All Category

Welding Rods for Cast Iron

For castings, we refer to products used for casting, among other welding rods used for metal welding. The most commonly used material is pure nickel. In addition, there are iron / nickel and copper / nickel materials. Some have reduced the effect on the base material by not requiring the residual heat of the base material. Those that can handle not only welding between castings but also welding of iron and copper can be used for many castings. Products for coated arc welding, in which the core wire is coated with flux, etc., realize protection of the metal to be welded and stability of the arc.
View : Grid List
Filter

24 Item(s)

Set Ascending Direction
  1. Welding rod for casting
    TRUSCO Welding rod for casting
    Using pure nickel core wire, the welded part is rough, machining is easy, welding strain and stress are less generated, and cracks are less likely to occur. The arc is stable and the slag peeling is good. Repair welding of general cast iron.
    Rating:
    80%
    from S$37.99
    Min. 2 days
  2. Welding rod For casting
    H&H Welding rod For casting
    This product is a repacked product made by Nikko Molten Co., Ltd. for small-lot sales. Since it uses a nickel core wire and is coated with a special flux, it can be used with a lower current than other companies' products.
    Specification  Arc welding rod  Coating  Graphite  JIS Standard  Z3252 DFCNi 
    Rating:
    88%
    from S$37.99
    Min. 2 days
  3. Coated arc welding rod T-1 for low voltage casting
    STAR ELECTRIC MANUFACTURING (SUZUKID) Coated arc welding rod T-1 for low voltage casting
    A shielded metal arc welding rod for low-voltage castings.
    Rating:
    60%
    from S$26.99
    Min. 2 days
  4. Shielded Metal Arc Welding Rod (for Cast Iron) DM-70
    NIKKO YOZAI MFG Shielded Metal Arc Welding Rod (for Cast Iron) DM-70
    DM-70 is a low hydrogen type welding rod for cast iron that uses mild steel core wire. Since it has very good compatibility with the base material, it is ideal for overlaying cast iron parts such as ingot cases whose material has changed due to the influence of heat. Overlay repair of ingot cases... Read More
    Insulation  Low hydrogen type  Color  Stick end / peach  JIS Standard  Z3252 E C St 
    Rating:
    60%
    from S$63.99
    Min. 2 days
  5. Casting welding rod Casting No. 35
    TASETO Casting welding rod Casting No. 35
    Taseto Casting No. 35 is an iron / nickel-based welding rod, which has excellent strength at the welded part, and is used for thick-walled parts and pressure-resistant parts. * If the welding rod absorbs moisture, dry it at about 100 ° C for 1 hour. * No preheating or postheating is required. * B... Read More
    JIS Standard  ECNiFe-CI applicable  AWS Standard  ENiFe-CI equivalent 
    Rating:
    100%
    from S$299.90
    Min. 2 days
  6. Cast iron welding rod
    Kobelco (Kobe Steel) Cast iron welding rod
    A coated rod using 55% Ni wire, which is used for welding spheroidal graphite cast iron and repairing various types of cast iron. The curability of the weld metal and heat-affected zone is small, the coefficient of thermal expansion is close to that of cast iron, and the crack resistance is good.... Read More
    AWS Standard  A5.15 ENiFe-CI  JIS Standard  Z3252 DFCNiFe 
    from S$479.90
    Min. 2 days
  7. Welding rod for casting
    IKURA SEIKI Welding rod for casting
    from S$34.99
    Min. 2 days
  8. Cast iron welding rod
    Kobelco (Kobe Steel) Cast iron welding rod
    A graphite-coated welding rod that uses pure Ni core wire, and is used for butt welding and repair welding of various cast irons. The curability of the weld metal and the heat-affected zone of cast iron is the smallest among the welding rods for cast iron, and the machinability of the weld is the... Read More
    Rod Length (mm)  350 
    from S$679.90
    Min. 5 days
