All Category

Adhesives

Adhesives are used to bond substances together. By entering the material holes and the gaps between the materials and curing, there is an effect of bonding each other's materials. There are many types of adhesives, so consider the application, the nature of the substance, and the conditions after bonding. For example, those with good water resistance and coating properties are suitable for civil engineering and construction, and those with high strength and impact resistance are suitable for industrial use. Instant adhesives are suitable for vertical bonding and temporary fixing, and two-component mixed adhesives and elastic adhesives are characterized by strong impact resistance.
View : Grid List
Filter

Items 1 - 40 of 111

Set Ascending Direction
  1. 50mL dedicated gun
    Araldite 50mL dedicated gun
    A dedicated plastic gun that can discharge two-component types at the same time. Adhesion of various metals, plastics, stones, glass, and ceramics exclusively for 50mL. Insulation adhesion and casting of electrical and electronic parts.
    Height H x Length L x Width W (mm)  134×183×55  Mass (g)  290  Trusco Part No.  393-9502  Color  Gray / black  Adhesive Materials  Metal  Classification of the Hazardous  Non-dangerous goods  Main Works  Panel frame, parts, 3D shape 
    Rating:
    80%
    from S$149.90
    Min. 2 days
  2. UV light (Uni Solar)
    Unitec UV light (Uni Solar)
    It is a powerful repair material that cures when irradiated with ultraviolet light or sunlight and can be repaired in a short time. Hard is suitable for repairs such as FRP piping where pressure resistance is required, and soft is suitable for repairs that require flexibility such as PE (polyethy... Read More
    As ONE Part Number  1-9842-11  UV Wavelength (nm)  385  Dimension (mm)  80×230×125  Power Consumption  9W  Power Supply  AC100V、50/60Hz  Main Works  Parts 
    Rating:
    100%
    from S$149.90
    Min. 2 days
  3. NEZITTY 60H Type
    Toho Rubber NEZITTY 60H Type
    A compact, lightweight tube gun that does not get tired. The tube size can be used up to 60 mm. Either aluminum tube or laminated tube is OK. Since it can be operated with one hand, workability is good, and the extrusion amount can be adjusted with the lever. The amount of extrusion can be freely... Read More
    Outer Dimensions (mm)  140×90×60H  Trusco Part No.  322-9041  TGK Part No.  576-17-91-25  Main Works  Parts 
    Rating:
    70%
    from S$64.99
    Min. 2 days
  4. Nozzle for 3M metal clip
    3M Nozzle for 3M metal clip
    Mass (g)  2.4  Trusco Part No.  324-1831  Overall Length (mm)  68  Adhesive Materials  Metal  Main Works  Panel frame, parts, 3D shape 
    Rating:
    100%
    from S$46.99
    Min. 2 days
  5. Double cartridge gun
    CEMEDINE Double cartridge gun
    A container with a static mixer inserted at the tip of the container is attached to the double cartridge gun, and by pulling the trigger, the two liquids can be quantitatively mixed and discharged.
    Mass (g)  240  Trusco Part No.  364-6254  Classification of the Hazardous  Non-dangerous goods  Main Works  Panel frame, parts, 3D shape 
    Rating:
    55%
    from S$67.99
    Min. 2 days
  6. Araldite 50mL Mixer
    Araldite Araldite 50mL Mixer
    Overall Length (mm)  104  Mass (g)  Trusco Part No.  393-9511  Main Works  Panel frame, parts, 3D shape 
    Rating:
    80%
    from S$5.89
    Min. 2 days
  7. Hot bond stand
    goot (TAIYO ELECTRIC) Hot bond stand
    Stand for HB-25, 45 and B-30. Holds the hot bond firmly and you can work comfortably. Adjustable leg angle.
    Dimensions, Width W x Height H x Length L (mm)  (At the time of open leg) 130 × 75 × 140  Trusco Part No.  468-6853  Mass (g)  51.5  Height (mm)  75  Classification of the Hazardous  Non-dangerous goods  Main Works  Parts 
    Rating:
    97%
    from S$5.69
    Min. 2 days
  8. EPX applicator
    3M EPX applicator
    Trusco Part No.  218-7043  Suitable for  EPX adhesive applicator  Main Works  Panel frame, parts, 3D shape 
    Rating:
    100%
    from S$149.90
    Min. 2 days
  9. Nozzle for hot bonder PKP18E
    BOSCH Nozzle for hot bonder PKP18E
    Suitable Model  PKP18E  Main Works  Parts 
    from S$12.99
    Min. 2 days
  10. Replacement Nozzle for Two-component Rapid Cure Cyanoacrylate adhesive 3092
    Henkel Replacement Nozzle for Two-component Rapid Cure Cyanoacrylate adhesive 3092
    Capacity (g)  10  Mass (g)  26  Trusco Part No.  480-1261  Color  Orange  Main Works  Panel frame, parts, 3D shape 
    Rating:
    80%
    from S$12.99
    Min. 2 days
  11. Scotch-Weld Long mixing nozzle for 48.5mL
    3M Scotch-Weld Long mixing nozzle for 48.5mL
    Two-component mixed type adhesive applicator, EPX dedicated nozzle.
