All Category

Magnetic Welding Squares

A welding magnet is a welding product used to hold and fix the material to be assembled or welded. The material is made of steel, aluminum, iron, etc. and has a strong magnet. Since the material to be welded can be temporarily fixed or held at 45 ° or 90 °, both hands can be used freely. Items used in construction sites where welding work is performed, such as steel construction work that assembles steel frames and processes steel sheets. You can choose according to the application, such as those that are fixed at 45 ° or 90 °, those that can be set freely, and those that have an on / off switch that can be easily mounted and removed.
View : Grid List
Filter

Items 1 - 40 of 109

Set Ascending Direction
  1. Magnewelder for welding
    TRUSCO Magnewelder for welding
    Suitable for stable holding by combining joints when welding iron plates, round pipes, and iron balls. For temporary holding and temporary assembly work during welding work.
    Dimension (mm)  102×162×16  Attracting Force (N)  147  Trusco Part No.  232-7074  Holding angle (°)  45、90  Mass (g)  560  Specification  Ferrite magnet  Material  SS400 
    Rating:
    100%
    from S$35.99
    Min. 2 days
  2. Welding Magnet
    Shinwa Rules Welding Magnet
    Convenient shape of 45 ° and 90 °. Adsorbs with a strong magnetic force. Anisotropic magnet For temporary fixing of welding work
    Material  Iron・ABS resin 
    Rating:
    87%
    from S$25.99
    Min. 2 days
  3. Welding Magnet Ground Clamp
    Magswitch Welding Magnet Ground Clamp
    By adopting a heat dissipation fin shape, heating is prevented and the suction force of the magnet is protected. There is no need to attach a tab plate during welding. Just set it on the work surface and turn on the switch to easily ground it.
    Rating:
    92%
    from S$109.90
    Min. 2 days
  4. Welding magnet
    TRUSCO Welding magnet
    A welding magnet that can hold angles at 30 °, 60 °, and 90 °. Comes with a hole that can be easily removed with a screwdriver when removing. For temporary attachment and temporary assembly of welding and assembly work.
    Material  Magnet: Neodymium magnet, Body: Steel  2018 Trusco page  7 0328 
    from S$21.99
    Min. 2 days
  5. Welding magnet
    TRUSCO Welding magnet
    It is a welding magnet that supports a large number of holding angles while being a convenient size. For temporary attachment and temporary assembly of welding and assembly work.
    Holding angle (°)  30、60、45、90  Material (Main Unit)  Steel 
    Rating:
    90%
    from S$24.99
    Min. 2 days
  6. Magnet Hexagon Holder (with Switch)
    TRUSCO Magnet Hexagon Holder (with Switch)
    With ON / OFF switch. Easy to install or remove in position. The angle of use can be 45 °, 90 °, and 135 °. With a groove, it is stable even for round objects. Welding, assembly, parts processing, etc.
    Rating:
    80%
    from S$129.90
    Min. 2 days
  7. Hex bolt magnet holder (neodymium magnet)
    TRUSCO Hex bolt magnet holder (neodymium magnet)
    A neodymium magnet is built into the head, and even though it is small, it exerts a powerful magnet and attracts it. It is possible to use the existing tap holes or install from the front direction. Easy to install and suitable for tight spaces. For mounting on products and jigs and for suction p... Read More
    Material  (Magnet) Neodymium magnet  Maximum Operating Temperature (℃)  80  Surface Treatment  Electroless nickel plating  Material (Case)  Iron (SUM, no quenching) 
    Rating:
    100%
    from S$17.99
    Min. 2 days
  8. Mag Square
    Magswitch Mag Square
    Since it has a strong suction force on the bottom and sides, various fixing methods are possible. Suitable for fixing and positioning the work. A jig can be attached to the screw hole and used as a magnet base for the sensor holding base of scientific instruments.
    Rating:
    50%
    from S$129.90
    Min. 2 days
  9. Welding magnet with auxiliary plate
    TRUSCO Welding magnet with auxiliary plate
    Welding magnet with auxiliary plate. The "third magnet" makes it easier to perform face-to-face welding. For temporary attachment and temporary assembly of welding and assembly work.