  9. Coated arc bar for cast iron FN-1
    TOKUDEN Coated arc bar for cast iron FN-1
    It is a welding rod for cast iron repair joining by cold welding using iron-nickel core wire, and there is no difference in performance and there is a slight difference in workability. Welded metal has excellent mechanical properties and weldability, and is highly reliable for pressure-resistant ... Read More
    Coating  graphite  AWS Standard  A5.15 ENi-CI  JIS Standard  Z3252 DFCNi 
    from S$349.90
    Min. 7 days
  10. Casting welding rod Casting special name
    TASETO Casting welding rod Casting special name
    Taseto Casting Special No. is a nickel-based welding rod that is resistant to defects such as blow holes and cracks without preheating the base metal, and is easy to machine. It is used for filling nests, joining, and repairing cracks in various cast irons. * If the welding rod absorbs moisture, ... Read More
    AWS Standard  ENi-CI equivalent  JIS Standard  ECNi-CI applicable 
    from S$389.90
    Min. 5 days
  11. Casting welding rod Casting No. 1
    TASETO Casting welding rod Casting No. 1
    Taseto Casting No. 1 is a copper / nickel welding rod that can weld castings without preheating. It can also be machined after welding. * If the welding rod absorbs moisture, dry it at about 100 ° C for 1 hour. * No preheating or postheating is required. * Before starting work, completely remove ... Read More
    JIS Standard  ECNiCu applicable 
    from S$299.90
    Min. 5 days
  12. Coated arc bar for cast iron FN-S
    TOKUDEN Coated arc bar for cast iron FN-S
    Since a special iron nickel core wire is used, it can be welded to the end without burning the rod. Welded metal has excellent mechanical properties and weldability, and is highly reliable for pressure-resistant parts and thick parts. The workability is also good, the welded part is less hardened... Read More
    Coating  graphite  AWS Standard  A5.15 ENi-CI  JIS Standard  Z3252 DFCNi  Rod Length (mm)  350 
    from S$869.90
    Min. 10 days
  13. Arc welding rod for all cast iron CeRTANIuM 7500
    CeRTANIuM Arc welding rod for all cast iron CeRTANIuM 7500
    Thick material of all cast iron can be melted with high current and welded well. For all cast iron, for welding castings and castings, castings and iron, etc., for welding dirty and oil-soaked engine blocks, gear housings, etc. * Please read the usage procedure manual before use.
    Material standard  Ni,Cu,Fe,Si  Rod Length (mm)  350  Current Range (A)  65-120  Rod Diameter (Φmm)  3.2  Elongation (%)  50  Hardness  170B  Welding Method  Manual welding AC / DC 
    from S$239.90
    Min. 5 days
  14. Cast iron welding rod
    Kobelco (Kobe Steel) Cast iron welding rod
    A 0.5% Mo weld metal is obtained. Standard type, 0.5% steel is used for the core wire. Welding of 0.5% Mo steel used for high temperature boilers, petrochemical equipment, etc.
    AWS Standard  A5.15 ESt  JIS Standard  Z3252 DFCFe 
    from S$639.90
    Min. 5 days
  15. Arc welding rod for all cast iron CeRTANIuM 7500
    CeRTANIuM Arc welding rod for all cast iron CeRTANIuM 7500
    Thick material of all cast iron can be melted with high current and welded well. For all cast iron, for welding castings and castings, castings and iron, etc., for welding dirty and oil-soaked engine blocks, gear housings, etc. * Please read the usage procedure manual before use.
    Material standard  Ni,Cu,Fe,Si  Rod Diameter (Φmm)  3.2  Rod Length (mm)  350  Welding Method  Manual welding AC / DC  Current Range (A)  65-120  Elongation (%)  50  Hardness  170B 
    from S$399.90
    Min. 5 days
  16. Covered arc rod SN-1 for cast iron
    TOKUDEN Covered arc rod SN-1 for cast iron
    It is a welding rod for repair and joining cast iron by cold welding using pure nickel wire, but there is a slight difference in workability. SN-1 improves the flow of weld metal, and the bead spreads better and becomes flatter than SN. Machining is easy because the welded part is less hardened, ... Read More
