All Category

Welding Wire for Hard Facing

View : Grid List
Filter

Items 1 - 40 of 41

Set Ascending Direction
  1. Flux-cored wire for hardfacing
    Kobelco (Kobe Steel) Flux-cored wire for hardfacing
    Flux-filled wire for MAG welding used for hard overlay welding. A slag type flux-cored wire with excellent arc stability and extremely small amount of spatter. The slag is naturally peeled off, making it easy to remove the slag.
    Specification  Shield gas: CO  Wire Type  With flux  JIS Standard  Z3326 YF3B-C-600 
    from S$479.90
    Min. 13 days
  2. Flux-cored wire for hardfacing
    Kobelco (Kobe Steel) Flux-cored wire for hardfacing
    Tempering softening resistance is large and stable hardness can be obtained. For earth and sand wear resistance and metal wear resistance.
    Wire Type  With flux  JIS Standard  Z3326 YF3B-C-600 
    Rating:
    80%
    from S$449.90
    Min. 13 days
  3. Flux-cored wire for hardfacing
    Kobelco (Kobe Steel) Flux-cored wire for hardfacing
    Machining is possible with high speed. Suitable for metal-to-metal wear, for underlaying, shape restoration, etc.
    Wire Type  With flux  JIS Standard  Z3326 YF2A-C-350 
    from S$299.90
    Min. 13 days
  4. Flux-cored wire for hardfacing
    Kobelco (Kobe Steel) Flux-cored wire for hardfacing
    Flux-filled wire for MAG welding used for hard overlay welding. A slag type flux-cored wire with excellent arc stability and extremely small amount of spatter. The slag is naturally peeled off, making it easy to remove the slag.
    Specification  Shield gas: CO  Wire Type  With flux  JIS Standard  Z3326 YF3B-C-800 
    Rating:
    100%
    from S$579.90
    Min. 2 days
  5. Flux-cored wire for hardfacing
    Kobelco (Kobe Steel) Flux-cored wire for hardfacing
    Machining is possible with high speed. Can be hardened after processing. For parts that are subject to metal-to-metal wear and slight earth and sand wear.
    Wire Type  With flux  JIS Standard  Z3326 YF3B-C-450 
    Rating:
    100%
    from S$349.90
    Min. 13 days
  6. Flux-cored wire for hardfacing
    Kobelco (Kobe Steel) Flux-cored wire for hardfacing
    Machining is difficult. If possible, perform heat treatment after welding at about 600 ° C. Overlay welding of cutter knives, casings, etc., sediment wear.
    Wire Type  With flux  JIS Standard  Z3326 YF2A-C-250 
    Rating:
    40%
    from S$259.90
    Min. 13 days
  7. Mag-welded flux-cored wire MT-FZ30 for hardfacing
    TOKUDEN Mag-welded flux-cored wire MT-FZ30 for hardfacing
    It is a high-chromium cast iron type that produces a large amount of chromium carbide in the weld metal and is ideal for erosion and sediment wear. Welded metal exhibits excellent wear resistance, and also has excellent wear resistance even in corrosion and high temperature atmospheres. Overlay w... Read More
    Suitable Gas  CO2 20~25(L/min)  Wire Type  With flux 
    from S$1,299.00
    Min. 10 days
  8. Mag welding flux-cored wire for hardfacing MT-HM
    TOKUDEN Mag welding flux-cored wire for hardfacing MT-HM
    A welding material for 13Mn steel, the weld metal has an austenite structure and is highly work-hardening. Welded metal has high toughness, low hardness as it is welded, and the surface hardens to high hardness when it receives a strong impact from the outside. Overlay welding of crusher, bucket ... Read More
    Suitable Gas  CO2 20~25(L/min)  Wire Type  With flux 
    from S$589.90
    Min. 10 days
  9. MIG welding wire for hardfacing M-CRM-2
    TOKUDEN MIG welding wire for hardfacing M-CRM-2
    Overlay welding and dissimilar material welding of high manganese steel parts, hot shear, etc.
