All Category

Grease Pumps

View : Grid List
Filter

Items 1 - 40 of 41

Set Ascending Direction
  1. Grease pump SHG type
    SHOWA Grease pump SHG type
    Manual pump for grease refueling Simple piping with single pipe system
    Maximum Discharge Pressure (MPa [kgf/cm2])  10[100]  Discharge Port Diameter Rc  1/8 
    Rating:
    60%
    from S$239.90
    Min. 2 days
  2. Hand bucket pail pump
    Yamada Corp. Hand bucket pail pump
    Ideal for oil for automobiles, construction machinery, and agricultural machinery. No need to transfer. It is easy to handle and has no trouble. * Pail cans are not included.
    Height (mm)  760  Mass (kg)  1.9 (main unit only)  Trusco Part No.  325-8670 
    Rating:
    100%
    from S$399.90
    Min. 2 days
  3. High pressure grease gun
    Yamada Corp. High pressure grease gun
    A control valve for pneumatic and electric grease lubricators. It is ideal for refueling equipment and equipment in all fields, including production equipment in general production factories, including vehicles and construction machinery.
    Mass (kg)  Overall Width (mm)  226  Overall Height (mm)  280  Suitable Model  EPL-100、SKR-55、66、110A50、110A50PAL  Connector Diameter  G1/4  Classification of the Hazardous  Non-dangerous goods  Included Accessories  Nozzle (CNP-2) swivel joint 
    from S$369.90
    Min. 2 days
  4. Hand relicator 20L
    TRUSCO Hand relicator 20L
    It is also suitable for outdoor work without a compressor. It can be set directly on a commercially available pail can (16 kg can). One gun is attached to each unit.
    Mass (kg)  12.8  Trusco Part No.  126-5377  Hose Length (mm)  1800  Capacity (L)  20 (16kg can)  Discharge Pressure (MPa)  24.5  Discharge Rate (mL/stroke)  Applicable Grease  Consistency # 0 ・ # 1  Set Contents  Dedicated gun FTK-70G  Classification of the Hazardous  Non-dangerous goods 
    Rating:
    100%
    from S$669.90
    Min. 2 days
  5. Oil pump
    ESCO Oil pump
    Supports up to SAE140 such as oil, lubricating oil, gear oil, etc.
    Esco Part No.  EA990XB-1  Discharge Rate (L/min)  Hose Length (m)  [Discharge hose] 1.5  Discharge Rate (mL/stroke)  50 
    Rating:
    20%
    from S$389.90
    Min. 2 days
  6. Booster grease gun B3 for P3C
    ZAHREN Booster grease gun B3 for P3C
    Type of Operation  Air type  Mass (g)  800  Trusco Part No.  853-6166  Suitable for  Power lube (air type) P3C 
    from S$479.90
    Min. 11 days
  7. 16kg grease charge gun set
    ESCO 16kg grease charge gun set
    Can be set directly in 16kg and 20kg cans.
    Hose Length (m)  1.5  Maximum Pumping Rate  30ml  Dimensions, Diameter x Height H (Φmm x mm)  350×650  Mass (kg)  Specification  Manual type  Classification of the Hazardous  Non-dangerous goods  Material  Steel 
    from S$489.90
    Min. 2 days
  8. Can for exclusive use of mini-lube K6
    ZAHREN Can for exclusive use of mini-lube K6
    Trusco Part No.  121-8425  Capacity (kg)  2.5  Mass (g)  600  Suitable Model  Mini-Lube K6  Applicable Grease  ~#2 
    from S$58.99
    Min. 2 days
  9. carry
    ZAHREN carry
    Common to K3 / J2 / J3 / P3C / P3L types
    Trusco Part No.  121-6546  Mass (kg)  2.5 
    from S$189.90
    Min. 2 days
  10. Mini-lube (cans sold separately)
    ZAHREN Mini-lube (cans sold separately)
    It can be set directly in a commercially available 2.5 kg can and does not require refilling of grease. It can be injected into about 30 nipples with one pump charge. With a new pressure-increasing gun.
