All Category

Gauging Rods

View : Grid List
Filter

14 Item(s)

Set Ascending Direction
  1. For SK gouging carbon DC
    Shoei Shokai For SK gouging carbon DC
    Gouging rods are used for welding back chipping, groove removal, defect chipping of welds, etc. for steel frames, bridges, shipbuilding, can manufacturing, etc., and for cutting hot water and sprue parts of castings, nest chipping, etc. It may be. This is a carbon electrode rod used in the arc ai... Read More
    Type  General purpose  Overall Length (mm)  355 
    Rating:
    80%
    from S$47.99
    Min. 2 days
  2. DC gouging carbon
    Panasonic Smart Factory Solutions DC gouging carbon
    Work efficiency is high and economical, and there is no adverse effect on the metal base material.
    Type  Standard type 
    from S$109.90
    Min. 2 days
  3. DC gouging carbon
    Taimatsu Tech DC gouging carbon
    TAIMATSU is a manufacturer with a 35% share of the world market. Economical with less wear. Due to the high density and high density of carbon, there is little arc breakage. Copper plating method with little variation. The quality is stable and the work efficiency is high. There is little variati... Read More
    Groove Width (mm)  11~13  Working Current (A)  250~350  Rod Length (mm)  355  Groove Depth (mm)  6~9  Rod Diameter (Φmm)  8.0  Cutting allowance (mm)  About 11  Hole Diameter (mm)  About 12  Mass (g/piece)  About 38 
    from S$58.99
    Min. 4 days
  4. For SK gouging carbon exchange
    Shoei Shokai For SK gouging carbon exchange
    Gouging rods are used for welding back chipping, groove removal, defect chipping of welds, etc. for steel frames, bridges, shipbuilding, can manufacturing, etc., and for cutting hot water and sprue parts of castings, nest chipping, etc. It may be. This is a carbon electrode rod used in the arc ai... Read More
    Type  General purpose  Overall Length (mm)  355 
    from S$79.99
    Min. 5 days
  5. DC gouging carbon
    Taimatsu Tech DC gouging carbon
    TAIMATSU is a manufacturer with a 35% share of the world market. Economical with less wear. Due to the high density and high density of carbon, there is little arc breakage. Copper plating method with little variation. The quality is stable and the work efficiency is high. There is little variati... Read More
    Groove Depth (mm)  10~13  Rod Diameter (Φmm)  11.0  Groove Width (mm)  14~16  Rod Length (mm)  355  Working Current (A)  450~600  Cutting allowance (mm)  About 14  Hole Diameter (mm)  About 15  Mass (g/piece)  About 68 
    from S$88.99
    Min. 4 days
  6. Gouging carbon for AC
    Panasonic Smart Factory Solutions Gouging carbon for AC
    A special arc stabilizer is blended to make it suitable for AC power, and it is hollow.
    Rod Length (mm)  305 
    from S$129.90
    Min. 5 days
  7. DC gouging carbon
    Taimatsu Tech DC gouging carbon
    TAIMATSU is a manufacturer with a 35% share of the world market. Economical with less wear. Due to the high density and high density of carbon, there is little arc breakage. Copper plating method with little variation. The quality is stable and the work efficiency is high. There is little variati... Read More
    Working Current (A)  200~250  Rod Length (mm)  355  Groove Depth (mm)  4~6  Rod Diameter (Φmm)  6.5  Groove Width (mm)  9~11  Hole Diameter (mm)  About 10  Mass (g/piece)  About 24  Cutting allowance (mm)  About 9 
    from S$57.99
    Min. 2 days
  8. DC gouging carbon
    Taimatsu Tech DC gouging carbon
    TAIMATSU is a manufacturer with a 35% share of the world market. Economical with less wear. Due to the high density and high density of carbon, there is little arc breakage. Copper plating method with little variation. The quality is stable and the work efficiency is high. There is little variati... Read More