    Holding angle (°)  30、60、45、90  Material (Main Unit)  Steel 
    Rating:
    20%
    from S$38.99
    Min. 2 days
  10. Magneweler for welding
    SK (Niigata Seiki) Magneweler for welding
    Work efficiency is improved by using both hands For temporary holding of welding work, assembly work, temporary fixing, temporary assembly when assembling steel products, etc.
    from S$26.99
    Min. 2 days
  11. Welding magnet V pad
    TRUSCO Welding magnet V pad
    Despite its mini size, it holds the workpiece securely with a strong magnetic force, and by adjusting the angle, it can handle an extremely diverse welding scene. For temporary attachment and temporary assembly of welding and assembly work.
    Attracting Force (N)  80  Material (Main Unit)  Steel 
    from S$47.99
    Min. 2 days
  12. Mag Jig
    Magswitch Mag Jig
    A small and powerful commercial magnet. Also for hanging price display boards and POP panels at stores. Although it is small and lightweight, it exerts a strong adsorption force and holds the object strongly.
    Rating:
    80%
    from S$37.99
    Min. 2 days
  13. Mini angle
    Magswitch Mini angle
    One tool can handle a wide range of angles, which is useful for temporary welding work. Ideal for holding the angle of steel plates.
    Mass (kg)  0.2  Dimension b (mm)  32  Dimension a (mm)  54  Dimension c (mm)  60  Holding Power  Up to 40kg 
    Rating:
    20%
    from S$66.99
    Min. 2 days
  14. Magnewelder for welding
    TRUSCO Magnewelder for welding
    Suitable for stable holding by combining joints when welding iron plates, round pipes, and iron balls. For temporary holding and temporary assembly work during welding work.
    Attracting Force (N)  147  Trusco Part No.  232-7066  Holding angle (°)  45、90  Mass (g)  460  Dimension (mm)  95×111×16  Specification  Ferrite magnet  Material  SS400 
    from S$35.99
    Min. 2 days
  15. The first
    Hata Seisakujyo The first
    Rating:
    40%
    from S$569.90
    Min. 2 days
  16. Magnewelder for welding
    TRUSCO Magnewelder for welding
    With ON / OFF switches on both ends, it is convenient because the magnet can be turned ON / OFF on two suction surfaces. When welding iron plates and iron balls, the joints are combined to maintain stability. Used for temporary attachment and temporary assembly in welding and assembly work. For t... Read More
    Dimension (mm)  195×195×47  Mass (kg)  2.75  Mass (g)  2750  Trusco Part No.  284-8911  Attracting Force (N)  660  Holding angle (°)  90 With ON-OFF function  Material  Steel, aluminum 
    from S$639.90
    Min. 2 days
  17. 300A grounded mini multi-angle
    Magswitch 300A grounded mini multi-angle
    Supports a wide range of angles with one tool, and the 300A grounded mini multi-angle can hold the angle and ground at the same time. Ideal for holding the angle of steel plates. Useful for temporary welding work.
    Mass (kg)  0.4  Dimension b (mm)  42  Dimension a (mm)  86  Dimension c (mm)  91  Holding Power  Up to 67 kg 
    from S$109.90
    Min. 2 days
  18. Magnewelder for welding with off lever
    TRUSCO Magnewelder for welding with off lever
    Suitable for stable holding by combining joints when welding iron plates, round pipes, and iron balls. It can be easily removed by the off lever. For temporary holding and temporary assembly work during welding work.
    Trusco Part No.  232-7112  Dimension (mm)  305×305×39  Mass (kg)  4.9  Mass (g)  4900  Holding angle (°)  90 With off lever  Attracting Force (N)  980  Specification  Ferrite magnet  Material  SS400 
    Rating:
    100%
    from S$329.90
    Min. 2 days
  19. Magnewelder standard type for welding
    TRUSCO Magnewelder standard type for welding
    Suitable for stable holding by combining joints when welding iron plates, round pipes, and iron balls. Standard 90 ° fixed holding type. For temporary holding and temporary assembly work during welding work.