    Wire Rope Diameter (Φmm)  1.2  Suitable Gas  Ar+2%O2  Wire Type  Solid 
    from S$679.90
    Min. 10 days
  10. Mag welding flux-cored wire for hardfacing MT-CRM-2
    TOKUDEN Mag welding flux-cored wire for hardfacing MT-CRM-2
    It is a welded metal component of 16Cr-16Mn, has an austenite structure, and is rich in toughness and work hardening. Compared to solid wire, the arc stability is very good, there is less spatter, and the slag is evenly applied, resulting in a beautiful bead. Since the weld metal has excellent st... Read More
    Suitable Gas  CO2 20~25(L/min)  Wire Type  With flux  JIS Standard  Z3326 YFME-C-250 
    from S$859.90
    Min. 10 days
  11. Mag-welded flux-cored wire for hardfacing MT-CXRH
    TOKUDEN Mag-welded flux-cored wire for hardfacing MT-CXRH
    Welded metal of about HV570 can be obtained as it is welded. The weld metal is 13Cr martensitic steel, which has excellent wear resistance as well as corrosion resistance and oxidation resistance. Workability is good, and a beautiful bead with no defects can be obtained. Overlay welding of rolls,... Read More
    Wire Rope Diameter (Φmm)  1.6  Current Range (A)  250~350  Suitable Gas  CO2 20~25(L/min)  Wire Type  With flux  JIS Standard  Z3326 YF4B-C-600 
    from S$1,099.00
    Min. 10 days
  12. MIG welding flux-cored wire MT-FZ1000 for hardfacing
    TOKUDEN MIG welding flux-cored wire MT-FZ1000 for hardfacing
    It is a tungsten carbide system and produces tungsten carbide in the weld metal, making it ideal for erosion and sediment wear. Welded metal exhibits excellent wear resistance, and also has excellent wear resistance even in corrosion and high temperature atmospheres. Overlay of blowers, sandblast... Read More
    Wire Rope Diameter (Φmm)  1.6  Current Range (A)  300~350  Suitable Gas  Ar 20~25(L/min)  Wire Type  With flux 
    from S$2,699.00
    Min. 10 days
  13. Submerged arc welding flux cored wire for hardfacing UT-2RMO-4
    TOKUDEN Submerged arc welding flux cored wire for hardfacing UT-2RMO-4
    A flux-cored wire for submerged arc welding that obtains a weld metal of 13Cr-4Ni-1Mo. The weld metal is a structure containing fine austenite in martensite, and has excellent toughness and crack resistance compared to conventional 13Cr steel. Welded metal has excellent mechanical properties and ... Read More
    Operating Voltage Range (V)  26~30  Wire Rope Diameter (Φmm)  3.2  Current Range (A)  300~450  Speed  30~60cm/min  Wire Type  With flux 
    from S$889.90
    Min. 10 days
  14. MIG welding flux cored wire for hardfacing MT-STL-12
    TOKUDEN MIG welding flux cored wire for hardfacing MT-STL-12
    Co-Cr-W alloy, so-called stellite, which has high hardness. It is inferior in wear resistance to MT-STL-1, but has excellent toughness. Overlay of parts that require corrosion resistance, heat resistance, and wear resistance, such as high-pressure pump shaft sleeves, textile industry cutter cutti... Read More
    Wire Rope Diameter (Φmm)  1.6  Wire Type  With flux 
    from S$6,699.00
    Min. 10 days
  15. Mag-welded flux-cored wire MT-FZ90 for hardfacing
    TOKUDEN Mag-welded flux-cored wire MT-FZ90 for hardfacing
    It is a high-chromium cast iron system that produces a large amount of chromium carbide in the weld metal and at the same time produces composite carbides of Mo, W, Nb, V, etc., making it ideal for erosion and sediment wear. Welded metal exhibits excellent wear resistance, and also has excellent ... Read More