    Working Current (A)  150~200  Rod Length (mm)  305  Groove Depth (mm)  3~4  Rod Diameter (Φmm)  4.0  Groove Width (mm)  6~8  Mass (g/piece)  About 10  Cutting allowance (mm)  About 7  Hole Diameter (mm)  About 8 
    from S$88.99
    Min. 4 days
  9. DC gouging carbon
    Taimatsu Tech DC gouging carbon
    TAIMATSU is a manufacturer with a 35% share of the world market. Economical with less wear. Due to the high density and high density of carbon, there is little arc breakage. Copper plating method with little variation. The quality is stable and the work efficiency is high. There is little variati... Read More
    Groove Width (mm)  12~14  Working Current (A)  350~400  Rod Length (mm)  355  Groove Depth (mm)  6~10  Rod Diameter (Φmm)  9.0  Cutting allowance (mm)  About 12  Hole Diameter (mm)  About 13  Mass (g/piece)  About 45 
    from S$67.99
    Min. 4 days
  10. DC gouging carbon
    Taimatsu Tech DC gouging carbon
    TAIMATSU is a manufacturer with a 35% share of the world market. Economical with less wear. Due to the high density and high density of carbon, there is little arc breakage. Copper plating method with little variation. The quality is stable and the work efficiency is high. There is little variati... Read More
    Groove Width (mm)  13~15  Working Current (A)  350~450  Rod Length (mm)  355  Groove Depth (mm)  8~12  Rod Diameter (Φmm)  9.5  Cutting allowance (mm)  About 13  Hole Diameter (mm)  About 14  Mass (g/piece)  About 50 
    from S$79.99
    Min. 4 days
  11. DC gouging carbon
    Taimatsu Tech DC gouging carbon
    TAIMATSU is a manufacturer with a 35% share of the world market. Economical with less wear. Due to the high density and high density of carbon, there is little arc breakage. Copper plating method with little variation. The quality is stable and the work efficiency is high. There is little variati... Read More
    Working Current (A)  150~200  Rod Length (mm)  305  Groove Depth (mm)  3~5  Rod Diameter (Φmm)  5.0  Groove Width (mm)  7~9  Mass (g/piece)  About 14  Cutting allowance (mm)  About 8  Hole Diameter (mm)  About 8 
    from S$94.99
    Min. 5 days
  12. Gouging rod CeRTANIuM 100 100 1.0KG
    CeRTANIuM Gouging rod CeRTANIuM 100 100 1.0KG
    An arc gouging rod that can be used without air. It can be used for groove and cutting of all metals other than magnesium. * Please read the usage procedure manual before use.
    Rod Diameter (Φmm)  4.0  Rod Length (mm)  350  Welding Method  Manual welding AC / DC  Suitable for  All metals except magnesium  Material standard  Iron dioxide  Current Range (A)  275-400 
    from S$149.90
    Min. 5 days
  13. Gouging rod CeRTANIuM 100 100 1.0KG
    CeRTANIuM Gouging rod CeRTANIuM 100 100 1.0KG
    An arc gouging rod that can be used without air. It can be used for groove and cutting of all metals other than magnesium. * Please read the usage procedure manual before use.
    Welding Method  Manual welding AC / DC  Rod Length (mm)  350  Suitable for  All metals except magnesium  Material standard  Iron dioxide  Current Range (A)  250-350  Rod Diameter (Φmm)  3.2 
    from S$159.90
    Min. 5 days
  14. Cutting rod
    NIKKO YOZAI MFG Cutting rod
    It is designed for cutting metal materials that are difficult to cut with gas, such as cast iron and stainless steel. Since a special coating material is applied, the arc stability is good, the heat resistance of the coating material is high, and extremely high cutting efficiency is exhibited.
    Color  Stick end / purple 
    Rating:
    100%
    Discontinued
View : Grid List
Filter

14 Item(s)

Set Ascending Direction