All Category

Welding Rods for Mild Steel / High Tension Steel

View : Grid List
Filter

Items 1 - 40 of 157

Set Ascending Direction
  1. Welding rod for mild steel to 550 MPa class steel
    Kobelco (Kobe Steel) Welding rod for mild steel to 550 MPa class steel
    A lime titanian welding rod with good welding workability, X-ray performance and mechanical properties. It has excellent workability in all postures and contains a large amount of iron powder in the coating material, so the welding speed is fast, the re-arcability is good, and the work efficiency... Read More
    Remark  Classification: NK, AB, LR, NV, BV  Adsorption  120J / energy (example)  Color  Bar end color: White  Elongation (%)  32 (example)  Tensile Strength (N/mm2 460 (example)  Yield Point (N/mm2 410 (example)  JIS Standard  Z3211、D4303 
    Rating:
    100%
    from S$47.99
    Min. 2 days
  2. Welding rods
    NIKKO YOZAI MFG Welding rods
    Iron powder is added to the lime titanian coating material to re-arc and improve work efficiency. Especially in the case of fillet welding, the slag has good peelability, a beautiful bead appearance and excellent welding use novi can be obtained, which is unrivaled. In addition, by using a high c... Read More
    Elongation (%)  32  Yield Point (N/mm2 425  Tensile Strength (N/mm2 466  Shock Resistance (Destruction)  Impact value: 114J  Coating  Lime titania type  Insulation  Lime titania type  Color  Rod end / Orange  JIS Standard  Z3211 E4303 
    from S$229.90
    Min. 4 days
  3. Mild Steel~550 MP a Class Steel Welding Rod
    Kobelco (Kobe Steel) Mild Steel~550 MP a Class Steel Welding Rod
    A lime titanian welding rod that reduces the amount of fume generated during welding by about 30% compared to welding rods of the same type. It is an excellent welding rod with good re-arcability and bead elongation, and very good for slag peeling. Since the coating has good flexibility, it can b... Read More
    AWS Standard  A5.1 E6013 applicable  Coating  Lime titania type  JIS Standard  Z3211 E4303 (formerly Z3211 D4303) 
    Rating:
    91%
    from S$26.99
    Min. 2 days
  4. Coated arc welding rod for low voltage mild steel B-1
    STAR ELECTRIC MANUFACTURING (SUZUKID) Coated arc welding rod for low voltage mild steel B-1
    Stable arc welding is possible even at low voltage such as 100V / 200V small welding machines. Shielded metal arc welding rod for low voltage mild steel. A high titanium oxide welding rod suitable for welding thin plates and light structures where appearance is important.
    JIS Standard  JISZ3211E4313 
    Rating:
    87%
    from S$8.89
    Min. 2 days
  5. Welding Rod LB-52
    Kobelco (Kobe Steel) Welding Rod LB-52
    A welding rod with good bead appearance and slag peelability, as well as excellent X-ray performance and mechanical properties. Welding of shipbuilding, bridges, construction, pressure vessels, etc. using mild steel and 490N / mm class 2 high-strength steel
    AWS Standard  A5.1 E7016 applicable  JIS Standard  Z3211 E4916 U (former Z3212 D5016) 
    Rating:
    95%
    from S$56.99
    Min. 2 days
  6. Welding rod for mild steel to 550 MPa class steel
    Kobelco (Kobe Steel) Welding rod for mild steel to 550 MPa class steel
    A welding rod designed with both workability and weldability in mind, and can be applied to all-position butt welding and fillet welding from thin plates to thick plates of about 20 mm or less. The horizontal fillet welding gives good slag and good spread of the beat, and the appearance of the be... Read More
    Adsorption  110J / energy (example)  AWS Standard  AWS A5.1 E6019 applicable  Color  Stick end color: light brown  Elongation (%)  32 (example)  Standard  Patent No.1533782  Tensile Strength (N/mm2 460 (example)  Yield Point (N/mm2 410 (example) 
    Rating:
    94%
    from S$45.99
    Min. 2 days
  7. Welding rods
    JKW (JFE Welding Rod) Welding rods
    The arc is soft and there is less spatter. The re-arc is very good. The amount of fume generated during welding is small, improving the working environment at the welding site. It has a wide welding current width and good rod bendability, so it has excellent workability in all postures. The slag ... Read More
    Type  For mild steel  Coating  Lime titania type  Specification  Shinko ZERODE-44 or equivalent  JIS Standard  Z3211E4303 
    Rating:
    92%
    from S$44.99
    Min. 2 days
  8. Welding rod for mild steel to 550 MPa class steel
    Kobelco (Kobe Steel) Welding rod for mild steel to 550 MPa class steel
    Designed with an emphasis on welding workability, it can be applied to all-position butt welding and fillet welding from thin plates to thick plates of about 20 mm or less. Especially in downward welding, the slag fog is stable, slag is less likely to get caught, and a stable, glossy and beautifu... Read More
    AWS Standard  AWS A5.1 E6019 applicable  Elongation (%)  30 (example)  Color  Bar end color: green  Yield Point (N/mm2 400 (example)  Adsorption  95J / energy (example)  Tensile Strength (N/mm2 450 (example)  Standard  Patent No.1533782 
    Rating:
    93%
    from S$45.99
    Min. 2 days
  9. Welding Rod for Mild Steel to 550 MPa Class Steel
    Kobelco (Kobe Steel) Welding Rod for Mild Steel to 550 MPa Class Steel
    Designed with an emphasis on weldability, it has excellent crack resistance, pit resistance and X-ray performance among illuminant-based welding rods.