    Wire Rope Diameter (Φmm)  1.6  Current Range (A)  230~300  Suitable Gas  CO2 20~25(L/min)  Wire Type  With flux 
    from S$1,899.00
    Min. 10 days
  16. Submerged arc welding flux cored wire for hardfacing UT-350V
    TOKUDEN Submerged arc welding flux cored wire for hardfacing UT-350V
    Flux-cored wire for submerged arc welding with good arc stability and beautiful beads. This wire is particularly excellent in heat check resistance, hardness, and toughness, and is suitable for overlaying parts that are subject to intermetal wear and repeated thermal stress at high temperatures. ... Read More
    Operating Voltage Range (V)  26~30  Wire Rope Diameter (Φmm)  3.2  Current Range (A)  300~450  Speed  30~60cm/min  Wire Type  With flux 
    from S$449.90
    Min. 10 days
  17. Mag welding flux cored wire for hardfacing MT-CRH
    TOKUDEN Mag welding flux cored wire for hardfacing MT-CRH
    It is a high-chromium cast iron type that produces chromium carbide in the weld metal, making it ideal for erosion wear. Welded metal exhibits excellent wear resistance, as well as excellent corrosion resistance and heat resistance. Overlay of Exostar, Sandblast, Pump Casing, Impeller, Mixer Blad... Read More
    Suitable Gas  CO2 20~25(L/min)  Wire Type  With flux  JIS Standard  Z3326 YFCrA-C-700 
    from S$799.90
    Min. 10 days
  18. Mag-welded flux-cored wire MT-700 for hardfacing
    TOKUDEN Mag-welded flux-cored wire MT-700 for hardfacing
    Welded metal with a high hardness of about HV700 can be obtained as it is welded. The arc stability is very good, there is little spatter, and a smooth and beautiful bead is obtained. It is not easily affected by wind, and good welding results can be obtained even outdoors. Overlay welding of rol... Read More
    Suitable Gas  CO2 20~25(L/min)  Wire Type  With flux  JIS Standard  Z3326 YF3B-C-700 
    from S$679.90
    Min. 10 days
  19. MIG welding flux cored wire for hardfacing MT-CXA-40D
    TOKUDEN MIG welding flux cored wire for hardfacing MT-CXA-40D
    A flux-cored wire for MIG welding designed so that the weld metal component is 13Cr-4Ni by performing one-layer overlay welding on carbon steel. Since it is a flux-cored wire, the arc is stable, there is almost no spatter, the slag is easily peeled off, and the bead appearance is very beautiful. ... Read More
    Wire Rope Diameter (Φmm)  1.6  Current Range (A)  250~350  Suitable Gas  Ar 20~25(L/min)  Wire Type  With flux 
    from S$1,199.00
    Min. 10 days
  20. Submerged arc welding flux cored wire for hardfacing UT-450V
    TOKUDEN Submerged arc welding flux cored wire for hardfacing UT-450V
    Flux-cored wire for submerged arc welding with good arc stability and beautiful beads. The structure of the weld metal is a mixed structure of sorbite and martensite, which is particularly excellent in heat check resistance. Overlay welding of various rolls and rollers and parts that are subject ... Read More
    Operating Voltage Range (V)  26~30  Wire Rope Diameter (Φmm)  3.2  Current Range (A)  300~450  Speed  30~60cm/min  Wire Type  With flux 
    from S$479.90
    Min. 10 days
  21. Mug welding flux-cored wire MT-350 for hardfacing
    TOKUDEN Mug welding flux-cored wire MT-350 for hardfacing