    Coating  graphite  AWS Standard  A5.15 ENi-CI  JIS Standard  Z3252 DFCNi  Rod Length (mm)  350 
    from S$859.90
    Min. 10 days
  17. Covered arc rod for cast iron EN
    TOKUDEN Covered arc rod for cast iron EN
    Although it is a pure nickel welding rod, a special element is added to the weld metal, and it exhibits excellent performance against cracks and thermal shock as well as strength. Machining is easy because the welded part is less hardened, and it is also suitable for welding parts that receive wa... Read More
    Coating  graphite  Rod Length (mm)  350  AWS Standard  A5.15 ENi-CI  JIS Standard  Z3252 DFCNi 
    from S$889.90
    Min. 10 days
  18. Covered arc rod for cast iron VA-10
    TOKUDEN Covered arc rod for cast iron VA-10
    A shielded metal arc welding rod developed as a welding material that requires machinability and wear resistance for overlay welding to cast iron. Since the component of the weld metal is alloy steel, it has higher hardness than conventional nickel-based weld metals, so it has good wear resistanc... Read More
    Coating  Low hydrogen  Rod Length (mm)  350 
    from S$379.90
    Min. 7 days
  19. Coated arc bar for cast iron T-SN
    TOKUDEN Coated arc bar for cast iron T-SN
    Rod Diameter (Φmm)  Rod Length (mm)  1000 
    from S$999.00
    Min. 10 days
  20. Arc welding rod for all cast iron CeRTANIuM 7500
    CeRTANIuM Arc welding rod for all cast iron CeRTANIuM 7500
    Thick material of all cast iron can be melted with high current and welded well. For all cast iron, for welding castings and castings, castings and iron, etc., for welding dirty and oil-soaked engine blocks, gear housings, etc. * Please read the usage procedure manual before use.
    Rod Diameter (Φmm)  3.2  Welding Method  Manual welding AC / DC  Material standard  Ni,Cu,Fe,Si  Elongation (%)  50  Current Range (A)  65-120  Rod Length (mm)  350  Hardness  170B 
    from S$379.90
    Min. 5 days
  21. Covered arc rod SN for cast iron
    TOKUDEN Covered arc rod SN for cast iron
    It is a welding rod for repair and joining cast iron by cold welding using pure nickel wire, but there is a slight difference in workability. SN-1 improves the flow of weld metal, and the bead spreads better and becomes flatter than SN. Machining is easy because the welded part is less hardened, ... Read More
    Coating  graphite  JIS Standard  Z3252 DFCNi  Rod Length (mm)  350  AWS Standard  A5.15 ENi-CI 
    from S$859.90
    Min. 10 days
  22. Coated arc bar for cast iron FN
    TOKUDEN Coated arc bar for cast iron FN
    It is a welding rod for cast iron repair joining by cold welding using iron-nickel core wire, and there is no difference in performance and there is a slight difference in workability. Welded metal has excellent mechanical properties and weldability, and is highly reliable for pressure-resistant ... Read More
    Coating  graphite  AWS Standard  A5.15 ENi-CI  JIS Standard  Z3252 DFCNi 
    from S$349.90
    Min. 10 days
  23. Covered arc rod for cast iron T-FN
    TOKUDEN Covered arc rod for cast iron T-FN
    Rod Length (mm)  1000 
    from S$889.90
    Min. 10 days
  24. Covered arc welding rod (for cast iron) DM-150
    NIKKO YOZAI MFG Covered arc welding rod (for cast iron) DM-150
    DM-150 is a welding rod for cast iron that can be used with a lower current than other companies' products because it uses an iron-nickel core wire and is coated with a special flux. Therefore, the fusion part is less hardened and the welded part can be easily machined. It is particularly sui... Read More
    AWS Standard  A5.15 ENiFe-CⅠ Applicable  Current Range (A)  Downward / 50-80  Insulation  Graphite  Color  Rod end / yellow  JIS Standard  Z3252 E C NiFe-CⅠ 
    Discontinued
View : Grid List
Filter

24 Item(s)

Set Ascending Direction