Track Lighting Rails & Parts
A lighting rail is a lighting component that is installed on the ceiling and has a high degree of freedom. Although it is a lighting technique often found in cafe spaces and general stores, it is recommended for those who want to realize lighting plans that match the characteristics of the space by adopting it in private houses. You can choose from a wide range of types, from professional direct lighting rails to those that can be easily installed. The combination with peripheral parts such as rail plugs and suspension tools will create a more elaborate space.
Other Related Pages
Panasonic 100V duct connection parts feed-in capIt is used when drawing power from the terminal of the 100V duct.Dimension (mm) 130×33×19- Toshiba Lighting & Technology end capUsed at the end of the writing rail. Power cannot be pulled in.Polarity None
- Toshiba Lighting & Technology Feed-in capIt is used when drawing power from the end of the writing rail. The power supply terminal is exclusively for Φ1.6mm and Φ2.0mm copper single wires. (The grounding electrode terminal is a winding connection)Rated Voltage (V) 125 Rated Current (A) 15 Polarity None Specification With ground terminal, no feed
- Toshiba Lighting & Technology Writing rail (for direct attachment)While maintaining its light weight and ease of construction, it replaces the hue and surface finish that match the space. * For mounting joiners, cut the rail at a position 50 mm or more away from the mounting hole.Rated Voltage (V) 125 Rated Current (A) 15 Material Aluminum
- Panasonic Reeler outlet (for 2)Extend the outlet from the wiring duct to your hand. * Not with ground. * Plugs cannot be attached to the tapping screw specification position directly attached to the main body.Tensile Strength N (kgf) 50(5) Color White Specification 2P15A125V
- Panasonic Retaining Outlet Plug (with Ground)Mass (kg) 0.04 Trusco Part No. 818-5353 Color Cream gray Specification Grounding 2P15A125V retainer.
- Panasonic Coiled Cord 2-Outlet Plug for Facto Line 20When you want to take down the single-phase 100V outlet power supply from the fact line body. (Maximum about 1.8m from the main body) For fact line 20Overall Length (mm) 800～1800 Rating Ground 2P15A125V Color Plug: White, Outlet: Ceramic whitefrom S$179.90Min. 2 days
- Toshiba Lighting & Technology Lighting rail with grounding electrode (for direct mounting)While maintaining its light weight and ease of construction, it replaces the hue and surface finish that match the space. * For mounting joiners, cut the rail at a position 50 mm or more away from the mounting hole.Rated Voltage (V) 125 Rated Current (A) 15 Material Aluminum
- Panasonic Retaining outlet plugIt is a retaining outlet plug for the lower 2P circuit. (For 100V only) Common to fact lines 100 and 60 * Fact line 30 cannot be used because the grounding method is different.Applicable Standard (PS)E Mass (kg) 0.07 Specification 2P15A125V retainer Trusco Part No. 818-5434 JIS Standard JIS C8366from S$44.99Min. 2 days
- Ubon DIN rail end capIt is a safety cover for the cut part of the DIN rail.Material Soft vinyl chloride resinfrom S$26.99Min. 2 days
- Panasonic Retaining outlet plugAn outlet plug with a retaining outlet.Mass (kg) 0.06 Rated Voltage (V) 125 Rated Current (A) 15 Width (mm) 27 Height (mm) 33.5 Length (mm) 48 Color White
- Toshiba Lighting & Technology Type I joinerUsed for straight line connection of writing rails. Power can be pulled in.Rated Voltage (V) 125 Rated Current (A) 15 Polarity Included Specification With ground pole terminalfrom S$42.99Min. 2 days
- Toshiba Lighting & Technology Mini joinerUsed for straight line connection between lighting rails. Power cannot be pulled in.Rated Voltage (V) 125 Rated Current (A) 15 Polarity Includedfrom S$12.99Min. 2 days
- Panasonic Terminal Plug AIt is a terminal plug for the upper 3P circuit. Common to fact lines 100 and 60Color Cream grayfrom S$159.90Min. 2 days
- KOIZUMI Cap for slide outletIt is used to close the terminal of the slide outlet.Height (mm) 17 Width (mm) 23×33 Material (Main Unit) plastic
-
- Panasonic Retaining Outlet PlugIt is used to take out a single-phase 100V outlet power supply with a 15A or 20A branch circuit. There are L type that is taken out from the upper conductor and S type that is taken out from the lower stage. For fact line 30 only * Cannot be used for fact lines 100 and 60.Applicable Standard (PS)E Mass (kg) 0.05 Specification 2P15A125V retainer Color Cream grayfrom S$44.99Min. 2 days
- Toshiba Lighting & Technology L-shaped jointIt is used when connecting the writing rail to the L shape. Power can be pulled in.Rated Voltage (V) 125 Rated Current (A) 15 Polarity Included Specification With ground pole terminalfrom S$42.99Min. 2 days
- Panasonic Retaining Outlet PlugSingle-phase 100V outlet Used to take out the power supply.Mass (kg) 0.04 Specification 2P15A125V Trusco Part No. 818-5352 Color Cream gray