    Welded metal of about HV350 can be obtained as it is welded. The arc stability is very good compared to solid wire, there is less spatter, and the slag is evenly applied, resulting in a beautiful bead. It is not easily affected by wind, and good welding results can be obtained even outdoors. Over... Read More
    Suitable Gas  CO2 20~25(L/min)  JIS Standard  JIS Z3326 YF2A-C-350  Wire Type  With flux 
    from S$499.90
    Min. 7 days
  22. Mag-welded flux-cored wire MT-FZ10 for hardfacing
    TOKUDEN Mag-welded flux-cored wire MT-FZ10 for hardfacing
    It is a high-chromium cast iron type that produces a large amount of chromium carbide in the weld metal and is ideal for erosion and sediment wear. Welded metal exhibits excellent wear resistance, and also has excellent wear resistance even in corrosion and high temperature atmospheres. Overlay w... Read More
    Suitable Gas  CO2 20~25(L/min)  Wire Type  With flux 
    from S$879.90
    Min. 10 days
  23. Mag-welded flux-cored wire MT-CR50 for hardfacing
    TOKUDEN Mag-welded flux-cored wire MT-CR50 for hardfacing
    Welded metal of about HV530 can be obtained as it is welded. The weld metal is 13Cr martensitic steel, which has excellent wear resistance as well as corrosion resistance and oxidation resistance. Workability is good, and a beautiful bead with no defects can be obtained. Overlay welding of rolls,... Read More
    Wire Rope Diameter (Φmm)  1.6  Current Range (A)  250~350  Suitable Gas  CO2 20~25(L/min)  Wire Type  With flux  JIS Standard  Z3326 YF4B-C-500 
    from S$769.90
    Min. 10 days
  24. Mag welding flux cored wire for hardfacing MT-HVC
    TOKUDEN Mag welding flux cored wire for hardfacing MT-HVC
    Welded metal of about HV780 can be obtained as it is welded. Although the weld metal lacks toughness, it exhibits excellent wear resistance against those that are subject to severe earth and sand wear. Overlay welding of pump casings, impellers, buckets, screw conveyors, exoticers, blowers, etc.
    Suitable Gas  CO2 20~25(L/min)  Wire Type  With flux  JIS Standard  Z3326 YF3B-C-800 
    from S$789.90
    Min. 10 days
  25. MIG welding flux cored wire for hardfacing MT-STL-6
    TOKUDEN MIG welding flux cored wire for hardfacing MT-STL-6
    It is a Co-Cr-W alloy and is the most representative alloy among so-called stellite alloys. It has high toughness in hot and cold and is widely used. Overlay of parts that require corrosion resistance, heat resistance, and wear resistance, such as high-temperature and high-pressure valve seats, c... Read More
    Wire Rope Diameter (Φmm)  1.6  Wire Type  With flux 
    from S$6,799.00
    Min. 10 days
  26. Mag welding flux cored wire for hardfacing MT-250
    TOKUDEN Mag welding flux cored wire for hardfacing MT-250
    Welded metal of about HV250 can be obtained as it is welded. The arc stability is very good compared to solid wire, there is less spatter, and the slag is evenly applied, resulting in a beautiful bead. It is not easily affected by wind, and good welding results can be obtained even outdoors. Over... Read More
    Suitable Gas  CO2 20~25(L/min)  Wire Type  With flux  JIS Standard  Z3326 YF2A-C-250 
    from S$459.90
    Min. 10 days
  27. MIG welding wire for hardfacing M-SA-45
    TOKUDEN MIG welding wire for hardfacing M-SA-45
    Parts that require corrosion resistance and heat resistance, such as high temperature valves, forging molds, rollers, blowers, etc.
