All Category

Carbon Fiber Welding Blankets

View : Grid List
Filter

33 Item(s)

Set Ascending Direction
  1. Carbon Sheet
    Osaka Spirit Carbon Sheet
    A product that is much lighter than conventional spatter sheets and can be easily carried to the site. In addition, there is no need to process eyelets on the product, it can be easily cut to any size on site with scissors, and it can be said that there is no fraying from the cut part. * When wel... Read More
    Thickness (mm)  Mass (g/m2 400  Color  Black  Specification  Felt processing 
    Rating:
    86%
    from S$42.99
    Min. 2 days
  2. Spatter Felt
    TRUSCO Spatter Felt
    Spatter felt fabrics are lighter and cheaper than traditional textiles. Since there is no texture, it is difficult for slag to enter and it is easy to remove the attached slag. The cut surface does not fray. For slag receiving work. (Sprinkling water is even more effective) * Cannot be used to pr... Read More
    Specification  Class A passing product  Material / Finish  100% flame resistant fiber 
    Rating:
    86%
    from S$53.99
    Min. 2 days
  3. Carbon sheet single side silicone coating
    Osaka Spirit Carbon sheet single side silicone coating
    It is a product that has the characteristics of SG-250 and has a higher drop-out strength than SG-250. Welding of refractory sheets for construction ・ Flame-retardant test for welding sparks JIS A 1323 Class A passed product. The silicone-based resin-coated surface has good spark repelling (perf... Read More
    Mass (g/m2 590  Thickness (mm)  Color  Black x single sided silicon  Type  Single-sided silicon coating 
    Rating:
    83%
    from S$59.99
    Min. 2 days
  4. Incombustible heat insulating mat
    TRUSCO Incombustible heat insulating mat
    Sputter sheet Gold Alpha (passed JIS A1323A class) is used for the outer material and ceramic blanket is used for the inner material, which can also be used as a heat insulating material in high temperature range. Since the silica fiber (high heat resistant glass fiber), which is the material of ... Read More
    Continuous use  1000℃  Thickness (mm)  15  Instant Heat Resistance  1650℃ 
    from S$99.90
    Min. 2 days
  5. Carbon felt PC400
    Osaka Seisakusho Carbon felt PC400
    Carbon felt PC400 is a felt-like sheet made of 100% carbon fiber. Lightweight and excellent in workability. Since it is felt-shaped, it can be cut freely and does not fray. It is hard to tear because it has stronger tensile strength than conventional felt. Welding spark receiver simple protective... Read More
    Thickness (mm)  Color  Black  Material  Carbonized fiber  Specification  Folding around: None  JIS Standard  JIS A 1323 Class A  Eyelet  None 
    from S$53.99
    Min. 4 days
  6. Single-sided carbon felt AD
    TRUSCO Single-sided carbon felt AD
    Single-sided special flame-retardant resin coating on conventional spatter sheet carbon felt. Durability has been further improved. The special flame-retardant resin coated surface repels sparks well, and the non-coated surface on the back surface absorbs water to improve safety. No sewing on she... Read More
    Thickness (mm)  1.65  Specification  Class A passing product  Eyelet Inner Diameter (mm)  Φ12 
    from S$57.99
    Min. 2 days
  7. Carbon cloth # 3000N
    Osaka Seisakusho Carbon cloth # 3000N
    Carbon cloth # 3000N is a domestically produced sheet made of 100% carbon fiber plain weave and impregnated with a flameproofing agent. Since the carbon fiber is impregnated with a flameproofing agent, it has excellent fire resistance and heat resistance. Because it is thick, it can be used as a ... Read More
    Thickness (mm)  2.3  Color  Black  JIS Standard  JIS A 1323 Class A 
    from S$129.90
    Min. 5 days
  8. Carbon cloth 1m × 30m
    Asahi Sangyo (Tarp) Carbon cloth 1m × 30m
    The roll version of the welded spark receiving sheet is ideal for curing sparks that are spread on site. Although it is a thick cloth, it can be easily cut with scissors.