    Mass (kg)  2.1  Mass (g)  2100  Dimension (mm)  230×230×20  Trusco Part No.  232-7104  Attracting Force (N)  588  Holding angle (°)  90  Specification  Ferrite magnet  Material  SS400 
    from S$159.90
    Min. 2 days
  20. Welding magnet V pad long
    TRUSCO Welding magnet V pad long
    Material  Magnet: Neodymium magnet, Body: Steel  Width (mm)  163~238  Attracting Force (N)  80  Mass (kg)  0.6  Height (mm)  50  Trusco Part No.  115-1168  Length (mm)  50 
    from S$65.99
    Min. 2 days
  21. Magnewelder for welding fixed type
    TRUSCO Magnewelder for welding fixed type
    Suitable for stable holding by combining joints when welding iron plates, round pipes, and iron balls. Wide and firm fixing is possible. For temporary holding and temporary assembly work during welding work.
    Mass (kg)  1.5  Dimension (mm)  145×145×36  Mass (g)  1500  Trusco Part No.  232-7091  Attracting Force (N)  245  Holding angle (°)  90  Specification  Ferrite magnet  Material  SS400 
    Rating:
    100%
    from S$139.90
    Min. 2 days
  22. Mag mount
    Magswitch Mag mount
    Ideal as a holding base for sensors, etc., and as a base for welding rails. A lever is attached to the side of the main body, and a jig device can be attached to the upper part of the main body.
    from S$179.90
    Min. 6 days
  23. Temporary first clamp
    Hata Seisakujyo Temporary first clamp
    from S$94.99
    Min. 5 days
  24. Hand lifter 60M
    Magswitch Hand lifter 60M
    You can also use it by attaching the attached screws and fixing the handle at a right angle. Suitable for transporting small steel plates and steel materials that are heavy enough to be held by hand. * When using for transportation, consider a safety factor of at least 4: 1 for the maximum holdin... Read More
    Mass (kg)  0.6  Dimension b (mm)  134  Dimension a (mm)  140  Dimension c (mm)  60  Holding Power  Up to 106 kg 
    from S$299.90
    Min. 2 days
  25. Welding magnet Mag tab
    TRUSCO Welding magnet Mag tab
    The strong magnetic force holds the workpiece securely and can be used in a wide variety of welding scenes. For temporary attachment and temporary assembly of welding and assembly work. * TMTBL is a set containing two symmetrical TMTBS.
    Dimensions, Width W x Depth D x Height H (mm)  100×32×76  Attracting Force (N)  80  Material (Main Unit)  Steel 
    Rating:
    60%
    from S$49.99
    Min. 3 days
  26. single
    Magswitch single
    Work safety is improved because it can be transported without being angular or directly touching hot workpieces. Suitable for transporting small steel plates and steel materials that are heavy enough to be held by hand. * When using for transportation, consider a safety factor of at least 4: 1 fo... Read More
    Dimension b (mm)  123  Dimension c (mm)  97 
    from S$269.90
    Min. 6 days
  27. Mug wheel
    Magswitch Mug wheel
    The entire wheel is a magnet, and the device can be moved while it is attracted to an iron plate or pipe. Suitable for fixing equipment such as positioning guides, steel plate feed, and pipe transportation. Also on the wheels of self-propelled devices.
    from S$299.90
    Min. 6 days
  28. Magudley
    Magswitch Magudley
    Since there is a certain distance between the object to be transported and the handle, it prevents workers from being injured by dropping the object. A transport tool that attaches a lifting magnet to the tip hook to easily transport heavy objects. Suitable for transporting cured steel sheets and... Read More
    Dimension a (mm)  917  Mass (kg)  9.4  Dimension b (mm)  1826  Dimension c (mm)  343 
    from S$669.90
    Min. 6 days
  29. Mini Multi Angle
    Magswitch Mini Multi Angle
    One tool can handle a wide range of angles, which is useful for temporary welding work. Ideal for holding the angle of steel plates.
    Mass (kg)  0.2  Dimension b (mm)  32  Dimension a (mm)  66  Dimension c (mm)  72  Holding Power  Up to 40kg 
    from S$77.99
    Min. 5 days
  30. Snake magnet
    TRUSCO Snake magnet
    A unique welding magnet product with a flexible shaft that allows the workpiece to be held at any angle. The V-pad magnet at the tip can also hold round materials. For temporary attachment and temporary assembly of welding and assembly work.
