All Category

Lifting Chain Related Supplies

View : Grid List
Filter

37 Item(s)

Set Ascending Direction
  1. Reflective parts for chains Chain eye (yellow)
    Mizumoto Machine Mfg. Reflective parts for chains Chain eye (yellow)
    Just snap it in with one touch. It reflects light such as headlights.
    Material  Polyethylene (PE)  Suitable for  Stainless chain 8-B, 9-B, 10-A  Color  yellow 
    Rating:
    80%
    from S$1.09
    Min. 2 days
  2. Chain reflective parts Chain eye (white)
    Mizumoto Machine Mfg. Chain reflective parts Chain eye (white)
    When attached to a chain that is difficult to see in the evening or at night, it reflects off the headlights of the car and glows. Night mark (reflective type)
    Material  Polyethylene (PE) 
    from S$0.99
    Min. 4 days
  3. Stainless chain stopper (L = 60)
    TAKIGEN MFG Stainless chain stopper (L = 60)
    TAKIGEN code  11502  Dimension D (Φmm)  Dimension L (mm)  60  Working load (N)  600  Dimension W (mm)  Dimension d (mm)  Material  Stainless steel 
    from S$5.99
    Min. 2 days
  4. Chain reflective parts Chain eye (red)
    Mizumoto Machine Mfg. Chain reflective parts Chain eye (red)
    When attached to a chain that is difficult to see in the evening or at night, it reflects off the headlights of the car and glows. Night mark (reflective type)
    Mass (g)  0.75  Dimension D (mm)  16  Dimension H (mm)  5~7  Dimension d (mm)  Trusco Part No.  849-0326  Material  Polyethylene (PE) 
    from S$1.09
    Min. 2 days
  5. Chain stopper (L = 41)
    TAKIGEN MFG Chain stopper (L = 41)
    TAKIGEN code  11237  Working load (N)  250  Dimension D (Φmm)  4.5  Dimension L (mm)  41  Dimension W (mm)  Dimension d (mm)  Material  Iron  Surface finish  Zinc plating chromate treatment 
    from S$2.39
    Min. 2 days
  6. Stainless chain stopper (L = 52)
    TAKIGEN MFG Stainless chain stopper (L = 52)
    Working load (N)  1000  TAKIGEN code  11491  Dimension W (mm)  13  Dimension D (Φmm)  Dimension L1 (mm)  52  Dimension L2 (mm)  8.5  Material  Stainless steel 
    from S$6.99
    Min. 2 days
  7. Stainless steel chain joint hole diameter 6. 5mm length 29mm
    Mizumoto Machine Mfg. Stainless steel chain joint hole diameter 6. 5mm length 29mm
    You can also hit it with a hammer to prevent it from coming off. As a connecting bracket for chains, wires, ropes, etc., and as a joint for terminal brackets
    Working load (kN)  0.39  Dimension W (mm)  15  Dimension L (mm)  29  Chain Link Diameter (Φmm)  Mass (g)  Dimension D (mm)  6.5  Trusco Part No.  849-0338 
    from S$2.39
    Min. 4 days
  8. Stainless chain joint hole diameter 7. 5mm length 33mm
    Mizumoto Machine Mfg. Stainless chain joint hole diameter 7. 5mm length 33mm
    You can also hit it with a hammer to prevent it from coming off. As a connecting bracket for chains, wires, ropes, etc., and as a joint for terminal brackets
    Working load (kN)  0.59  Dimension W (mm)  17  Dimension L (mm)  33  Chain Link Diameter (Φmm)  Dimension D (mm)  7.5  Mass (g)  Trusco Part No.  849-0339 
    from S$2.59
    Min. 5 days
  9. Chain stopper (L = 60)
    TAKIGEN MFG Chain stopper (L = 60)
    TAKIGEN code  11239  Working load (N)  500  Dimension D (Φmm)  Dimension L (mm)  60  Dimension W (mm)  Dimension d (mm)  Material  Iron  Surface finish  Zinc plating chromate treatment 
    from S$2.49
    Min. 5 days
  10. Stainless steel chain joint hole diameter 6. 2mm length 26mm
    Mizumoto Machine Mfg. Stainless steel chain joint hole diameter 6. 2mm length 26mm
    You can also hit it with a hammer to prevent it from coming off. As a connecting bracket for chains, wires, ropes, etc., and as a joint for terminal brackets
    Working load (kN)  0.25  Dimension W (mm)  13  Dimension L (mm)  26  Chain Link Diameter (Φmm)  2~2.5  Mass (g)  Dimension D (mm)  6.2  Trusco Part No.  849-0337 
    from S$2.39
    Min. 3 days
  11. Stainless chain stopper (L = 80)
    TAKIGEN MFG Stainless chain stopper (L = 80)