- Panasonic Terminal Plug for Facto Line 30It is used to take out a power power supply or a single-phase power supply. There are 2P type, 3P type and 4P type. There are two types of 2P type: L type, which is taken out from the upper part of the conductor, and S type, which is taken out from the lower part. For fact line 30 only * Cannot b... Read MoreApplicable Standard (PS)E Mass (kg) 0.08 Color Cream gray Rating With 15A300V ・ E
-
- Panasonic Reeler outlet plug fact line 100/60With the outlet plug for the lower 2P circuit, you can lower the outlet to your hand (up to about 1.8 m from the duct). (For 100V only) Common to fact lines 100 and 60 * Fact line 30 cannot be used because the grounding method is different. * When rewinding the reeler part, slowly raise the outle... Read MoreOverall Length (mm) About 800-1800 Rating Ground 2P15A125Vfrom S$189.90Min. 2 days
- Panasonic Terminal plug BIt is a terminal plug for the lower 2P circuit. Common to fact lines 100 and 60 * Fact line 30 cannot be used because the grounding method is different.Applicable Standard (PS)E Mass (kg) 0.08 Trusco Part No. 818-5433 Color Cream gray JIS Standard JIS C8366 Specification With 2P15A300V / Efrom S$45.99Min. 2 days
-
- Panasonic Facto Line 20 Track Lighting RailFact line 20 is a duct for small-scale branching. One circuit of single-phase power supply can be taken out. Conforms to JIS-C-8366 Ideal as a power source for task lights and outlets. You can also attach the luminaire using the luminaire plug. * Number of tapping screws: 2, included.Color Cream gray Specification With 2P20A125V ・ Efrom S$47.99Min. 2 days
- Panasonic Fact line 20 Retaining outlet plug (with ground) Grounding 2P15A125V retainingSingle-phase 100V outlet Used to take out the power supply.Mass (kg) 0.04 Color Whitefrom S$45.99Min. 2 days
- Panasonic Hanging hookIt is used to hang a display, POP, etc. from a wiring duct.Suspended load N (kgf) Up to 50 (5)from S$5.29Min. 2 days
- Panasonic Reeler outlet plug for Factline 30A single-phase 100V outlet power supply can be lowered to hand (up to about 1.8m from the duct) with a 15A or 20A branch circuit. There are L type that is taken out from the upper conductor and S type that is taken out from the lower stage. For fact line 30 only * Cannot be used for fact lines 10... Read MoreMass (kg) 0.73 Overall Length (mm) About 800-1800 Applicable Standard (PS)E Color (Plug) Cream gray (Outlet) Off-whitefrom S$189.90Min. 2 days
- Toshiba Lighting & Technology Writing rail coverUse this when you want to cover the opening of the writing rail. Can be cut.Length (m) 1from S$7.59Min. 3 days
-
- Panasonic Hanging hookIt is used to hang work standards and process charts from fact line 20. * The hanging load should be 49N or less.Mass (kg) 0.01 Trusco Part No. 818-5362 Color Cream grayfrom S$3.99Min. 2 days
-
- Toshiba Lighting & Technology T-joiner (left)It is used when connecting the writing rail to the T shape. Opposing Ts are used in (left) (right) pairs. Power can be pulled in.Rated Voltage (V) 125 Rated Current (A) 15 Polarity Included Type Left Specification With ground pole terminalfrom S$45.99Min. 2 days
- Panasonic Terminal plugWith breaker * Compatible electric wires: Vinyl cabtyre cable (VCT), rubber cabtyre cable (1CT, 2CT, 2PNCT) * When inserting the plug into the fact line body, turn off the breaker.from S$269.90Min. 2 days
- ELPA (Asahi Electric) Mini joinerFor writing bars, for direct attachment, used for connecting lighting bars to each otherDimensions (H x W x D) (mm) 200×60×20 Mass (g) 78 Rating 125V 15A
- Toshiba Lighting & Technology T-joiner (right)It is used when connecting the writing rail to the T shape. Opposing Ts are used in (left) (right) pairs. Power can be pulled in.Rated Voltage (V) 125 Rated Current (A) 15 Polarity Included Type Right Specification With ground pole terminalfrom S$57.99Min. 2 days
- Panasonic Terminal plug with earth leakage breakerThere are two types for the upper 3P circuit according to sensitivity current and capacity. Common to fact lines 100 and 60Mass (kg) 0.94 Chip Breaker Built-in BKW-50S type Color Cream grayfrom S$579.90Min. 2 days
- NITTO KOGYO L type rail (for FS □ (D) ARC / FL / FK / CRB-TA)* Mount rails (RD66-F, -J) are required when installing on the FK series. * Please note that the customer will be responsible for any in-house shipping charges for the delivery of this product.Mountable mass (kg) 60 RoHS directive (corresponding to 10 substances) Correspondence Material Iron t2.3from S$38.99Min. 2 days
- Kameda Denki Rail socketAs long as you have a duct rail, you can freely lay out LED straight pipes with rail sockets. In combination with the spotlight, you can write your product display more effectively! By rotating the straight tube to make indirect lighting, you can make your living space more attractive! (LED is so... Read MoreRated Voltage (V) AC100 Safety Standard PSE compliant Type S (for one light)from S$67.99Min. 2 days
- Panasonic Terminal plug (with ground)Conforms to JIS-C-8366 * Terminal screw: M3.5, ground terminal screw: M3.5from S$42.99Min. 2 days