    Hose Length (m)  1.5  Trusco Part No.  121-5817  Body Diameter (mm)  180  Container  2.5kg can  Mass (kg)  3.4  Pump charge (cc)  30  Height (mm)  360  Height H x Diameter (Φmm)  360×180  Maximum Pumping Rate  3cc / trigger  Maximum Discharge Pressure (MPa)  69  Applicable Grease  ~#2 
    from S$879.90
    Min. 3 days
  11. Big Lube (with special can)
    ZAHREN Big Lube (with special can)
    Comes with a 5kg can, which is twice as large as the mini lube. It can be injected into about 30 nipples with one pump charge. With a new pressure-increasing gun.
    Trusco Part No.  121-6147  Mass (kg)  4.4  Classification of the Hazardous  Non-dangerous goods 
    from S$859.90
    Min. 3 days
  12. Grease foot bucket pump
    Yamada Corp. Grease foot bucket pump
    Since it is a foot-operated type, grease-up can be done hands-free. Equipped with a lock coupler and pressure relief valve, the nozzle can be easily attached and detached. Lightweight, compact and convenient to carry. Grease greasing * Be careful not to mix foreign matter (dust).
    Applicable Grease  #0~#2  High Pressure Hose (m)  Discharge Rate (mL/stroke)  2.7  Width (mm)  239  Length (mm)  450  Height (mm)  452  Maximum Discharge Pressure (MPa)  69  Capacity (L)  Mass (kg)  8.6  Trusco Part No.  854-9167  Material  Steel 
    from S$1,099.00
    Min. 4 days
  13. Volume pump (only for filling)
    ZAHREN Volume pump (only for filling)
    It can be set directly in a commercially available 16 kg can. 1 stroke 60mL discharge. For filling special cans such as hand pumps and K6 / K5.
    Trusco Part No.  121-7879  Suitable for  16kg pail can  Dimensions, Diameter x Height H (Φmm x mm)  315×600  Mass (kg)  4.1  Maximum Discharge Pressure (MPa)  4.9  Discharge Volume (mL/time)  60  Classification of the Hazardous  Non-dangerous goods 
    from S$799.90
    Min. 2 days
  14. Grease charger
    ESCO Grease charger
    For grease charging of bearings of a wide range of sizes such as automobiles and construction machinery ・ For 16 kg round cans
    Compatible Bearing  15 ~ 100mm in diameter  Esco Part No.  EA991CP 
    from S$1,699.00
    Min. 4 days
  15. Air grease feeder nozzle adapter set
    KTC Air grease feeder nozzle adapter set
    It is a spare part for the air grease feeder AVG350.
    Suitable for  AVG350  Classification of the Hazardous  Non-dangerous goods 
    from S$459.90
    Min. 5 days
  16. Grease pump type MHG4
    SHOWA Grease pump type MHG4
    It is a single pipe type automatic grease pump. Since it does not have a control device, operate the pump intermittently before use.
    Maximum Discharge Pressure (MPa [kgf/cm2])  12[120]  Consistency  NLGI No.00~1  Discharge rate (cm 3 4.5/5.5(50/60Hz)/min  Discharge Port Diameter Rc  1/8 
    from S$569.90
    Min. 8 days
  17. Grease filling pump
    Daikin Lubrication Products and Engineering Grease filling pump
    Manual pump A pump that directly replenishes the tank of LB05F with grease from a commercially available 16 kg or 18 kg pail can. It is used in construction machinery and machine tools.
    Operating Force (N)  147  Discharge Pressure (MPa)  4.5  Mass (kg)  2.4  Type  Other pumps  Discharge rate (cm 3 / stroke)  Operating Temperature Range (℃)  -10~50 
    from S$1,199.00
    Min. 35 days
  18. Filler pump (only for filling)
    ZAHREN Filler pump (only for filling)
    It can be set directly in a commercially available 16 kg can. 1 stroke 60cc discharge. Dedicated for filling the reservoir tank of the centralized refueling device.
    Maximum Discharge Pressure (MPa)  4.9  Discharge Volume (mL/time)  60  Hose Length (m)  1.5 (with coupler)  Suitable for  16kg pail can  Trusco Part No.  121-7887  Dimensions, Diameter x Height H (Φmm x mm)  315×630  Mass (kg)  4.1 
    from S$1,099.00
    Min. 2 days
  19. Hand Liberator 8L
    TRUSCO Hand Liberator 8L
    It is also suitable for outdoor work without a compressor. It can be set directly on a commercially available pail can (16 kg can). One gun is attached to each unit.