    from S$539.90
    Min. 6 days
  9. 1000x1000mm heat resistant felt sheet
    ESCO 1000x1000mm heat resistant felt sheet
    Dimension (mm)  1000×1000  Esco Part No.  EA334CC-1 
    from S$99.90
    Min. 6 days
  10. Carbon felt 50EX
    TRUSCO Carbon felt 50EX
    Thick material is now available in the "EX type", which is a conventional spatter sheet carbon felt coated with a special flame-retardant resin on one side! The special flame-retardant resin-coated surface repels sparks well, and the non-coated surface on the back side absorbs water and... Read More
    Thickness (mm)  4.5  Continuous heat-resistant temperature (℃)  250 
    from S$139.90
    Min. 3 days
  11. Flameproof felt 2mm roll
    YOSHINO Flameproof felt 2mm roll
    By pressing, the surface is smooth and the thickness is uniform, and the spark receiving performance is improved. Light, supple and easy to work with. Since there is no silicone coating, it is even more effective to use it with water. It can be cut with scissors, and the cut surface will not fray... Read More
    Length (mm)  20000  Thickness (mm)  About 2  Width (mm)  1000  Trusco Part No.  774-8655  Material  100% flame resistant fiber  Length (m)  20  Type  roll  Width (m) 
    from S$859.90
    Min. 6 days
  12. Carbon yarn
    Tambo Shouten Carbon yarn
    from S$119.90
    Min. 8 days
  13. 1000x2000mm heat resistant felt sheet
    ESCO 1000x2000mm heat resistant felt sheet
    Dimension (mm)  1000×2000  Esco Part No.  EA334CC-2 
    from S$199.90
    Min. 6 days
  14. Single-sided carbon felt EX
    TRUSCO Single-sided carbon felt EX
    Single-sided special flame-retardant resin coating on conventional spatter sheet carbon felt. Durability has been further improved. The special flame-retardant resin coated surface repels sparks well, and the non-coated surface on the back surface absorbs water to improve safety. No sewing on she... Read More
    Thickness (mm)  2.5  Eyelet Inner Diameter (mm)  Φ12 
    from S$69.99
    Min. 2 days
  15. 1000x5000mm heat-resistant felt sheet
    ESCO 1000x5000mm heat-resistant felt sheet
    Dimension (mm)  1000×5000  Esco Part No.  EA334CC-5 
    from S$489.90
    Min. 6 days
  16. Carbon cloth
    Tambo Shouten Carbon cloth
    Width (m)  Thickness (mm)  1.4 
    from S$139.90
    Min. 8 days
  17. Carbon tape
    Tambo Shouten Carbon tape
    Length (m)  30  Thickness (mm)  1.4 
    from S$94.99
    Min. 8 days
  18. Carbon sheet single side coating
    MonotaRO Carbon sheet single side coating
    It is much lighter than conventional spatter sheets, is easy to carry on site, and has excellent workability. Flame-retardant rubber, which is cheaper and has the same performance as silicon-based resin, is used on one side. Flame retardancy is improved by using aluminum hydroxide, which is also ... Read More
    JIS Standard  A 1323 Flame retardant class A passed  Thickness (mm)  About 3  Specification  Class A passing product 
    Rating:
    64%
    Discontinued
  19. Single-sided carbon felt roll 1. 65 × 2000 × m units
    TRUSCO Single-sided carbon felt roll 1. 65 × 2000 × m units
    It is coated with a special flame-retardant resin on one side, which repels sparks well, and the non-coated side on the back side absorbs water to improve safety. There are no stitches on the sheets No. 4 and No. 6. Durability has been further improved. * Cannot be used to prevent sparks from sca... Read More
    Mass (kg)  0.54  Length (m)  Thickness (mm)  1.65  Width (mm)  2000  Trusco Part No.  455-1273  JIS Standard  JIS A1323 Class C Passed No. 02A1615  Type  cut 
    Discontinued
  20. Non-combustible insulation mat
    TRUSCO Non-combustible insulation mat
    External material: Sputter sheet Gold Alpha (passed JIS A1323A class) Inner material: Ceramic blanket
    Trusco Part No.  177-2228  Dimension (mm)  300×400  Continuous Use Temperature (℃)  About 1000 ℃  Instantaneous Operating Temperature (℃)  About 1650 
    Discontinued
  21. Pyromex Spatter Sheet Non-woven Type
    Toho Pyromex Spatter Sheet Non-woven Type
    An affordable, low-priced type. It is a shatterproof product. It does not contain harmful fibers such as asbestos or glass fibers that are irritating to the skin.