    Color  Bar end color: yellow  Coating  Illuminite series  JIS Standard  Z3211 E4319 (former Z3211 D4301) 
    Rating:
    76%
    from S$53.99
    Min. 2 days
  10. Welding rod for mild steel to 550 MPa class steel
    Kobelco (Kobe Steel) Welding rod for mild steel to 550 MPa class steel
    A low hydrogen omnidirectional welding rod for mild steel designed with efficiency in mind in addition to weldability and workability. The weld metal has excellent X-ray performance, mechanical properties, and workability in all postures, and because the coating material contains iron powder, the... Read More
    Remark  Classification: NK, AB, LR, DNV, BV, CR  Color  Bar end color: Blue white  JIS Standard  Z3211 E4316 U (former Z3211 D4316) 
    Rating:
    78%
    from S$37.99
    Min. 2 days
  11. Lime titania coated arc welding rod NS-03Hi
    Nippon STeel Welding & Engineering (Former Nippon Steel & Sumikin Welding) Lime titania coated arc welding rod NS-03Hi
    Low fume, low moisture absorption type For general structures. Compared to the same type of welding rod, the amount of fume during welding is reduced by about 20%. It has excellent re-arcability, and smooth temporary welding can be performed even with a small welding machine or engine welder with... Read More
    Specification  Shinko ZERODE-44 or equivalent 
    Rating:
    95%
    from S$26.99
    Min. 2 days
  12. Low Current Mild Steel Shielded Metal Arc Welding Rod For Small Welding Machine
    NIKKO YOZAI MFG Low Current Mild Steel Shielded Metal Arc Welding Rod For Small Welding Machine
    Convenient welding rod Insulation in a portable case, anyone can easily weld, and a beautiful bead can be obtained with little spatter adhesion even at low currents. In particular, the slag in fillet welding has good peelability and improves work efficiency. Thin plates and general hardware, cons... Read More
    Rating:
    85%
    from S$13.99
    Min. 2 days
  13. Welding Rod for Mild Steel to 550 MPa Class Steel
    Kobelco (Kobe Steel) Welding Rod for Mild Steel to 550 MPa Class Steel
    A highly titanium oxide welding rod that has good workability especially in downward and horizontal fillet welding. Welding and decorative filling of thin plates and light structures such as general machines, vehicles, and lightweight steel frames that use mild steel
    Coating  High titanium oxide  JIS Standard  Z3211 E4313 (old Z3211 D4313) 
    Rating:
    98%
    from S$29.99
    Min. 2 days
  14. Starload Z-3 Coated arc welding rod for mild steel
    STAR ELECTRIC MANUFACTURING (SUZUKID) Starload Z-3 Coated arc welding rod for mild steel
    With advanced welding technology, stable arc and slag fluidity and re-arcability are good, and high-efficiency welding can be expected. Has a high level of welding technology workability. Stable arc, slag fluidity, and maximum arc performance are good, and high-efficiency welding is possible. Wel... Read More
    Elongation (%)  30 or more  Type  Lime titania and JIS / D4303 equivalent 
    Rating:
    90%
    from S$13.99
    Min. 2 days
  15. Star Road electric welding rod (general for iron) B-3
    STAR ELECTRIC MANUFACTURING (SUZUKID) Star Road electric welding rod (general for iron) B-3
    Shielded metal arc welding rod for basic mild steel. * Be sure to read the instruction manual of the welding machine to be used before use. * Do not look directly at the arc light during welding. Use a light-shielding surface as it may damage your eyes. * Welded parts are hot. Be careful not to g... Read More
    Elongation (%)  17 or more  Type  Lime titania and JIS / D4303 equivalent 
    Rating:
    85%
    from S$9.69
    Min. 2 days
  16. General mild steel welding rod
    TRUSCO General mild steel welding rod
    A lime titanian welding rod containing approximately 30% iron powder in the coating agent. It has excellent re-arcing properties and good bead elongation, making it ideal for intermittent welding, fillet welding, tack welding (temporary attachment), etc. Thin / middle plate Welding of general str... Read More
