Earthing (Grounding)
Grounding is also known as grounding by connecting the electrical circuit of electrical equipment to the ground. By doing this, communication devices can operate stably, static electricity can be prevented, and electrical devices can be used safely. A typical example of use for security purposes is grounding performed on household appliances such as microwave ovens. Home appliances may cause accidents such as breakdowns and fires when they are leaked, but if they are grounded, these accidents can be prevented beforehand. And the parts for grounding are called grounding materials.
NICHIDO DENKO Round earth rodHighly reliable earth rod. Recommended for electric shock prevention, damage prevention of electrical equipment, and fire prevention. It has sufficient strength and can be driven firmly even in hard soil. It is resistant to corrosion and maintains a stable ground resistance value. There is suffic... Read More- NICHIDO DENKO S-shaped grounding rodHighly reliable earth rod. Recommended for electric shock prevention, damage prevention of electrical equipment, and fire prevention. It has sufficient strength and can be driven firmly even in hard soil. It is resistant to corrosion and maintains a stable ground resistance value. There is suffic... Read MoreSurface Treatment Copper plating Installation Method Alone
-
- MARUSHIN DENGYO Ground rod 7mm × 300mm IV1.6 × 3000mmMaterial Copper plating Standard D class
- MARUSHIN DENGYO Earth rod W type 300mmMaterial Copper plating Standard D class
- Panasonic Ground BarSince the earth bar is a thin copper plate, it can be easily cut, drilled, and bent. * Bend the earth bar where it bends at a right angle.
-
- MARUSHIN DENGYO Grounding rod 10Ф × 1000mm single typeMaterial Copper plating Standard Class B
- MARUSHIN DENGYO Ground rod 7 mm x 300 mm single typeMaterial Copper plating Standard D class
- NICHIDO DENKO Plated Earth BarHighly reliable earth rod. Recommended for electric shock prevention, damage prevention of electrical equipment, and fire prevention. It has sufficient strength and can be driven firmly even in hard soil. It is resistant to corrosion and maintains a stable ground resistance value. There is suffic... Read More
- MARUSHIN DENGYO Ground rod 10Φ × 500mm single typeMaterial Copper plating Standard D class
- MARUSHIN DENGYO Ground rod 7mm × 500mm single typeMaterial Copper plating Standard D class
- Nippon Paper Industries Ground resistance reduction material (Athlon R)It has an excellent grounding resistance reduction effect and brings about a reduction in installation construction costs. It is very easy to use and does not require a plastic container. Has outstanding low resistance and durability. Does not corrode the ground electrode.Appearance Gray white powder
- MARUSHIN DENGYO Ground rod 14Ф × 1500 Single typeMaterial Copper plating Standard Class A
- MARUSHIN DENGYO Ground rod 14Ф × 1500 articulatedMaterial Copper plating Standard Class A
- NICHIDO DENKO Lead terminal for plated ground bar* The lead terminal for the plated ground rod cannot be used for the round ground rod.from S$6.79Min. 2 days
-
- NICHIDO DENKO Round ground lead terminal* The lead terminal cannot be used alone.
-
- MARUSHIN DENGYO Earthing rod 10 mm x 1000 mm, connected typeMaterial Copper plating Standard Class B
- MARUSHIN DENGYO Ground rod 14Ф × 1200 single typeMaterial Copper plating Standard Class A
- NICHIDO DENKO Round earth rodIt has sufficient strength to drive into the ground. Construction method: alone * Use the following lead terminals for the round ground rod (for connection method).from S$7.89Min. 2 days
- MARUSHIN DENGYO Grounding rod 10mm × 1500mm articulatedMaterial Copper plating Standard Class Bfrom S$29.99Min. 2 days
- Daito Kogyo Grounding resistance reduction material (Magic Earth)It is a product mainly composed of cement and carbon fiber (carbon fiber material), and is a ground resistance reducing agent with excellent chemical, mechanical, and electrical stability. Compared to existing chemical-based reducing agents, it has good conductivity regardless of the presence or ... Read MoreElectrical Resistance Value 0.1Ωm Appearance Grayish white cement mixed powder
-
- NICHIDO DENKO Cap-type lead terminalLead terminal for reusing the disconnected ground rod. You can easily connect the ground wire to the disconnected ground rod. Since it is not necessary to re-drive the ground rod, effective use of materials and shortening of the construction period can be achieved.from S$16.99Min. 2 days
- Osaka Lightning Rod (OHK) Ground pole signboard Vertical type Ministry of Land, Infrastructure, Transport and TourismMaterial Brassfrom S$38.99Min. 3 days
- MARUSHIN DENGYO Ground rod 14Φ × 1200 connection typeMaterial Copper plating Standard Class Afrom S$36.99Min. 2 days
- Nippon Paper Industries Ground resistance reduction material (Athlon RS)The pozzolan reaction forms a high-strength, dense cured product. Therefore, it has an excellent effect of reducing ground resistance, and this effect lasts for a long time. Does not corrode the ground electrode. It does not pollute the soil and does not burden the environment. It is easy to inst... Read MoreAppearance Gray powderfrom S$169.90Min. 2 days
- Osaka Lightning Rod (OHK) Grounding pole marking board verticalMaterial Stainless steelfrom S$46.99Min. 2 days
- NICHIDO DENKO Round ground lead terminalKanto specifications * The lead terminal cannot be used alone.from S$11.99Min. 4 days
- ESCO [For EA710C-1] Replacement grounding rodSpecification EA710C-1 replacement ground rod x 2from S$46.99Min. 3 days
- OHM ELECTRIC S type grounding rod with lead wireIncreased surface area by S-shaped processing. Suppresses the ground resistance value. With a connection terminal with lead wire, it is easy to install. The lead wire uses IV 1.6 mm. Lightweight and excellent in workability.Material Copper plating Mass (g) About 170 Standard D classfrom S$14.99Min. 6 days
- NICHIDO DENKO Lead terminalIt has sufficient strength to drive into the ground. Various sizes are available.Mass (g) 308 Type For Φ16 Lead Wire 38mm2×500mmfrom S$33.99Min. 7 days
- NICHIDO DENKO Short type ground bar B-8 bottomCan be safely installed without the need for a stepladder Can be installed by one personMass (g) 1040 Installation Method Linkingfrom S$339.90Min. 4 days
-
- Kawamura Electric Grounding pole Grinder SUENo need for a dedicated buried hole! No excavation work due to the grounding electrode. Since the Guru Linder is wrapped around the bottom of the utility pole and buried as it is, excavation and backfilling work only for the grounding electrode is not required. * Cannot be used for lightning rod ... Read Morefrom S$769.90Min. 18 days
- AIWA METALS T knock connector whiteFurniture can be assembled with a single screwdriver.As ONE Part Number 64-5082-77from S$7.89Min. 9 days
- Osaka Dengu (ODK) Connector for high voltage underline connectionIt is used to connect high-voltage overhead power lines and high-voltage pull-down power lines.Maximum Tightening Torque (Nm) 19.6 insulated wire for high voltage reduction PDC 2.6mmfrom S$159.90Min. 7 days
- MARUSHIN DENGYO Ground rod 10Φ × 1500mm single typeMaterial Copper plating Standard Class B
![[For EA710C-1] Replacement grounding rod](https://jp.images-monotaro.com/Monotaro3/pi/middle/mono44102836-190802-02.jpg)
Filter by categories