    Trusco Part No.  125-6630  Overall Length (mm)  147  Mass (g)  Suitable for  DP100CLE48ML、DP125CLE48ML、DP190GRA48ML  Adhesive Materials  Metal, soft PVC  Classification of the Hazardous  Non-dangerous goods  Main Works  Panel frame, parts, 3D shape 
    Rating:
    100%
    from S$78.99
    Min. 2 days
  12. LOCTITE Dual cartridge gun for 50mL
    Henkel LOCTITE Dual cartridge gun for 50mL
    A manual applicator that mixes and applies a two-component mixed type adhesive containing a 50 mL cartridge with a static mixer on the hull. It is not necessary to mix because it can be applied in a mixed state by pulling the lever. An applicator that can be easily replaced with a 50mL cartridge.... Read More
    Mass (g)  175  Trusco Part No.  332-6951  Specification  Dot coating / drop coating  Working viscosity range  High viscosity  Type  Manual manual type  Main Works  Panel frame, parts, 3D shape 
    Rating:
    100%
    from S$97.99
    Min. 2 days
  13. Loctite Hand Pump
    Henkel Loctite Hand Pump
    It can be attached directly to a container of 50 mL and 250 mL of anaerobic adhesive, and a fixed amount can be applied by pulling the lever, and the amount of application can be adjusted with the adjusting screw. Since it is attached directly to the container, liquid exchange is easy and easy to... Read More
    Coating amount  0.005~0.04ml  Mass (g)  125  Trusco Part No.  293-0692  Compatible Container  50mL・250mL  Working viscosity range  Low / medium  Driving System  Manual  Main Works  Parts  application pattern  Point / drop application 
    Rating:
    20%
    from S$149.90
    Min. 2 days
  14. Static mixer (nozzle)
    CEMEDINE Static mixer (nozzle)
    A container with a static mixer inserted at the tip of the container is attached to the double cartridge gun, and by pulling the trigger, the two liquids can be quantitatively mixed and discharged.
    Discharge Diameter (Φmm)  1.5  Mass (g)  100  Trusco Part No.  364-6262  Type  50g double cartridge mixer  Length (mm)  55.7  Specification  7-stage element  Classification of the Hazardous  Non-dangerous goods  Main Works  Panel frame, parts, 3D shape 
    Rating:
    100%
    from S$77.99
    Min. 2 days
  15. 2000 epoxy nozzle
    Araldite 2000 epoxy nozzle
    There is no need for "weighing and mixing" that is typical of 2-component room temperature curing epoxy adhesives. Zero "blending mistakes" and "mixing mistakes" greatly reduce the problem of poor adhesion. It is possible to mix and fill with "bubble-free",... Read More
    Mass (g)  Overall Length (mm)  160  Trusco Part No.  384-8507  Adhesive Materials  Metal  Classification of the Hazardous  Non-dangerous goods  Main Works  Panel frame, parts, 3D shape  Color  White 
    from S$6.49
    Min. 2 days
  16. Mix Nozzle
    Henkel Mix Nozzle
    Main Works  Panel frame, parts, 3D shape 
    from S$25.99
    Min. 2 days
  17. Mix nozzle
    Devcon Mix nozzle
    The two liquids can be mixed and discharged with the screw nozzle.
    Classification of the Hazardous  Non-dangerous goods  Main Works  Panel frame, parts, 3D shape 
    Rating:
    100%
    from S$45.99
    Min. 2 days
  18. 3M hot melt adhesive related parts Long nozzle
    3M 3M hot melt adhesive related parts Long nozzle
    Long nozzle for applying to remote locations with a 3M hot melt gun * A separate valve assembly kit is required to install the AE2.