    Color  (Stick end) red  JIS Standard  JIS Z3211D4303 standard product 
    Rating:
    85%
    from S$13.99
    Min. 2 days
  17. Welding rod RB-26
    Kobelco (Kobe Steel) Welding rod RB-26
    A high titanium oxide welding rod that can be welded vertically and downward with a rod diameter of 1.6 to 5.0 mm. Since the arc is stable and a glossy bead with less spatter can be obtained, it is ideal for welding thin plates and light structures, mainly vertical downward welding. For vertical ... Read More
    Elongation (%)  23 (example)  Tensile Strength (N/mm2 510 (example)  Color  Bar end color: Black  Yield Point (N/mm2 450 (example) 
    Rating:
    83%
    from S$29.99
    Min. 2 days
  18. Mild Steel Welding Rod
    TRUSCO Mild Steel Welding Rod
    A high titanium oxide welding rod with good workability in downward and horizontal fillet welding, with stable arc, less spatter, and good slag peelability. Welding rods for low-voltage welding machines for thin plates and light structures (100V compatible). Welding of general machinery, vehicles... Read More
    Specification  Shinko B-33 or equivalent  Color  (Stick end) white  JIS Standard  JIS Z3211D4313 standard product 
    Rating:
    86%
    from S$7.19
    Min. 2 days
  19. Welding rod for mild steel to 550 MPa class steel
    Kobelco (Kobe Steel) Welding rod for mild steel to 550 MPa class steel
    It is used for the first layer of the joint, and the back side can be omitted, which contributes to efficiency improvement. The arc is designed to be stable on the lower current side than general welding. A beautiful back bead is obtained and it is also used in skill competitions. It is often use... Read More
    AWS Standard  A5.1 E7016 applicable  JIS Standard  Z3211 E4316 (former Z3211 D4316) 
    Rating:
    100%
    from S$57.99
    Min. 2 days
  20. Welding rod for mild steel to 550 MPa class steel
    Kobelco (Kobe Steel) Welding rod for mild steel to 550 MPa class steel
    The most basic low hydrogen rod. It has excellent X-ray performance and mechanical properties, good arc stability, slag peeling, and bead appearance, and can be easily welded to all postures. It is also used for skill tests.
    Rating:
    100%
    from S$57.99
    Min. 2 days
  21. Covered arc welding rod (for mild steel) NZ-11
    NIKKO YOZAI MFG Covered arc welding rod (for mild steel) NZ-11
    NZ-11 is a special shielded metal arc welding rod developed for welding hot-dip galvanized steel materials, and is designed to have excellent pore resistance to pits, blow holes, etc. even if it is welded as it is without peeling the plating film. Therefore, the number of repair steps due to the ... Read More
    Color  Rod end / green  Insulation  Special system  JIS Standard  Z3211 E4340 
    Rating:
    93%
    from S$75.99
    Min. 2 days
  22. Covered arc welding rod (for mild steel) LC-3
    NIKKO YOZAI MFG Covered arc welding rod (for mild steel) LC-3
    LC-3 is made by adding iron powder to a lime titanian coating to improve the efficiency of re-arc and work. Especially in the case of fillet welding, the slag has good peelability, a beautiful bead appearance and excellent welding growth can be obtained, which is unrivaled by other companies. In ... Read More
    Insulation  Lime titania type  Color  Rod end / Orange  JIS Standard  Z3211 E4303 
    Rating:
    100%
    from S$34.99
    Min. 2 days
  23. Mild Steel~550 MP a Class Steel Welding Rod
    Kobelco (Kobe Steel) Mild Steel~550 MP a Class Steel Welding Rod
    This is the world's first low-hydrogen welding rod exclusively for vertical downward movement, which was developed for the purpose of improving the efficiency of vertical welding. The slag naturally peels off, the weld metal has excellent crack resistance, and the mechanical properties are al... Read More
    Adsorption  180J / energy (example)  Tensile Strength (N/mm2 560 (one example)  Elongation (%)  32 (example)  JIS Standard  Z3211 EU4948  AWS Standard  AWS A5.1 E7048 applicable  Yield Point (N/mm2 480 (example) 