    Type  roll  Thickness (mm)  0.8 
    Discontinued
  22. Carbon felt (prevents splattering)
    TRUSCO Carbon felt (prevents splattering)
    Carbon felt fabrics are lighter than traditional woven fabrics, and cheap carbon felt fabrics have no texture, so sparks do not escape from the texture. 2.8 mm thick type and 5.0 mm thick with slow heat conduction are available. The cut surface does not fray.
    Trusco Part No.  217-2682  Thickness (mm)  2.8  Continuous Use Temperature (℃)  250℃  Instant Heat Resistance  1300℃  Mass (kg)  7.20  Type  roll  Material  100% flame resistant fiber  Dimensions, Width W x Length L (cm x m)  100×20 
    Discontinued
  23. Spatter sheet Carmalon Non-woven fabric type Pyromex cotton
    Teiken Spatter sheet Carmalon Non-woven fabric type Pyromex cotton
    An affordable, low-priced type. It is a shatterproof product. It does not contain harmful fibers such as asbestos or glass fibers that are irritating to the skin.
    Length (m)  10  Thickness (mm)  0.8mm  Width (mm)  1000  Type  roll  2018 Trusco page  7 0381 
    Discontinued
  24. Carbon felt (prevents splattering)
    TRUSCO Carbon felt (prevents splattering)
    Carbon felt fabrics are lighter than traditional woven fabrics, and cheap carbon felt fabrics have no texture, so sparks do not escape from the texture. 2.8 mm thick type and 5.0 mm thick with slow heat conduction are available. The cut surface does not fray.
    Material  100% flame resistant fiber  Instant Heat Resistance  1300℃  Dimensions, Width W x Length L (cm x m)  100×1  Mass (kg)  0.36  Thickness (mm)  2.8  Type  cut  Trusco Part No.  217-2658  Continuous Use Temperature (℃)  250℃ 
    Discontinued
  25. Flameproof felt 2mm
    YOSHINO Flameproof felt 2mm
    By pressing, the surface is smooth and the thickness is uniform, and the spark receiving performance is improved. Light, supple and easy to work with. Since there is no silicone coating, it is even more effective to use it with water. It can be cut with scissors, and the cut surface will not fray... Read More
    Material  100% flame resistant fiber  Width (mm)  1000  Type  cut  Thickness (mm)  About 2 
    Discontinued
  26. Carbon felt (prevents splattering)
    TRUSCO Carbon felt (prevents splattering)
    Carbon felt fabrics are lighter than traditional woven fabrics, and cheap carbon felt fabrics have no texture, so sparks do not escape from the texture. 2.8 mm thick type and 5.0 mm thick with slow heat conduction are available. The cut surface does not fray.
    Thickness (mm)  2.8  Instant Heat Resistance  1300℃  Type  cut  Material  100% flame resistant fiber  Continuous Use Temperature (℃)  250℃  Dimensions, Width W x Length L (cm x m)  100×5  Trusco Part No.  217-2674  Mass (kg)  1.80 
    Discontinued
  27. Carbon felt (prevents splattering)
    TRUSCO Carbon felt (prevents splattering)
    Carbon felt fabrics are lighter than traditional woven fabrics, and cheap carbon felt fabrics have no texture, so sparks do not escape from the texture. 2.8 mm thick type and 5.0 mm thick with slow heat conduction are available. The cut surface does not fray.
