All Category

Cylinder Stands

A cylinder stand is a welding product used to set up a gas cylinder used for welding. It is used to prevent accidents due to the fall of the gas cylinder during work as well as other times. It may be used not only indoors but also outdoors. There are many things that are fixed with a chain after setting up a cylinder on the stand. Depending on the application, there are ones with five to one, acetylene gas cylinders, and hand car type with wheels on the back.
View : Grid List
Filter

21 Item(s)

Set Ascending Direction
  1. Warning sign for container
    ITO (Former Ito Kohki) Warning sign for container
    As a warning sign for LP gas container storage
    Dimensions, Width x Length (mm)  281×201 
    from S$13.99
    Min. 2 days
  2. For 10kgLP gas container
    ITO (Former Ito Kohki) For 10kgLP gas container
    This is to protect the LP gas container (10 kg) from tipping over. Preventing the LP gas container from tipping over
    Inner Diameter (Φmm)  330  Dimension h (mm)  310  Mass (kg)  Applicable cylinder  LP gas 10kg 
    from S$259.90
    Min. 2 days
  3. Silent CS belt
    ITO (Former Ito Kohki) Silent CS belt
    A belt for fixing LP gas containers. Compared to iron cylinder chains, it does not rust and suppresses unpleasant noises such as "rattle" and "khan" when replacing containers. Preventing the LP gas container from tipping over
    Material  Belt: Polyester resin, Hook: Resin  Belt length (cm)  50~185 
    Rating:
    100%
    from S$7.99
    Min. 2 days
  4. For bulk  Warning sign
    ITO (Former Ito Kohki) For bulk Warning sign
    As a warning sign for LP gas bulk storage tank
    Dimensions, Width x Length (mm)  281×201 
    from S$14.99
    Min. 2 days
  5. Indoor use "No fall"
    ITO (Former Ito Kohki) Indoor use "No fall"
    This is to protect the LP gas container (for indoor use) from tipping over. Preventing the LP gas container from tipping over
    Mass (kg)  8.5  Inner Diameter (Φmm)  Base: 310, Ring: 330  Dimension h (mm)  318.5  Applicable cylinder  LP gas indoor use 
    from S$289.90
    Min. 6 days
  6. Silent CS belt One side fixed type
    ITO (Former Ito Kohki) Silent CS belt One side fixed type
    A belt for fixing LP gas containers. Compared to iron cylinder chains, it does not rust and suppresses unpleasant noises such as "rattle" and "khan" when replacing containers. Preventing the LP gas container from tipping over
    Material  Belt: Polyester resin, Hook: Resin  Belt length (cm)  50~185 
    from S$7.49
    Min. 6 days
  7. For 20kgLP gas container
    ITO (Former Ito Kohki) For 20kgLP gas container
    This is to protect the LP gas container (20 kg) from tipping over. Preventing the LP gas container from tipping over
    Inner Diameter (Φmm)  330  Applicable cylinder  LP gas 20kg  Mass (kg)  10  Dimension h (mm)  610 
    from S$269.90
    Min. 6 days
  8. "No toppling" 8kgLP gas container ring
    ITO (Former Ito Kohki) "No toppling" 8kgLP gas container ring
    By covering the 10kg container "no tipping over" with the 8kg container ring, it can also be used for 8kg LP gas containers! "No lighting" additional option * Cannot be used with this product alone.
    from S$119.90
    Min. 6 days
  9. NRC container stand
    ESCO NRC container stand
    When filling liquid while weighing, you can easily perform operations such as weighing and valve operation without the cylinder becoming glaring.
    Dimension (mm)  Diameter 250 × 150  Esco Part No.  EA994RS  Material  Steel 
    from S$53.99
    Min. 6 days
  10. "No overturn" anchor mounting bracket for 10kg and 20kg LP gas containers (1 set of 2)
    ITO (Former Ito Kohki) "No overturn" anchor mounting bracket for 10kg and 20kg LP gas containers (1 set of 2)
    Allows "no fall" anchor fixing outdoors. "No lighting" additional option * Cannot be used with this product alone. * Anchor bolts are not included. * Please use M10 bolts.
    Hole Diameter (Φmm)  12 
    from S$45.99
    Min. 6 days
  11. 50kgLP gas container "no overturn" connecting tube set
    ITO (Former Ito Kohki) 50kgLP gas container "no overturn" connecting tube set