    Wire Rope Diameter (Φmm)  1.6  Current Range (A)  280~320  Suitable Gas  Ar20~25(L/min)  Wire Type  Solid 
    from S$5,599.00
    Min. 10 days
  28. Mag-welded flux-cored wire MT-CRH-3 for hardfacing
    TOKUDEN Mag-welded flux-cored wire MT-CRH-3 for hardfacing
    It is a high-chromium cast iron system that produces a large amount of chromium carbide in the weld metal and at the same time produces composite carbides of Mo, W, Nb, and V, making it ideal for erosion and sediment wear. Welded metal exhibits excellent wear resistance, and also has excellent we... Read More
    Wire Rope Diameter (Φmm)  1.6  Current Range (A)  230~300  Suitable Gas  CO2 20~25(L/min)  Wire Type  With flux  JIS Standard  Z3326 YFCrA-C-800 
    from S$1,299.00
    Min. 10 days
  29. Mag-welded flux-cored wire MT-300 for hardfacing
    TOKUDEN Mag-welded flux-cored wire MT-300 for hardfacing
    Welded metal of about HV300 can be obtained as it is welded. The arc stability is very good compared to solid wire, there is less spatter, and the slag is evenly applied, resulting in a beautiful bead. It is not easily affected by wind, and good welding results can be obtained even outdoors. Over... Read More
    Suitable Gas  CO2 20~25(L/min)  Wire Type  With flux  JIS Standard  Z3326 YF2A-C-300 
    from S$479.90
    Min. 10 days
  30. MIG welding flux cored wire for hardfacing MT-CXA-40
    TOKUDEN MIG welding flux cored wire for hardfacing MT-CXA-40
    A flux-cored wire for MIG welding with a weld metal component of 13Cr-4Ni. Since it is a flux-cored wire, the arc is stable, there is almost no spatter, the slag is easily peeled off, and the bead appearance is very beautiful. Welded metal with excellent crack resistance, good workability such as... Read More
    Wire Rope Diameter (Φmm)  1.6  Current Range (A)  250~350  Suitable Gas  Ar 20~25(L/min)  Wire Type  With flux  JIS Standard  Z3326 YF4A-G-400 
    from S$999.00
    Min. 10 days
  31. Submerged arc welding flux cored wire for hardfacing UT-CXRH
    TOKUDEN Submerged arc welding flux cored wire for hardfacing UT-CXRH
    It is a flux-cored wire for submerged welding, and welded metal of about HV570 can be obtained as it is welded. The weld metal is 13Cr martensitic steel, which exhibits excellent wear resistance and also has excellent corrosion resistance, heat resistance, and oxidation resistance. Overlay weldin... Read More
    Operating Voltage Range (V)  26~30  Wire Rope Diameter (Φmm)  3.2  Current Range (A)  300~450  Speed  30~60cm/min  Wire Type  With flux 
    from S$859.90
    Min. 10 days
  32. MIG welding flux cored wire for hardfacing MT-CXA-41
    TOKUDEN MIG welding flux cored wire for hardfacing MT-CXA-41
    A flux-cored wire for MIG welding that obtains the weld metal component of 13Cr-4Ni-1Mo. Since it is a flux-cored wire, the arc is stable, there is almost no spatter, the slag is easily peeled off, and the bead appearance is very beautiful. In addition, good welds can be obtained, such as low blo... Read More
    Suitable Gas  Ar 20~25(L/min)  Wire Type  With flux 
    from S$969.90
    Min. 10 days
  33. Mag-welded flux-cored wire MT-450 for hardfacing
    TOKUDEN Mag-welded flux-cored wire MT-450 for hardfacing
    Welded metal of about HV450 can be obtained as it is welded. The arc stability is much better than solid wire, resulting in smooth and beautiful beads. It is not easily affected by wind, and good welding results can be obtained even outdoors. Overlay welding of rollers, shafts, wheels, idlers, sh... Read More
    Suitable Gas  CO2 20~25(L/min)  Wire Type  With flux  JIS Standard  Z3326 YF2A-C-450 
    from S$559.90
    Min. 13 days
  34. Submerged arc welding flux cored wire for hardfacing UT-250V
    TOKUDEN Submerged arc welding flux cored wire for hardfacing UT-250V