    Rating:
    100%
    from S$49.99
    Min. 2 days
  24. Welding Rod for High Strength Steel
    Kobelco (Kobe Steel) Welding Rod for High Strength Steel
    550 to 610N / mm A moisture-resistant, ultra-low hydrogen omnidirectional welding rod designed for class 2 high-strength steel. The weld metal has excellent X-ray performance and mechanical properties, and the amount of hydrogen is kept low, so crack resistance is also good. In terms of workabili... Read More
    Adsorption  150J / energy [(-20 ℃) example]  Elongation (%)  30 (example)  Yield Strength (N/mm2 550 (0.2%, one example)  Tensile Strength (N/mm2 650 (one example)  Remark  Classification: NK, AB, LR, NV, BV, CR  JIS Standard  Z3211 E6216-N1M1 U 
    Rating:
    100%
    from S$39.99
    Min. 2 days
  25. Welding Rod for General Low Current & Thin Plate
    H&H Welding Rod for General Low Current & Thin Plate
    This product is a repacked product of Nichia Welding Rod (Nikko Laminates Industry Co., Ltd.) for small-lot sales.
    Coating  High titanium oxide  JIS Standard  Z3211 E4313 (old Z3211 D4313) 
    Rating:
    93%
    from S$7.99
    Min. 2 days
  26. TIG welding rod for stainless steel 500mm
    TRUSCO TIG welding rod for stainless steel 500mm
    TIG welding rod for stainless steel. * The downward range value of the current range (A) is a reference value.
    Rod Length (mm)  500 
    from S$19.99
    Min. 2 days
  27. Welding rods
    Nippon STeel Welding & Engineering (Former Nippon Steel & Sumikin Welding) Welding rods
    490N / mm Low hydrogen type all-position welding rod for class 2 high-strength steel. It has excellent crack resistance of weld metal, and has good mechanical properties and X-ray performance. In particular, it is extremely easy to stand upright and upward, and is a representative brand of tradit... Read More
    JIS Standard  Z3211 E4916U (old Z3212 D5016)  AWS Standard  A5.1 E7016 applicable  Coating  Low hydrogen type 
    Rating:
    100%
    from S$259.90
    Min. 2 days
  28. Welding rod For general mild steel
    H&H Welding rod For general mild steel
    A product in which Nittetsu Sumikin Welding Co., Ltd. 03A or 00 is repacked for small-lot sales.
    Rating:
    90%
    from S$9.69
    Min. 2 days
  29. Welding rods
    Nippon STeel Welding & Engineering (Former Nippon Steel & Sumikin Welding) Welding rods
    It is a high titanium oxide welding rod that is the easiest to use for all-position welding of thin plates. The arc is gentle, there is little spatter, and there is no worry of melting. The slag naturally peels off, resulting in a beautiful shiny bead. Ideal for welding thin plates and lightweigh... Read More
    Coating  High titanium oxide 
    from S$259.90
    Min. 2 days
  30. Welding rod BI-14
    Kobelco (Kobe Steel) Welding rod BI-14
    It contains a large amount of iron powder and has excellent efficiency. Workability is good in all postures, and it has excellent slag peeling and re-arcing properties. * The current range is for reference only and does not compensate for the technology.
    JIS Standard  Z3211 E4319 (former Z3211 D4301)  AWS Standard  A5.1 E6019 applicable 
    from S$78.99
    Min. 2 days
  31. Welding rod for high strength steel
    Kobelco (Kobe Steel) Welding rod for high strength steel
    520N / mm Low hydrogen omnidirectional welding rod for class 2 high-strength steel. Workability in all postures, especially arc stability, slag peeling, and bead appearance are good. In addition to welding 520N / mm class 2 high-strength steel, it is also suitable for underlay welding of hardened... Read More
    Adsorption  200J / energy (example)  Yield Point (N/mm2 510 (example)  Tensile Strength (N/mm2 600 (one example)  Elongation (%)  29 (example)  AWS Standard  A5.5, applicable to E7016-G  JIS Standard  Z3211、D5316 
    from S$58.99
    Min. 2 days
  32. Ikura Road welding rod
    IKURA SEIKI Ikura Road welding rod
    It melts well and is easy to use.
