf/cm2 m/min] 2.45[1500] Allowable Maximum Surface Pressure P (N/mm2 [kgf/cm2]) 17.5[179] Linear Expansion Coefficient (×10-5/℃) 8~13 Flexural Modulus (N/mm2[kgf /cm2]) 2650[27000] Izod Impact Strength (J/m[kgfcm/cm]) 58.8 [6.00] (with notch)from S$8.99Min. 2 days
- Daido Metal Die vest DBB01 Thrust washer DBB-WIt is an environmentally friendly lead-free material and is a "completely lubricated bearing" that does not require any lubricant. A copper-tin alloy is porously sintered on a steel backing metal and lined with polyacetal resin (POM), lipophilic fibers, special fillers and oil. It has g... Read More
- Daido Metal Die Slide Bushing with SAF SAFA high-load, oil-free bearing with a copper alloy base and a plug manufactured with a carefully selected solid lubricant. It is maintenance-free and does not require refueling. Extremely excellent wear resistance. It exhibits excellent wear resistance in places where oil film formation is difficu... Read Morefrom S$14.99Min. 2 days
Filter by categories