    Dimension (mm)  (Flat pad) 110 × 50  Material  (Magnet) Neodymium magnet  Flexible part (mm)  (Shaft) 450  Mass (kg)  0.6  Attracting Force (N)  60  Trusco Part No.  818-3843  Included Accessories  Clip for tip option  Material (Main Unit)  Steel 
    from S$68.99
    Min. 32 days
  31. Magnet holder
    KANETEC Magnet holder
    It is a combination of two magnets, and the angle can be set freely. For temporary holding of drilling machines and assembly work. As a simple jig for welding work instead of a thin plate hinge.
    Holding angle (°)  Any 
    from S$129.90
    Min. 2 days
  32. Magneweler for welding
    SK (Niigata Seiki) Magneweler for welding
    For temporary holding and temporary fixing of welding work and assembly work
    Material  Alnico magnet 
    from S$79.99
    Min. 4 days
  33. Steel plate welding magnet
    TRUSCO Steel plate welding magnet
    A magnet holder for welding that securely holds sheet metal, etc. with a strong magnet. With a handle, it is easy to remove. For temporary attachment and temporary assembly of welding and assembly work.
    Material  (Magnet) Ferrite  Mass (kg)  Attracting Force (N)  450  Trusco Part No.  799-3722  Diameter (mm) x Height (mm)  85×140  Material (Main Unit)  Steel 
    from S$159.90
    Min. 2 days
  34. Mag Square Angle
    Magswitch Mag Square Angle
    The position of the magnets on both ends can be adjusted. Holds firmly even for large to small size workpieces. Ideal for holding steel plates and pipes at right angles. Useful for temporary welding work.
    from S$349.90
    Min. 21 days
  35. Magsquare UH
    Magswitch Magsquare UH
    Magnet tools are sensitive to heat and may cause a decrease in magnetic force in an environment exceeding 80 ° C. The new technology "Heat-resistant UH series" can be used in environments up to 180 ° C by improving the housing.
    from S$189.90
    Min. 6 days
  36. Snake magnet
    TRUSCO Snake magnet
    A unique welding magnet product with a flexible shaft that allows the workpiece to be held at any angle. The V-pad magnet at the tip can also hold round materials. For temporary attachment and temporary assembly of welding and assembly work.
    Material  (Magnet) Neodymium magnet  Flexible part (mm)  (Shaft) 305  Dimension (mm)  (V pad) 65 x 35  Mass (kg)  0.5  Attracting Force (N)  80  Trusco Part No.  818-3842  Included Accessories  Clip for tip option  Material (Main Unit)  Steel 
    from S$86.99
    Min. 32 days
  37. Pipet angle
    Magswitch Pipet angle
    The scale is engraved at 5 ° intervals, and the angle can be easily changed by simply turning the shaft lever. Ideal for holding workpieces that require various angle settings. The angle can be set from 22 ° to 270 °.
    Mass (kg)  1.6  Dimension a (mm)  146  Dimension c (mm)  230  Dimension b (mm)  42  Holding Power  Up to 90kg 
    from S$429.90
    Min. 5 days
  38. Magnet holder (strong type) heat resistance 180 ° C
    KANETEC Magnet holder (strong type) heat resistance 180 ° C
    Length (mm)  66  Attracting Force (N)  980  Trusco Part No.  125-6733  Width (mm)  50.2  Height (mm)  44 
    from S$259.90
    Min. 5 days
  39. Magnewelder for welding
    TRUSCO Magnewelder for welding
    Suitable for stable holding by combining joints when welding iron plates, round pipes, and iron balls. For temporary holding and temporary assembly work during welding work.
    Trusco Part No.  232-7058  Mass (g)  270  Holding angle (°)  30、45、60、75、90  Dimension (mm)  65×98×14  Attracting Force (N)  98  Specification  Ferrite magnet  Material  SS400 
    from S$35.99
    Min. 2 days
  40. Boomer Angle
    Magswitch Boomer Angle
    The angle of the magnets on both ends can be adjusted. Holds both flat and curved surfaces strongly. Ideal for heavy pipe and steel sheet setups. Welding from either the inside or the outside is possible.
    from S$679.90
    Min. 6 days
View : Grid List
Filter

Items 1 - 40 of 109

Set Ascending Direction