    "No tipping over" (for 50kg container) Improved stability when installed in parallel! "No lighting" additional option * Cannot be used with this product alone.
    from S$119.90
    Min. 6 days
  12. For general high-pressure gas containers
    ITO (Former Ito Kohki) For general high-pressure gas containers
    This is to protect the general high pressure gas container from tipping over. Preventing general high-pressure gas containers from tipping over
    Inner Diameter (Φmm)  240  Applicable cylinder  General high pressure gas  Dimension h (mm)  1020  Mass (kg)  18.5 
    from S$639.90
    Min. 6 days
  13. Only "no overturn" pipe for 10kg LP gas container
    ITO (Former Ito Kohki) Only "no overturn" pipe for 10kg LP gas container
    "No fall" 10kg container pipe only sold. In addition to "no tipping" for 20kg LP gas container, it also supports 10kg container! "No lighting" additional option * Cannot be used with this product alone.
    from S$29.99
    Min. 6 days
  14. "No overturn" connecting pipe set for 10kg and 20kg LP gas containers
    ITO (Former Ito Kohki) "No overturn" connecting pipe set for 10kg and 20kg LP gas containers
    "No tipping over" (for 10kg and 20kg containers) Improved stability when installed in parallel! "No lighting" additional option * Cannot be used with this product alone.
    from S$119.90
    Min. 6 days
  15. TIG Welding Torch Stand Holder Ready Rest
    SHT TIG Welding Torch Stand Holder Ready Rest
    There is an angled torch stopper, which makes it difficult for the torch to fall. A magnet is attached to the pedestal. As a stand holder for TIG welding torches
    Width (mm)  20  Attracting Force (N)  294N  Diameter (Φmm)  90 
    from S$33.99
    Min. 2 days
  16. 50kg LP gas container "no overturn"
    ITO (Former Ito Kohki) 50kg LP gas container "no overturn"
    This is to protect the LP gas container (50 kg) from tipping over. Preventing the LP gas container from tipping over
    Applicable cylinder  LP gas 50kg  Dimension h (mm)  1020  Inner Diameter (Φmm)  380  Mass (kg)  20 
    from S$589.90
    Min. 6 days
  17. "No overturn" connecting pipe set for general high pressure gas containers
    ITO (Former Ito Kohki) "No overturn" connecting pipe set for general high pressure gas containers
    "No tipping over" (for general high-pressure gas containers) Improved stability when installed in parallel! "No lighting" additional option * Cannot be used with this product alone.
    from S$119.90
    Min. 6 days
  18. MIG Welding Torch Stand Holder Ready Rest
    SHT MIG Welding Torch Stand Holder Ready Rest
    There is an angled torch stopper, which makes it difficult for the torch to fall. With a wire holder with adjustable angle, you can hold the wire. Comes with a pliers plate and a pot for anti-spattering agent. A magnet is attached to the pedestal. As a stand holder for MIG welding torch
    Attracting Force (N)  294N 
    from S$42.99
    Min. 2 days
  19. Only "no overturn" pipe for 20kgLP gas container
    ITO (Former Ito Kohki) Only "no overturn" pipe for 20kgLP gas container
    "No fall" 20kg container pipe only sold. In addition to "no tipping" for 10kg LP gas container, it also supports 20kg container! "No lighting" additional option * Cannot be used with this product alone.
    from S$38.99
    Min. 6 days
  20. Anchor bolt and grounding rod set
    ITO (Former Ito Kohki) Anchor bolt and grounding rod set
    Anchor bolt / ground rod set for bulk storage tanks made by I / T / O. Fixing the foundation of the bulk storage tank and electrical grounding with the ground
    from S$119.90
    Min. 6 days
  21. Safety belt
    Home Heightec Safety belt
    A belt for fixing LP gas containers. Compared to iron cylinder chains, it does not rust and suppresses unpleasant noises such as "rattle" and "khan" when replacing containers. Preventing the LP gas container from tipping over
    Belt length (cm)  50~185  Material  Belt: Polyester resin, Hook: Iron 
    Discontinued
View : Grid List
Filter

21 Item(s)

Set Ascending Direction