    Classification of the Hazardous  Non-dangerous goods  Main Works  Parts 
    from S$38.99
    Min. 2 days
  19. Nozzle for Mark 5 gun
    Devcon Nozzle for Mark 5 gun
    Mark 5 gun dedicated (sold separately) nozzle. Devcon 1-Minute Epoxy, 5-Minute Epoxy, 5 Minute Epoxy Dedicated Discharge Nozzle Part No .: 14277, 14270, 14265 Dedicated Nozzle Mark 5 Gun Dedicated Nozzle (Part No .: 217010)
    Mass (g)  40  Overall Length (mm)  80  Code of Suitable Cartridge  DV14265、DV14270、DV14277  Size  Classification of the Hazardous  Non-dangerous goods  Main Works  Panel frame, parts, 3D shape 
    from S$45.99
    Min. 2 days
  20. Mark 5 gun for 50ml cartridge
    Devcon Mark 5 gun for 50ml cartridge
    Two-component adhesive can be easily discharged * A dedicated mix nozzle is required. * Dedicated nozzle part number: 217015 (S size), 217014 (M size), 217013 (L size)
    Height (mm)  160  Mass (g)  255  Length (mm)  400  Width (mm)  60  Classification of the Hazardous  Non-dangerous goods  Main Works  Panel frame, parts, 3D shape 
    from S$279.90
    Min. 2 days
  21. 2000 Epoxy Guns
    Araldite 2000 Epoxy Guns
    A dedicated metal gun that can discharge two-component types at the same time. Corresponds to a mixing ratio of 1: 1 Adhesion of various metals, plastics, stones, glass, and ceramics. Insulation adhesion and casting of electrical and electronic parts. * Cannot be used for 2014-1 and 2014-1-200
    Adhesive Materials  Metal  Main Works  Panel frame, parts, 3D shape  Color  Red / black 
    from S$299.90
    Min. 2 days
  22. 3M Hot Melt Applicator 9234 Valve Assembly Kit
    3M 3M Hot Melt Applicator 9234 Valve Assembly Kit
    Valve attached to the tip of 3M hot melt gun
    Classification of the Hazardous  Non-dangerous goods  Main Works  Parts 
    from S$38.99
    Min. 2 days
  23. Nozzle For PKP
    BOSCH Nozzle For PKP
    Suitable Model  PKP18E  Main Works  Parts 
    from S$11.99
    Min. 2 days
  24. Mixing nozzle (10)
    ESCO Mixing nozzle (10)
    Mixing nozzle for EA934WD-50A, (old) EA934WE-50A. It can also be used for EA934WB-2.
    Nozzle Length (mm)  About 70  Esco Part No.  EA934WF-1A  Main Works  Panel frame, parts, 3D shape 
    from S$46.99
    Min. 2 days
  25. Dedicated mixing gun
    DIPPER Hokumei Dedicated mixing gun
    A special mixing gun is required to construct the best select bar.
    Main Works  Panel frame, parts, 3D shape 
    Rating:
    80%
    from S$119.90
    Min. 2 days
  26. 3M Hot Melt Adhesive Related Parts 2821 TC / TCQ Stand
    3M 3M Hot Melt Adhesive Related Parts 2821 TC / TCQ Stand
    Stand for 3M hot melt gun
    Classification of the Hazardous  Non-dangerous goods  Main Works  Parts 
    from S$249.90
    Min. 2 days
  27. 30 / 50cc dispenser
    ESCO 30 / 50cc dispenser
    Also used as a 30 to 50 mL cartridge. For EA934WD-50A, (old) EA934WE-50A, EA934DM-10 / 14
    Esco Part No.  EA934WF-50  Main Works  Panel frame, parts, 3D shape 
    from S$129.90
    Min. 2 days
  28. Gun cartridge
    Yamamoto Gun cartridge
    Sealing cartridge dedicated gun
    Classification of the Hazardous  Non-dangerous goods  Main Works  Parts 
    from S$46.99
    Min. 5 days
  29. Yamamoto epoxy injection gun YG-250 (no nozzle)
    Yamamoto Yamamoto epoxy injection gun YG-250 (no nozzle)
    Back leakage prevention! The degree of adhesion between the tank and packing has been improved. Furthermore, the tension of the packing can be adjusted with the nut at the tip. You can remove the lever part! You can clean by looking at the clogging of the material. You can tighten the screws even... Read More
    Classification of the Hazardous  Non-dangerous goods  Main Works  Parts 
    from S$87.99
    Min. 5 days
  30. 455-10 syringe gun (for 10ml)
    Henkel 455-10 syringe gun (for 10ml)