    Trusco Part No.  126-5431  Hose Length (mm)  1820  Discharge Amount  4(cc/cycle)  Mass (kg)  6.1  Capacity (L)  Discharge Pressure (MPa)  9.8  Set Contents  Dedicated gun FTK-70G  Classification of the Hazardous  Non-dangerous goods 
    from S$869.90
    Min. 2 days
  20. Grease pump (for 16kg can)
    ESCO Grease pump (for 16kg can)
    Can be set directly in a 16 kg can.
    Hose Length (m)  1.8  Dimensions, Diameter x Height H (Φmm x mm)  308×435  Maximum Discharge Pressure  34.5MPa  Maximum Pumping Rate  4ml  Mass (kg)  7.5  Specification  Manual type  Classification of the Hazardous  Non-dangerous goods  Material  Steel 
    from S$1,299.00
    Min. 4 days
  21. Trolley
    ZAHREN Trolley
    Common to K3 / J2 / J3 / P3C / P3L types
    Trusco Part No.  121-6554  Mass (kg)  2.5  Diameter (Φmm)  300  Classification of the Hazardous  Non-dangerous goods 
    from S$159.90
    Min. 2 days
  22. Portable lubricator for oil
    Yamada Corp. Portable lubricator for oil
    If the delivery destination is a private house (detached house / apartment house), the shop name is required. Please note that delivery may not be possible if there is no store name. * Depending on the delivery location, the delivery date may be postponed and additional shipping charges may be in... Read More
    Trusco Part No.  853-6288 
    from S$5,899.00
    Min. 6 days
  23. Mug Note Power Lube
    ZAHREN Mug Note Power Lube
    Air-driven, continuous grease lubrication is possible For machine maintenance * Silicone grease cannot be used * Cans are sold separately * Carry (pail can carrier) is sold separately
    Classification of the Hazardous  Non-dangerous goods 
    from S$1,799.00
    Min. 32 days
  24. NPT3 / 4 " Manual gun nozzle (auto stop)
    ESCO NPT3 / 4 " Manual gun nozzle (auto stop)
    Refueling will stop automatically when the capacity is full.
    Classification of the Hazardous  Non-dangerous goods 
    from S$259.90
    Min. 5 days
  25. P3-01 Pump assembly
    ZAHREN P3-01 Pump assembly
    Mass (kg)  5.5  Classification of the Hazardous  Non-dangerous goods 
    from S$1,599.00
    Min. 13 days
  26. Lubricator gun
    TRUSCO Lubricator gun
    Discharge Amount  (Oil) 1800cc / min (Grease) 300cc / min  Trusco Part No.  164-2758  Mass (g)  960  Suitable Model  FTR-65G dedicated gun  Classification of the Hazardous  Non-dangerous goods 
    from S$349.90
    Min. 2 days
  27. Hand Bucket Volume Pump for Oil
    Yamada Corp. Hand Bucket Volume Pump for Oil
    This is a bucket pump for oil. It was developed for the purpose of refueling construction machinery with particularly strong adhesive oil, and the mouthpiece is a button head type, which enables quick and reliable refueling. Oil is refueled with a manual pump. Refuel with a manual pump * Data are... Read More
    Material  Steel 
    from S$759.90
    Min. 4 days
  28. P3-01 Pump body
    ZAHREN P3-01 Pump body
    Pump for P3-01JL / JC / JA
    Mass (kg)  3.2  Classification of the Hazardous  Non-dangerous goods 
    from S$1,199.00
    Min. 8 days
  29. Gun for handle briquettor
    TRUSCO Gun for handle briquettor
    It is also suitable for outdoor work without a compressor. One gun is included in each set. Please use grease from # 0 to # 1.
    Trusco Part No.  164-2766  Mass (g)  285  Specification  For hydraulic nipples only  Classification of the Hazardous  Non-dangerous goods 
    from S$88.99
    Min. 32 days
  30. Aerul Bricater 20L
    TRUSCO Aerul Bricater 20L
    It is used by connecting to an air compressor. A compact lubricator that is effective for grease-up of various machines and vehicles. Commercially available pail cans can be stored and used in the cabinet. One gun is attached to each unit. * Even if NLGI No. 0 to 1 grease is used, the grease may ... Read More
    Discharge Amount  (Oil) 30cc / sec (Grease) 5cc / sec  Suitable Air Pressure (MPa)  0.39~0.88  Trusco Part No.  126-5342  Discharge Pressure (MPa)  17.64~39.69  Capacity (L)  20  Mass (kg)  26  Hose Length (mm)  3000  Applicable Grease  NLGI No.0~1  Classification of the Hazardous  Non-dangerous goods 
    from S$2,999.00
    Min. 3 days
  31. Power lube (air type)
    ZAHREN Power lube (air type)
    Air type. It can be set directly in a commercially available 16 kg can.
