All Category

Hardwares (Metal Rack Parts/Options)

View : Grid List
Filter

30 Item(s)

Set Ascending Direction
  1. Luminous Sleeve Set
    Luminous Luminous Sleeve Set
    It is a part that plays a role like a nail when attaching parts such as steel shelves to a pole. For example, four pairs of these sleeves are required to fix one steel shelf.
    Pole Diameter (Φmm)  25  Material  ABS resin 
    from S$3.89
    Min. 2 days
  2. Metal Rack Shelf Board Fixing Parts
    IRIS OHYAMA Metal Rack Shelf Board Fixing Parts
    Shelf fixing parts for metal racks.
    Mass (g)  16.8  Trusco Part No.  385-2903  Dimensions (cm)  3W×2D×4.4H  Applicable pole diameter (Φmm)  About 25 
    from S$5.19
    Min. 2 days
  3. Luminous Light Sleeve Set
    Luminous Luminous Light Sleeve Set
    It is a part that plays a role like a nail when attaching parts such as steel shelves to a pole. For example, four pairs of these sleeves are required to fix one steel shelf. *This sleeve is often sold separately on parts sales shelves, so please be careful when purchasing.
    Pole Diameter (Φmm)  19  Material  ABS resin 
    from S$3.59
    Min. 2 days
  4. 4 Sets of Shelf Board Fixing Parts for Metal Rack Mini
    IRIS OHYAMA 4 Sets of Shelf Board Fixing Parts for Metal Rack Mini
    Shelf plate fixing parts for metal mini. Used for mounting shelves and side bars. Shelf plate fixing parts for metal mini.
    Length (mm)  15  Width (mm)  24  Mass (g)  27.5  Height (mm)  36  Trusco Part No.  404-7966  Material  ABS resin  Applicable pole diameter (Φmm)  About 19  Suitable for  Metal Mini / Metal Shelf SEM 
    from S$3.89
    Min. 2 days
  5. Luminous joint, set of 4
    Luminous Luminous joint, set of 4
    A necessary part when using divisible poles separately. If you split the pole, attach a cap to the top of the lower pole and a joint to the bottom of the upper pole.
    Pole Diameter (Φmm)  25 
    from S$7.79
    Min. 2 days
  6. Mesh rack support bracket
    TRUSCO Mesh rack support bracket
    For connecting shelf posts.
    Trusco Part No.  256-6150  Mass (g)  60  Specification  For Φ25.4mm support 
    from S$3.49
    Min. 2 days
  7. Metal slim Shelf board fixing part Φ12.7mm
    IRIS OHYAMA Metal slim Shelf board fixing part Φ12.7mm
    [Pole diameter 12.7mm] Shelf plate fixing parts for Iris Ohyama's metal rack (R) series metal slim. Used for fixing shelves. "Metal Rack" and "Metal Rack" are registered trademarks of Iris Ohyama Co., Ltd. Shelf fixing parts for Iris Ohyama Metal Slim. You can make an orig... Read More
    Dimensions, Width W x Depth D x Height H (mm)  18×18×31  Material  ABS resin  Applicable pole diameter (Φmm)  About 12.7 
    from S$2.69
    Min. 2 days
  8. Luminous Joint Set of 2
    Luminous Luminous Joint Set of 2
    It is a necessary part when connecting poles with a diameter of 25 mm. *Please purchase when lost or damaged.
    Pole Diameter (Φmm)  25  Material  Steel (galvanized) 
    from S$7.79
    Min. 2 days
  9. Luminous connection connector set
    Luminous Luminous connection connector set
    It is a part that firmly connects the poles of adjacent racks. By connecting the poles at the corners, etc., the structure will be strong against shaking such as earthquakes. *When using, be sure to attach it to the top and bottom of the pole.
    Pole Diameter (Φmm)  25  Material  Steel (chrome plated) 
    from S$15.99
    Min. 2 days
  10. Luminous connector set
    Luminous Luminous connector set