    TAKIGEN code  11504  Dimension d (mm)  12  Dimension D (Φmm)  Dimension L (mm)  80  Working load (N)  800  Dimension W (mm)  Material  Stainless steel 
    from S$9.99
    Min. 5 days
  12. Stainless chain joint hole diameter 9mm length 39mm
    Mizumoto Machine Mfg. Stainless chain joint hole diameter 9mm length 39mm
    You can also hit it with a hammer to prevent it from coming off. As a connecting bracket for chains, wires, ropes, etc., and as a joint for terminal brackets
    Working load (kN)  0.78  Mass (g)  12  Dimension W (mm)  19  Dimension L (mm)  39  Chain Link Diameter (Φmm)  5~6  Trusco Part No.  849-0340  Dimension D (mm) 
    from S$3.39
    Min. 3 days
  13. Stainless chain stopper (L = 61)
    TAKIGEN MFG Stainless chain stopper (L = 61)
    TAKIGEN code  11492  Working load (N)  1200  Dimension W (mm)  15  Dimension D (Φmm)  Dimension L1 (mm)  61  Dimension L2 (mm)  9.5  Material  Stainless steel 
    from S$8.69
    Min. 4 days
  14. Stainless chain stopper (L = 50)
    TAKIGEN MFG Stainless chain stopper (L = 50)
    TAKIGEN code  11501  Dimension D (Φmm)  Dimension L (mm)  50  Working load (N)  500  Dimension W (mm)  Dimension d (mm)  Material  Stainless steel 
    from S$5.69
    Min. 2 days
  15. Stainless chain stopper (L = 90)
    TAKIGEN MFG Stainless chain stopper (L = 90)
    Dimension D (Φmm)  10  TAKIGEN code  11496  Dimension L2 (mm)  12  Dimension W (mm)  22  Working load (N)  3500  Dimension L1 (mm)  90  Material  Stainless steel 
    from S$28.99
    Min. 5 days
  16. Chain stopper (L = 50)
    TAKIGEN MFG Chain stopper (L = 50)
    TAKIGEN code  11238  Working load (N)  400  Dimension D (Φmm)  Dimension L (mm)  50  Dimension W (mm)  Dimension d (mm)  Material  Iron  Surface finish  Zinc plating chromate treatment 
    from S$2.19
    Min. 5 days
  17. Stainless steel heavy chain catch Wire diameter 5mm Inner diameter 25mm
    Mizumoto Machine Mfg. Stainless steel heavy chain catch Wire diameter 5mm Inner diameter 25mm
    RoHS directive (corresponding to 10 substances)  Trusco Part No.  849-0315 
    from S$14.99
    Min. 4 days
  18. Stainless steel chain catch inner diameter 40mm
    Mizumoto Machine Mfg. Stainless steel chain catch inner diameter 40mm
    RoHS directive (corresponding to 10 substances)  Trusco Part No.  849-0314 
    from S$12.99
    Min. 4 days
  19. Stainless chain stopper (L = 35)
    TAKIGEN MFG Stainless chain stopper (L = 35)
    Dimension W (mm)  10  TAKIGEN code  11489  Dimension D (Φmm)  Working load (N)  300  Dimension L1 (mm)  35  Dimension L2 (mm)  5.5  Material  Stainless steel 
    from S$5.49
    Min. 5 days
  20. Chain stopper (L = 80)
    TAKIGEN MFG Chain stopper (L = 80)
    TAKIGEN code  11241  Dimension d (mm)  12  Working load (N)  700  Dimension D (Φmm)  Dimension L (mm)  80  Dimension W (mm)  Material  Iron  Surface finish  Zinc plating chromate treatment 
    from S$3.39
    Min. 5 days
  21. Stainless steel chain catch ID 25mm
    Mizumoto Machine Mfg. Stainless steel chain catch ID 25mm
    RoHS directive (corresponding to 10 substances)  Trusco Part No.  849-0311 
    from S$5.69
    Min. 4 days
  22. Chain stopper (L = 70)
    TAKIGEN MFG Chain stopper (L = 70)
    Dimension d (mm)  11  TAKIGEN code  11240  Working load (N)  600  Dimension D (Φmm)  Dimension L (mm)  70  Dimension W (mm)  Material  Iron  Surface finish  Zinc plating chromate treatment 
    from S$2.89
    Min. 5 days
  23. Chain stopper (L = 49.5)
    TAKIGEN MFG Chain stopper (L = 49.5)
    TAKIGEN code  11226  Dimension W (mm)  12.5  Dimension L1 (mm)  49.5  Dimension D (Φmm)  Dimension L2 (mm)  6.5  Working load (N)  800  Material  Iron 
    from S$2.19
    Min. 5 days
  24. Stainless steel mini joint Chain diameter 2 ~ 2.5mm
    Mizumoto Machine Mfg. Stainless steel mini joint Chain diameter 2 ~ 2.5mm
    It can be attached and detached with the machine screw in the center. As a chain connecting bracket and as a joint for terminal brackets
    Dimension h2 (mm)  1.2  Dimension P (mm)  12  Dimension L (mm)  20  Chain Link Diameter (Φmm)  2~2.5  Mass (g)  Dimension h1 (mm)  5.3  Dimension W (mm)  Dimension H (mm)  Trusco Part No.  849-0393  Bolt Diameter  M-3 