    from S$15.99
    Min. 5 days
  33. Lime titania coated arc welding rod NS-03T
    Nippon STeel Welding & Engineering (Former Nippon Steel & Sumikin Welding) Lime titania coated arc welding rod NS-03T
    It is a lime titanian welding rod that has excellent re-arc resistance and bar burn resistance, and is ideal for use in harsh environments because it does not easily chip flux. In addition, the bead growth is good and contributes to the improvement of work efficiency. It also has excellent bar be... Read More
    Color  (Stick end) yellow, (stick side) brown  JIS Standard  Z 3211 E4303-U 
    from S$149.90
    Min. 5 days
  34. Star Road electric welding rod (low voltage for iron) B-1
    STAR ELECTRIC MANUFACTURING (SUZUKID) Star Road electric welding rod (low voltage for iron) B-1
    It can be used with a welding machine with a 100V power supply. Low voltage mild steel coated arc welding rod. Used for welding mild steel materials. Suitable for welding thin plates and light structures where appearance is important. If you use a small low voltage welder, use this type of weldin... Read More
    Welding Thickness (mm)  1.2~3.0  Rod Diameter (Φmm)  1.4  JIS Standard  JIS / D4313 equivalent  Material  High titanium oxide  Rod Length (mm)  230  Welding Current (A)  30~60 
    Rating:
    100%
    from S$47.99
    Min. 2 days
  35. Coated arc welding rod S-16
    Nippon STeel Welding & Engineering (Former Nippon Steel & Sumikin Welding) Coated arc welding rod S-16
    A low hydrogen welding rod with excellent crack resistance, mechanical properties and X-ray performance of weld metal. The stable arc and wide working current range make it ideal for all-position welding, and it is a representative brand of low-hydrogen welding rods. The amount of spatter and the... Read More
    JIS Standard  Z3211 E4316U (old Z3211 D4316)  Coating  Low hydrogen type  AWS Standard  A5.1 E7016 applicable 
    from S$229.90
    Min. 2 days
  36. Coated arc welding rod (for mild steel) LC-08
    NIKKO YOZAI MFG Coated arc welding rod (for mild steel) LC-08
    LC-08 is a lime titanian welding rod developed in 2008. Focusing on re-arcability, the slag has good peelability and a beautiful bead appearance can be obtained. Due to its outstanding re-arcability, work efficiency can be improved in intermittent welding, temporary welding, and fillet welding. F... Read More
    Insulation  Lime titania type  Color  Rod end / Green  JIS Standard  Z3211 E4303 
    from S$29.99
    Min. 2 days
  37. Star Road G3 galvanized bar
    STAR ELECTRIC MANUFACTURING (SUZUKID) Star Road G3 galvanized bar
    A special arc welding rod developed for welding hot-dip galvanized steel materials. Even if the plating film is welded as it is without peeling off, it is designed to have excellent pore resistance to pits and blow holes, so the man-hours for repairing due to welding defects can be reduced.
    Type  For galvanized welding 
    from S$17.99
    Min. 3 days
  38. Welding rod for mild steel to 550 MPa class steel
    Kobelco (Kobe Steel) Welding rod for mild steel to 550 MPa class steel
    It is a vertical downward bar. High current can be used, and efficiency is improved by natural slag peeling. It has excellent mechanical properties, crack resistance, and bead appearance. * The current range is for reference only and does not compensate for the technology.
    JIS Standard  Z3211 E4948 (former Z3212 D5016)  AWS Standard  A5.1 E7048 applicable 
    from S$57.99
    Min. 2 days
  39. Welding rod LB-52T
    Kobelco (Kobe Steel) Welding rod LB-52T
    Even a welding machine equipped with an electric shock prevention device shows good re-arcability by just touching the base metal lightly. Good welding is possible in all postures including vertical and downward movement. It is a welding rod that is resistant to cracking because it is a coating m... Read More
    Absorption Energy (J)  180  Elongation (%)  30  Withstand Pressure (MPa)  430  Tensile Strength (MPa)  520  AWS Standard  A5.1 E7048  JIS Standard  Z3211 E4948 
    from S$49.99
    Min. 2 days
  40. TIG rod for mild steel
    STAR ELECTRIC MANUFACTURING (SUZUKID) TIG rod for mild steel
    Consumables for SIM-180 / SIM-230.
    from S$17.99
    Min. 13 days
View : Grid List
Filter

Items 1 - 40 of 157

Set Ascending Direction