    It is a part that allows you to easily connect additional steel shelves in the left, right, front and back directions at the height of the steel shelf. Since it can also be used for wire bars, etc., it is convenient to set the wire bars in advance when assembling the rack.
    Pole Diameter (Φmm)  25  Specification  For shelf connection  Material  Steel (chrome plated) 
    from S$7.79
    Min. 2 days
  11. Metal rack connector
    IRIS OHYAMA Metal rack connector
    Connector for exclusive use of metal racks. Used for attaching mesh panels and connecting shelves.
    Dimensions, Width W x Depth D x Height H (mm)  20×26×38  Trusco Part No.  385-2822  Material  Steel (chrome plating) 
    from S$7.19
    Min. 2 days
  12. Luminous light connector set
    Luminous Luminous light connector set
    It is a part that allows you to easily connect additional steel shelves in the left, right, front and back directions at the height of the steel shelf. Since it can also be used for wire bars, etc., it is convenient to set the wire bars in advance when assembling the rack.
    Pole Diameter (Φmm)  19  Specification  For shelf connection  Material  Steel (chrome plated) 
    from S$7.79
    Min. 2 days
  13. Mesh rack joint
    IRIS OHYAMA Mesh rack joint
    Joint parts for connecting mesh panels. It is a type that clamps the panel and fastens with screws, and it is a set of 4 pieces.
    Dimensions, Height x Width x Thickness (mm)  31×15×30  Material  Steel (Epoxy powder coating) 
    from S$6.29
    Min. 2 days
  14. Mesh panel mounting holder
    IRIS OHYAMA Mesh panel mounting holder
    Metal fittings necessary for creating partitions by combining mesh panels and telescopic rods. 1 set contains 2 pieces.
    Allowable Load (kg)  (Overall) Approx. 20  Dimensions, Height x Width x Thickness (mm)  35×60×20  Material  Steel (Epoxy powder coating) 
    from S$6.99
    Min. 5 days
  15. Connector for metal rack (R) metal mini (for connecting shelf boards) Φ19mm
    IRIS OHYAMA Connector for metal rack (R) metal mini (for connecting shelf boards) Φ19mm
    [Pole diameter 19 mm] This is a connector for connecting shelf boards exclusively for compact type metal mini metal racks (R). It is a set of 2. "Metal Rack" and "Metal Rack" are registered trademarks of Iris Ohyama Co., Ltd. A connector for connecting shelf boards exclusively... Read More
    Width (mm)  16  Length (mm)  23  Height (mm)  35  Trusco Part No.  404-7991  Mass (g)  70  Applicable pole diameter (Φmm)  About 19  Material  Steel (chrome plated) 
    from S$7.39
    Min. 2 days
  16. Assembly pipe system Metal joint (conductive)
    TRUSCO Assembly pipe system Metal joint (conductive)
    Use a 5mm hex wrench for tightening (with tightening screw).
    Surface Resistance (Ω)  105 
    from S$6.39
    Min. 2 days
  17. Mesh shelf connection bracket
    TRUSCO Mesh shelf connection bracket
    For connecting shelf boards without using supports.
    Mass (g)  20  Trusco Part No.  256-6168 
    from S$3.39
    Min. 2 days
  18. Metal fittings for mesh panel plasterboard
    IRIS OHYAMA Metal fittings for mesh panel plasterboard
    A special metal fitting used when hanging a mesh panel on a gypsum board or a hollow wall. 1 set contains 4 pieces. Comes with 12 board pins for mounting.
    Allowable Load (kg)  (Overall) Approx. 5  Dimensions, Height x Width x Thickness (mm)  55×25×19  Material  Steel (Epoxy powder coating) 
    from S$9.39
    Min. 5 days
  19. 400x15x110mm metal rack mini guide
    ESCO 400x15x110mm metal rack mini guide
    The height of the shelf board can be changed freely. Prevents items from falling. It can be used for shelf boards of 470 mm or more.