    Suitable for  (Grease)-# 2  Air Pressure (MPa)  0.39~0.68  Air Consumption (L/min)  315  Maximum Pumping Rate  540ml / min  Height H x Diameter (Φmm)  555×315  Mass (kg)  Applicable Grease  ~#2 
    Discontinued
  32. Grease pump MHG7 type
    SHOWA Grease pump MHG7 type
    It is a single pipe type automatic grease pump. Since it does not have a control device, operate the pump intermittently before use.
    Discharge rate (cm 3 7.5/9.0(50/60Hz)/min  Maximum Discharge Pressure (MPa [kgf/cm2])  14[140]  Consistency  NLGI No.00~1  Discharge Port Diameter Rc  1/8 
    Discontinued
  33. Air grease feeder
    KTC Air grease feeder
    The nozzle adapter pushes out the old grease and injects new grease without removing the bearings. Grease can be injected into the removed bearing by setting it on the cone. Grease can be injected by operating the speed control of the piston even at about -10 ° C. The air filter is an automatic e... Read More
    Input Air Pressure (MPa)  0.6~0.97(6~9.7kgf/cm2)  Operating Ambient Temperature (℃)  0~40  Trusco Part No.  117-5510  Can used  16kg pail can  Dimension (mm)  460×360×1、190  Discharge Pressure (MPa)  7~8(70~80kgf /cm2)  Grease type  No.0~No.3  Classification of the Hazardous  Non-dangerous goods 
    Discontinued
  34. Lubricator for grease
    MonotaRO Lubricator for grease
    With convenient foot plate * Do not use for anything other than its intended purpose.
    Hose Length (m)  1.82  Volume per Discharge (mL)  Mass (kg)  6.1  Capacity (L)  Discharge Pressure (MPa)  9.8 
    Rating:
    100%
    Discontinued
  35. Lubricator gun
    TRUSCO Lubricator gun
    -A compact lubricator that is effective for grease-up of various machines and vehicles. -With cabinet and casters. -Commercially available pail cans can be stored and used in the cabinet.・ A compressor is required. (Please use only grease up to No. 0.)
    Type of Operation  Air type  Trusco Part No.  164-2758  Mass (g)  26 
    Discontinued
  36. Handle briquettor
    TRUSCO Handle briquettor
    -A manual pump that can hold a large amount of grease in the cabinet. -Suitable for outdoor work without a compressor. -Can be set directly on a commercially available pail can. (Please use only grease up to No. 0.) -With a dedicated carry. Capacity: 20L Hose length: 1800mm
    Mass (kg)  8.0  Discharge Amount  4cc/cycle  Discharge Pressure (MPa)  24.50  Trusco Part No.  126-5377 
    Discontinued
  37. Handle briquettor
    TRUSCO Handle briquettor
    -A manual pump that can hold a large amount of grease in the cabinet. -Suitable for outdoor work without a compressor. (Use only grease up to No. 0.) Capacity: 8L Hose length: 1820mm
    Discharge Amount  4cc/cycle  Mass (kg)  6.1  Trusco Part No.  126-5431  Discharge Pressure (MPa)  34.30 
    Discontinued
  38. Grease gun for Samoa extruder
    ZAHREN Grease gun for Samoa extruder
    This grease pump is ideal for various maintenance and equipment grease-up maintenance in all fields. Grease gun for pneumatic grease pump (SGE-1000) with swivel joint * Please purchase the grease gun and pressure resistant hose separately.
    Trusco Part No.  381-9515  Classification of the Hazardous  Non-dangerous goods  Suitable Model  SGE-1000 
    Discontinued
  39. Gun for handle briquettor
    TRUSCO Gun for handle briquettor
    -A manual pump that can hold a large amount of grease in the cabinet. -Suitable for outdoor work without a compressor. -Can be set directly on a commercially available pail can. (Please use only grease up to No. 0.) -With a dedicated carry.
    Type of Operation  Air type  Trusco Part No.  164-2766  Mass (g) 
    Discontinued
View : Grid List
Filter

Items 1 - 40 of 41

Set Ascending Direction