    Mass (g)  140  Trusco Part No.  480-1245  Classification of the Hazardous  Non-dangerous goods  Main Works  Panel frame, parts, 3D shape  Color  Red 
    from S$69.99
    Min. 2 days
  31. Mixing nozzle (for EA934DM-9-14 / 12 nozzles)
    ESCO Mixing nozzle (for EA934DM-9-14 / 12 nozzles)
    Mixing nozzle for EA934DM-10 / 14. Screw nozzle 2 liquids can be mixed and discharged. * Please use EA934WF-50 together. (Sold separately)
    Overall Length (mm)  150  Mass (g)  51.4, 4.3 (per bottle)  Esco Part No.  EA934DM-100  Main Works  Panel frame, parts, 3D shape 
    from S$53.99
    Min. 5 days
  32. Cartridge dispenser H293JPM
    Konishi Cartridge dispenser H293JPM
    Suitable for  (Cartridge) 05373  Mass (kg)  1.4  Height (mm)  190  Length (mm)  360  Trusco Part No.  447-4961  Main Works  Panel frame, parts, 3D shape 
    Rating:
    80%
    from S$329.90
    Min. 2 days
  33. Hand pump for anaerobic adhesive
    Henkel Hand pump for anaerobic adhesive
    A certain amount can be applied by pulling the lever. Therefore, it prevents the coating amount from varying depending on the operator. It can be used for loosening adhesives and fitting adhesives with viscosities up to 30,000 mps. A process that requires quantitative application on a production ... Read More
    Coating amount  0.010~0.04mL  Mass (g)  150  Trusco Part No.  356-4517  Compatible Container  50  Main Works  Parts  Specification  Point / drop coating  Material  Polypropylene (PP) 
    from S$229.90
    Min. 3 days
  34. Dual cartridge gun premium
    WURTH Dual cartridge gun premium
    Epoxy resin adhesives For ESK-48, ESK-50, and Replast Easy plastic adhesives.
    Material  Aluminum, stainless steel, plastic  Color  Black / red  Classification of the Hazardous  Non-dangerous goods  Main Works  Parts 
    from S$139.90
    Min. 4 days
  35. Melt sheet
    SOUTHERN CROSS Melt sheet
    You can easily remove the melted and hardened melt stick. For various original hobbies such as drawing and spreading.
    Heat Resistance Temperature (℃)  200  Dimension (mm)  200×200  Classification of the Hazardous  Non-dangerous goods  Main Works  Parts 
    from S$9.29
    Min. 2 days
  36. 2.25kg Hot Melt Coating (Amber)
    ESCO 2.25kg Hot Melt Coating (Amber)
    By coating tools and gauges, scratches and rust that occur during transportation and storage are prevented.
    Dimension (mm)  115×345×65  Melting Temperature (℃)  170~177  Mass (kg)  2.25  Color  Amber  Esco Part No.  EA305S-1  Main Works  Parts  Base Material  cellulose 
    from S$199.90
    Min. 6 days
  37. Loctite Supermatic Advance Flat nozzle
    Henkel Loctite Supermatic Advance Flat nozzle
    Length (mm)  19.5  Mass (g)  22  Trusco Part No.  445-2429  Main Works  Parts 
    from S$86.99
    Min. 3 days
  38. Loctite Supermatic Advance Long nozzle
    Henkel Loctite Supermatic Advance Long nozzle
    Length (mm)  10  Mass (g)  11  Trusco Part No.  445-2445  Main Works  Parts 
    from S$77.99
    Min. 2 days
  39. 3M hot melt adhesive related parts 9916 3 hole nozzle
    3M 3M hot melt adhesive related parts 9916 3 hole nozzle
    Nozzle that changes the coating shape of 3M hot melt gun * A separate valve assembly kit is required to install the AE2.
    Hole Spacing (mm)  3/3.5  Classification of the Hazardous  Non-dangerous goods  Main Works  Parts 
    from S$299.90
    Min. 5 days
  40. KG330I with 5mm Nozzle
    Tomosada Kenki KG330I with 5mm Nozzle
    For epoxy resin injection (medium to high viscosity)
    Mass (kg)  1.41  Discharge Rate (mL/stroke)  1.5  Capacity (mL)  300  Inner Diameter (Φmm)  60×395  Classification of the Hazardous  Non-dangerous goods  Main Works  Parts  Included Accessories  With 5mm nozzle 
    from S$139.90
    Min. 5 days
View : Grid List
Filter

Items 1 - 40 of 111

Set Ascending Direction