    Trusco Part No.  217-2739  Instant Heat Resistance  1300℃  Material  100% flame resistant fiber  Mass (kg)  0.68  Continuous Use Temperature (℃)  250℃  Type  cut  Dimensions, Width W x Length L (cm x m)  100×1  Thickness (mm)  5.0 
    Discontinued
  28. Single-sided carbon felt roll 2. 5 × 2000 × m units
    TRUSCO Single-sided carbon felt roll 2. 5 × 2000 × m units
    It is coated with a special flame-retardant resin on one side, which repels sparks well, and the non-coated side on the back side absorbs water to improve safety. There are no stitches on the sheets No. 4 and No. 6. Durability has been further improved. * Cannot be used to prevent sparks from sca... Read More
    Mass (kg)  0.84  Length (m)  Thickness (mm)  2.5  Width (mm)  2000  Trusco Part No.  455-1281  JIS Standard  JIS A1323 Class A Passed No. 02A1158  Type  cut 
    Discontinued
  29. Carbon felt (prevents splattering)
    TRUSCO Carbon felt (prevents splattering)
    Carbon felt fabrics are lighter than traditional woven fabrics, and cheap carbon felt fabrics have no texture, so sparks do not escape from the texture. 2.8 mm thick type and 5.0 mm thick with slow heat conduction are available. The cut surface does not fray.
    Trusco Part No.  217-2763  Instant Heat Resistance  1300℃  Material  100% flame resistant fiber  Thickness (mm)  5.0  Type  roll  Dimensions, Width W x Length L (cm x m)  100×10  Mass (kg)  6.80  Continuous Use Temperature (℃)  250℃ 
    Discontinued
  30. Non-combustible insulation mat
    TRUSCO Non-combustible insulation mat
    External material: Sputter sheet Gold Alpha (passed JIS A1323A class) Inner material: Ceramic blanket
    Trusco Part No.  177-2210  Dimension (mm)  200×300  Continuous Use Temperature (℃)  About 1000 ℃  Instantaneous Operating Temperature (℃)  About 1650 
    Discontinued
  31. Carbon felt (prevents splattering)
    TRUSCO Carbon felt (prevents splattering)
    Carbon felt fabrics are lighter than traditional woven fabrics, and cheap carbon felt fabrics have no texture, so sparks do not escape from the texture. 2.8 mm thick type and 5.0 mm thick with slow heat conduction are available. The cut surface does not fray.
    Thickness (mm)  5.0  Dimensions, Width W x Length L (cm x m)  100×5  Type  cut  Mass (kg)  3.40  Trusco Part No.  217-2755  Material  100% flame resistant fiber  Instant Heat Resistance  1300℃  Continuous Use Temperature (℃)  250℃ 
    Discontinued
  32. Carbon felt (prevents splattering)
    TRUSCO Carbon felt (prevents splattering)
    Carbon felt fabrics are lighter than traditional woven fabrics, and cheap carbon felt fabrics have no texture, so sparks do not escape from the texture. 2.8 mm thick type and 5.0 mm thick with slow heat conduction are available. The cut surface does not fray.
    Thickness (mm)  2.8  Trusco Part No.  217-2666  Type  cut  Material  100% flame resistant fiber  Mass (kg)  0.72  Dimensions, Width W x Length L (cm x m)  100×2  Instant Heat Resistance  1300℃  Continuous Use Temperature (℃)  250℃ 
    Discontinued
  33. Carbon felt (prevents splattering)
    TRUSCO Carbon felt (prevents splattering)
    Carbon felt fabrics are lighter than traditional woven fabrics, and cheap carbon felt fabrics have no texture, so sparks do not escape from the texture. 2.8 mm thick type and 5.0 mm thick with slow heat conduction are available. The cut surface does not fray.
    Type  cut  Mass (kg)  1.36  Dimensions, Width W x Length L (cm x m)  100×2  Material  100% flame resistant fiber  Thickness (mm)  5.0  Instant Heat Resistance  1300℃  Trusco Part No.  217-2747  Continuous Use Temperature (℃)  250℃ 
    Discontinued
View : Grid List
Filter

33 Item(s)

Set Ascending Direction