    Flux-cored wire for submerged arc welding with good arc stability and beautiful beads. This wire is particularly heat-check resistant and is suitable for overlaying parts that are subject to intermetal wear and repeated thermal stresses at high temperatures. It is especially suitable for underlay... Read More
    Operating Voltage Range (V)  26~30  Wire Rope Diameter (Φmm)  3.2  Current Range (A)  300~450  Speed  30~60cm/min  Wire Type  With flux 
    from S$449.90
    Min. 10 days
  35. Mag-welded flux-cored wire MT-600 for hardfacing
    TOKUDEN Mag-welded flux-cored wire MT-600 for hardfacing
    Welded metal with excellent crack resistance can be obtained as it is welded, despite its high hardness of about HV600. The arc stability is very good, there is little spatter, and a smooth and beautiful bead is obtained. It is not easily affected by wind, and good welding results can be obtained... Read More
    Suitable Gas  CO2 20~25(L/min)  Wire Type  With flux  JIS Standard  Z3326 YF3B-C-600 
    from S$649.90
    Min. 10 days
  36. Mag-welded flux-cored wire MT-CXA-41C for hardfacing
    TOKUDEN Mag-welded flux-cored wire MT-CXA-41C for hardfacing
    A flux-cored wire for CO2 welding that obtains the weld metal component of 13Cr-4Ni-1Mo. Since it is a flux-cored wire, the arc is stable and there is little spatter, the slag is easily peeled off, and the bead appearance is very beautiful. In addition, good welds can be obtained, such as low blo... Read More
    Suitable Gas  CO2 20~25(L/min)  Wire Type  With flux  JIS Standard  Z3326 YF4A-C-400 
    from S$889.90
    Min. 10 days
  37. MIG welding flux cored wire for hardfacing MT-CXA-21
    TOKUDEN MIG welding flux cored wire for hardfacing MT-CXA-21
    A flux-cored wire for MIG welding with a weld metal component of 13Cr-2Ni-1Mo. Since it is a flux-cored wire, the arc is stable, there is almost no spatter, the slag is easily peeled off, and the bead appearance is very beautiful. Welded metal with excellent crack resistance, good workability suc... Read More
    Wire Rope Diameter (Φmm)  1.6  Current Range (A)  250~350  Suitable Gas  Ar 20~25(L/min)  Wire Type  With flux  JIS Standard  Z3326 YF4A-G-400 
    from S$969.90
    Min. 10 days
  38. Mag-welded flux-cored wire MT-FZ20 for hardfacing
    TOKUDEN Mag-welded flux-cored wire MT-FZ20 for hardfacing
    It is a high-chromium cast iron type that produces a large amount of chromium carbide in the weld metal and is ideal for erosion and sediment wear. Welded metal exhibits excellent wear resistance, and also has excellent wear resistance even in corrosion and high temperature atmospheres. Overlay w... Read More
    Suitable Gas  CO2 20~25(L/min)  Wire Type  With flux 
    from S$1,099.00
    Min. 10 days
  39. MIG welding flux cored wire for hardfacing MT-STL-21
    TOKUDEN MIG welding flux cored wire for hardfacing MT-STL-21
    Co-Cr-Mo based wear resistant welding material. Welded metal has excellent wear resistance, heat resistance, corrosion resistance, and oxidation resistance, and is suitable for overlaying parts that are subject to corrosion at high temperatures accompanied by impact and wear between metals. It sh... Read More
    Wire Rope Diameter (Φmm)  1.6  Wire Type  With flux 
    from S$6,499.00
    Min. 10 days
  40. Submerged arc welding flux cored wire for hardfacing UT-350
    TOKUDEN Submerged arc welding flux cored wire for hardfacing UT-350
    Flux-cored wire for submerged arc welding with good arc stability and beautiful beads. The structure of the weld metal is sorbite, which has excellent crack resistance and impact resistance, and stable hardness can be obtained, so it is suitable for wear between metals and earth and sand wear tha... Read More
    Speed  30~60cm/min  Wire Type  With flux 
    from S$379.90
    Min. 10 days
View : Grid List
Filter

Items 1 - 40 of 41

Set Ascending Direction