    Mass (g)  250  Dimension (mm)  400×15×110  Esco Part No.  EA976AK-22  Material  Steel (chrome plating) 
    from S$7.99
    Min. 6 days
  20. 2-prong connector MZ4
    Hasegawa Kogyo 2-prong connector MZ4
    Suitable Model  For MZ4 
    from S$529.90
    Min. 4 days
  21. Sleeve set for mesh rack 19mm
    MonotaRO Sleeve set for mesh rack 19mm
    19mm sleeve for mesh rack economy. It is used to stop the shelf. As a sleeve for mesh rack economy * Do not use for anything other than its intended purpose.
    Pole Diameter (Φmm)  19  Color  Black  Suitable for  Monotaro Mesh Rack Economy Series  Material  PP 
    from S$2.69
    Min. 2 days
  22. Metal rack connector (2)
    ESCO Metal rack connector (2)
    Used for attaching mesh panels for metal racks and connecting shelves. Also suitable for EA976AJ-71 and -72 partitions.
    Mass (g)  110  Dimension (mm)  20×26×38(H)  Esco Part No.  EA976AJ-41  Material  Steel (chrome plating) 
    from S$6.89
    Min. 6 days
  23. Mesh Rack Sleeve
    MonotaRO Mesh Rack Sleeve
    Sleeve for mesh rack. It is used to stop the shelf. As a sleeve for mesh racks * Do not use for anything other than its intended purpose.
    Pole Diameter (Φmm)  25  Color  Black  Material  PP 
    from S$2.99
    Min. 2 days
  24. Mesh panel Kamoi bracket
    IRIS OHYAMA Mesh panel Kamoi bracket
    It is a special metal fitting used when hanging the mesh panel on the lintel. 1 set contains 2 for the upper part and 2 for the lower part. Comes with 4 screws for mounting.
    Dimensions, Height x Width x Thickness (mm)  40×25×28  Material  Steel (Epoxy powder coating) 
    Discontinued
  25. Shelf bracket for expansion of mesh rack
    IRIS OHYAMA Shelf bracket for expansion of mesh rack
    It is a metal fitting for fixing the shelf board for the mesh rack. Contains 4 pieces per set.
    Dimensions, Height x Width x Thickness (mm)  20×30×57  Material  Steel (Epoxy powder coating) 
    Discontinued
  26. Mesh rack shelf bracket
    IRIS OHYAMA Mesh rack shelf bracket
    It is a metal fitting for fixing the shelf board for the mesh rack. 4 pieces make up one set.
    Dimensions, Height x Width x Thickness (mm)  20×23×57  Material  Steel (Epoxy powder coating) 
    Discontinued
  27. Mesh panel rubber feet
    IRIS OHYAMA Mesh panel rubber feet
    Rubber legs for mesh panels. Prevents scratches on the floor, such as when creating racks. Contains 4 pieces per set.
    Dimensions, Height x Width x Thickness (mm)  30×30×10  Material  Elastomer resin  Color  White 
    Discontinued
  28. Mesh rack DIY board mounting bracket
    IRIS OHYAMA Mesh rack DIY board mounting bracket
    It is a metal fitting for attaching our DIY board to the mesh panel. Contains 4 pieces per set.
    Dimensions, Height x Width x Thickness (mm)  20×30×19  Material  Steel (Epoxy powder coating) 
    Discontinued
  29. Mesh panel long metal fittings
    IRIS OHYAMA Mesh panel long metal fittings
    It is a special metal fitting used when hanging the mesh panel for a long time. 1 set contains 2 for the upper part and 2 for the lower part.
    Dimensions, Height x Width x Thickness (mm)  40×25×28  Material  Steel (Epoxy powder coating) 
    Discontinued
  30. Metal pole pocket
    LEC Metal pole pocket
    A hook that can be attached to a steel pole rack with a diameter of 25 to 25.4 mm.
    Allowable Load (kg)  Suitable Diameter (Φmm)  25~25.4  Material  ABS resin resistant 
    Discontinued
View : Grid List
Filter

30 Item(s)

Set Ascending Direction