All Category

Welding Guide Rulers

View : Grid List
Filter

24 Item(s)

Set Ascending Direction
  1. Guide scale
    TECHNOPLAN Guide scale
    Since it uses heat-resistant cooperative permanent magnets, it can be expected to improve workability with a firm holding force. It is a special tool for fusing by moving while keeping the height of the crater constant in gas welding.
    Width (mm)  83  Length (mm)  46 
    Rating:
    80%
    from S$119.90
    Min. 2 days
  2. Simple cutting guide (for cutting and cutting)
    NISSAN TANAKA Simple cutting guide (for cutting and cutting)
    Applicable Pipes  (Blow-pipe) small and medium size cutter 
    from S$119.90
    Min. 2 days
  3. Simple cutting guide (for cutting A and B)
    NISSAN TANAKA Simple cutting guide (for cutting A and B)
    A cutting guide that allows you to use your own cutting device as it is. The structure that does not require electricity does not need to worry about failure. For simple straight or arc cutting. * Medium-sized cutting device and No. A cutting device are not included.
    Applicable Pipes  (Blowpipe) A-B cutting machine 
    from S$139.90
    Min. 2 days
  4. Welding guide ruler
    Shinwa Rules Welding guide ruler
    Insulation coating is applied to the surface of the ruler. Since it is difficult to energize, it is difficult to spark even if the welding machine touches it. The main body is made of aluminum and is light and easy to handle. The angle can be changed freely, the angle is easy to match, and the sl... Read More
    Main Unit Dimensions (mm)  1010 x 550 x 54 (at 90 °)  Right Angle Accuracy  ± 1 / 1000rad (± 1.0mm at 1000mm)  Operating Temperature Range (℃)  -20~70 
    from S$339.90
    Min. 2 days
  5. KT-270 with 726mm rail
    NISSAN TANAKA KT-270 with 726mm rail
    A cutting guide that allows you to use your own cutting device as it is. Since a constant speed can be obtained, cutting can be performed with the same accuracy as automatic cutting. Groove cutting can be done in the same way. The structure that does not require electricity does not need to worry... Read More
    Type  KT-270  Offset Angle (°)  (Bevel cutting) 0-45  Trusco Part No.  306-1493  Effective Length (mm)  (Guide rail) 636  Mass (kg)  Length (mm)  (Guide rail) 726  Cutting Speed (mm/min)  300~700 
    from S$869.90
    Min. 2 days
  6. Guide scale
    KANETEC Guide scale
    High-performance permanent magnets firmly fix the scale. The GS-1 can adjust the scale up and down according to the height of the crater. The GS-2 can be easily attached and detached because the suction force can be turned ON / OFF by operating the lever. A dedicated guide device for moving while... Read More
    from S$299.90
    Min. 2 days
  7. Tip 60A  CUT Master 52/82/102
    ASADA Tip 60A CUT Master 52/82/102
    Current (A)  60  Suitable Model  CUT Master 52, 82, 102 
    from S$109.90
    Min. 5 days
  8. Parts Welding guide ruler
    Shinwa Rules Parts Welding guide ruler
    special parts * Do not use for any other purpose.
    from S$5.89
    Min. 3 days
  9. Gas Distributor  For SL40
    ASADA Gas Distributor For SL40
    Suitable Model  CUT Master 42 
    from S$94.99
    Min. 5 days
  10. Tip  40A  For SL40
    ASADA Tip 40A For SL40
    Current (A)  40  Suitable Model  CUT Master 42 (for non-contact use) 
    from S$79.99
    Min. 5 days
  11. Gas distributor for 35P ・ PC
    ASADA Gas distributor for 35P ・ PC
    Cutting guide (PZ960) Standard accessory For torch operation without blurring !! For accurate cutting of straight lines and perfect circles. Can also be used for stainless steel plates.
    Suitable Model  35P・PC  Trusco Part No.  851-2949 
    from S$47.99
    Min. 6 days
  12. Tip  40A  SL40 for contact
    ASADA Tip 40A SL40 for contact
    Current (A)  40  Suitable Model  CUT Master 42 
    from S$79.99
    Min. 5 days
  13. Chip 35P / PC
    ASADA Chip 35P / PC
    Cutting guide (PZ960) Standard accessory For torch operation without blurring !! For accurate cutting of straight lines and perfect circles. Can also be used for stainless steel plates.
    Suitable Model  35P・PC 
    from S$159.90
    Min. 6 days
  14. Gas Distributor  15 PC  For ECO
    ASADA Gas Distributor 15 PC For ECO
    Cutting guide (PZ902) Standard accessory For torch operation without blurring !! For accurate cutting of straight lines and perfect circles. Can also be used for stainless steel plates.
    Suitable Model  15PC ECO 
    from S$79.99
    Min. 6 days
  15. Chip for 15PC ECO
    ASADA Chip for 15PC ECO
    Cutting guide (PZ902) Standard accessory For torch operation without blurring !! For accurate cutting of straight lines and perfect circles. Can also be used for stainless steel plates.
    Suitable Model  15PC ECO 
    from S$149.90
    Min. 6 days
  16. Tip 100A  For CUT Master 102
    ASADA Tip 100A For CUT Master 102
    Current (A)  100  Suitable Model  CUT Master 102 
    from S$21.99
    Min. 4 days
  17. Chip 80A for CUT Master 82/102
    ASADA Chip 80A for CUT Master 82/102
    Suitable Model  CUT Master 82, 102  Current (A)  80 
    from S$109.90
    Min. 5 days
  18. Tip  20A  SL40 for contact
    ASADA Tip 20A SL40 for contact
    Current (A)  20  Suitable Model  CUT Master 42 
    from S$79.99
    Min. 5 days
  19. For gas distributor CUT Master
    ASADA For gas distributor CUT Master
    Suitable Model  CUT Master 38, 39, 52, 82, 102 
    from S$129.90
    Min. 5 days
  20. Circular and straight-line induction wheel
    SAKAGUCHI Circular and straight-line induction wheel
    Minimum Cutting Radius (mm)  65  Overall Length (mm)  550  maximum cutting radius (mm)  500  Mass (g)  620 
    Discontinued
  21. Straight rail 500L (with fixed magnet)
    KOIKE SANSO KOGYO Straight rail 500L (with fixed magnet)
    Suitable for  Handy Auto II 
    Discontinued
  22. Large circle cutting compass (Φ120 ~ Φ500)
    KOIKE SANSO KOGYO Large circle cutting compass (Φ120 ~ Φ500)
    Size  Φ120~Φ500  Suitable for  Handy Auto II 
    Discontinued
  23. Small circle cutting compass (Φ30 ~ Φ200)
    KOIKE SANSO KOGYO Small circle cutting compass (Φ30 ~ Φ200)
    Suitable for  Handy Auto II  Size  Φ30~Φ200 
    Discontinued
  24. Tip 30A  For CUT master
    ASADA Tip 30A For CUT master
    Current (A)  30  Suitable Model  CUT Master 38, 39, 52, 82, 102 
    Discontinued
View : Grid List
Filter

24 Item(s)

Set Ascending Direction