    from S$4.79
    Min. 3 days
  25. Stainless steel heavy chain catch Wire diameter 6mm Inner diameter 30mm
    Mizumoto Machine Mfg. Stainless steel heavy chain catch Wire diameter 6mm Inner diameter 30mm
    RoHS directive (corresponding to 10 substances)  Trusco Part No.  849-0316 
    from S$15.99
    Min. 4 days
  26. Stainless steel + chain stopper (L=77)
    TAKIGEN MFG Stainless steel + chain stopper (L=77)
    Dimension L2 (mm)  10  TAKIGEN code  11494  Dimension W (mm)  17  Mass (g)  2500  Dimension L1 (mm)  77  Dimension D (Φmm)  Material  Stainless steel 
    from S$15.99
    Min. 5 days
  27. Chain balancer
    Eagle Clamp Chain balancer
    Structures that allow quick balance lifting even for unbalanced workpieces such as steel structures By adopting the optimum chain for causing and reversing work where the height of the hanging point changes when lifting steel structures, etc. Unlike the wire type of slinging work from the wire, t... Read More
    from S$1,799.00
    Min. 5 days
  28. Stainless steel heavy chain catch Wire diameter 8mm Inner diameter 35mm
    Mizumoto Machine Mfg. Stainless steel heavy chain catch Wire diameter 8mm Inner diameter 35mm
    RoHS directive (corresponding to 10 substances)  Trusco Part No.  849-0317 
    from S$22.99
    Min. 4 days
  29. Stainless steel + chain stopper (L=68)
    TAKIGEN MFG Stainless steel + chain stopper (L=68)
    TAKIGEN code  11493  Dimension W (mm)  17  Mass (g)  2000  Dimension L1 (mm)  68  Dimension D (Φmm)  Dimension L2 (mm)  8.5  Material  Stainless steel 
    from S$13.99
    Min. 5 days
  30. Stainless steel + chain stopper (L=82)
    TAKIGEN MFG Stainless steel + chain stopper (L=82)
    Dimension L2 (mm)  11  TAKIGEN code  11495  Dimension W (mm)  19  Mass (g)  3000  Dimension L1 (mm)  82  Dimension D (Φmm)  Material  Stainless steel 
    from S$22.99
    Min. 5 days
  31. Stainless steel heavy chain catch Wire diameter 9mm Inner diameter 40mm
    Mizumoto Machine Mfg. Stainless steel heavy chain catch Wire diameter 9mm Inner diameter 40mm
    RoHS directive (corresponding to 10 substances)  Trusco Part No.  849-0318 
    from S$26.99
    Min. 4 days
  32. Stainless chain stopper (L = 42)
    TAKIGEN MFG Stainless chain stopper (L = 42)
    Dimension W (mm)  11  TAKIGEN code  11490  Dimension D (Φmm)  Dimension L1 (mm)  42  Dimension L2 (mm)  6.5  Working load (N)  600  Material  Stainless steel 
    from S$6.19
    Min. 4 days
  33. Reflective parts for chains Chain eye (green)
    Mizumoto Machine Mfg. Reflective parts for chains Chain eye (green)
    When attached to a chain that is difficult to see in the evening or at night, it reflects off the headlights of the car and glows. Night mark (reflective type)
    Mass (g)  0.75  Dimension D (mm)  16  Dimension H (mm)  5~7  Dimension d (mm)  Trusco Part No.  849-0325  Material  Polyethylene (PE) 
    from S$1.09
    Min. 3 days
  34. Chain stopper (L = 33.5)
    TAKIGEN MFG Chain stopper (L = 33.5)
    TAKIGEN code  11224  Dimension D (Φmm)  Working load (N)  300  Dimension L1 (mm)  33.5  Dimension L2 (mm)  4.5  Dimension W (mm)  8.5  Material  Iron 
    from S$1.59
    Min. 5 days
  35. Stainless steel chain catch inner diameter 30mm
    Mizumoto Machine Mfg. Stainless steel chain catch inner diameter 30mm
    RoHS directive (corresponding to 10 substances)  Trusco Part No.  849-0312 
    from S$7.19
    Min. 4 days
  36. Stainless steel chain catch 35mm inside diameter
    Mizumoto Machine Mfg. Stainless steel chain catch 35mm inside diameter
    RoHS directive (corresponding to 10 substances)  Trusco Part No.  849-0313 
    from S$9.39
    Min. 4 days
  37. Ring joint
    KOTO Ring joint
    You can adjust the long chain to be shorter, or you can use it as a long chain by connecting the short chain.
    Case Dimensions (mm)  170×20×90  Load capacity (t)  10  Mass (kg)  0.76 
    Discontinued
View : Grid List
Filter

37 Item(s)

Set Ascending Direction