Chemicals for PCB Surface Mounting
Other Related Pages
- AS ONE Precision Parts Storage and Transfer CaseDevices, etc. can be adhered and fixed, making it convenient for storage and transportation. Devices can be attached and removed with tweezers.Heat Resistance Temperature (℃) -60 to +200 (gel part) Container Type Box type Classification of the Hazardous Non-dangerous goods
- Sunhayato High thermal conductive adhesive sheetIt is an adhesive sheet that not only has good thermal conductivity but also can be electrically insulated. A double-sided adhesive sheet with excellent thermal conductivity and low thermal resistance. It has high adhesive strength and excellent strength and reliability. Since it is A4 size, it c... Read MoreThickness (mm) 0.125 Dielectric Breakdown Voltage (kV) 0.5 Operating Temperature (℃) 0~120 Thermal Conductivity (W/mk) 1.1 Dimension (mm) 200×300 Classification of the Hazardous Non-dangerous goods Adhesive Pressure sensitive acrylic Flame Retardance UL94 V-0 Color White
- 3M Thermally conductive double-sided tapeIt can be used for fixing heat countermeasure parts in all fields. Since it is a double-sided tape composed only of adhesive, it fits well to the adherend and has excellent workability. Highly flame-retardant acrylic heat conductive tape. It has high adhesive strength that can replace the screw m... Read More2018 Trusco page 6 1999 Classification of the Hazardous Non-dangerous goods
- ENGINEER IC caseCompact IC case with high-density 10 mm thick conductive urethane foam laid on an antistatic plastic caseContainer Type Box type RoHS directive (corresponding to 10 substances) Correspondence Classification of the Hazardous Non-dangerous goods
- HOZAN (HOZAN TOOL INDUSTRIAL) ESD parts case (transparent)Uses a material with excellent durability of antistatic effect. You can check the contents without opening and closing in the transparent case. Ideal for transporting and storing electronic components that are sensitive to static electricity, such as ICs and MOS-ICs. Just insert it into the IC fo... Read MoreCapacity (L) 1.7 Surface Resistance (Ω) 10 11 or less Trusco Part No. 117-3545 Effective Internal Dimensions, W x D x H (mm) 245×176×24.5 Outer Dimensions, Width W x Depth D x Height H (mm) 254×185×41 Outer dimensions, Width W x Height H x Depth D (mm) 254×41×185 Mass (g) 420 Container Type Box type Material Conductive plastic RoHS directive (corresponding to 10 substances) Correspondence Included Accessories F-10-A x 1
- 3M Hyper soft heat dissipation sheetAcrylic heat conductive sheet with high heat conductivity that achieves a heat resistant temperature of 130 ° C. High thermal conductivity is high, and it has excellent shape followability and adhesion to the adherend, so a high thermal conductivity effect can be obtained. Since it is a non-silic... Read More2018 Trusco page 3 0701 Material Base material: Acrylic Classification of the Hazardous Non-dangerous goods
- EXSEAL gel base 2 inchTransport case for precision devices. A case and tray set. The tray can be removed and used. There are two types of case heights.Dimension (mm) 42×42 Tray dimensions (width x depth x depth) (mm) 50.8×50.8×4 Color Candy color Classification of the Hazardous Non-dangerous goods Standard SDS、RoHS
- 3M Thermally conductive double-sided tape (high adhesion type)It can be used for fixing heat countermeasure parts in all fields. Since it is a double-sided tape composed only of adhesive, it fits well to the adherend and has excellent workability. Highly flame-retardant acrylic heat conductive tape. It has high adhesive strength that can replace the screw m... Read MoreMass (g) 300 2018 Trusco page 6 1999 Trusco Part No. 855-8661 Classification of the Hazardous Non-dangerous goodsfrom S$28.99Min. 2 days
- Taica Heat dissipation gel sheet lambda gel hardness 90A very soft thermal gel. It has high thermal conductivity and exhibits excellent heat dissipation. With excellent flexibility and adhesiveness, it adheres to uneven surfaces and does not create an air layer on the contact surface. Has excellent electrical insulation and flame retardancy. It can b... Read MoreOperating Temperature Range (℃) -40~150 Tensile Strength (MPa) 0.14 Dielectric Breakdown Voltage (kV/mm) 16.5 Volume Resistivity (Ωcm) 3.1×1013 Elongation (%) 480 Hardness 90 (Penetration 1 / 10mm) Classification of the Hazardous Non-dangerous goods Material Silicone gel, heat conductive fillerfrom S$78.99Min. 2 days
- HOZAN (HOZAN TOOL INDUSTRIAL) ESD parts caseIdeal for transporting and storing electronic components that are sensitive to static electricity, such as ICs and MOS-ICs. Just insert it into the IC foam and it will be kept at the same potential to prevent static electricity damage. Transportation and storage of electronic components.Capacity (L) 1.5 Surface Resistance (Ω) 10 6 or less Trusco Part No. 117-3553 Effective Internal Dimensions, W x D x H (mm) 245×176×24.5 Outer Dimensions, Width W x Depth D x Height H (mm) 254×185×41 Outer dimensions, Width W x Height H x Depth D (mm) 254×41×185 Mass (g) 460 Container Type Box type RoHS directive (corresponding to 10 substances) Correspondence Included Accessories F-10-A x 1 Material PS (with carbon)from S$47.99Min. 2 days
- Taica Heat dissipation gel sheet lambda gel (hardness 60)A very soft thermal gel. It has high thermal conductivity and exhibits excellent heat dissipation. With excellent flexibility and adhesiveness, it adheres to uneven surfaces and does not create an air layer on the contact surface. Has excellent electrical insulation and flame retardancy. It can b... Read MoreOperating Temperature Range (℃) -40~150 Dielectric strength (kV / mm) 16.5 Elongation (%) 205 Hardness 60 (Penetration 1 / 10mm) Classification of the Hazardous Non-dangerous goods Material Silicone gel, heat conductive fillerfrom S$86.99Min. 2 days
- EXSEAL Tip removerAn adhesive gel for fingertips that removes dirt and sebum from gloves.Hardness Asker C30 Color Blue green Dimensions, Diameter x Height H (Φmm x mm)Φ Bottom Φ80 × 50 Classification of the Hazardous Non-dangerous goods Specification Non-plastic, non-silicone Standard SDS、RoHSfrom S$86.99Min. 2 days
- EXSEAL Gel baseA shipping case for precision devices. It is a set of the main body and lid.Height (mm) (device in case) 4.5 Classification of the Hazardous Non-dangerous goods Standard SDS、RoHSfrom S$449.90Min. 12 days
- Taica Paste-like heat conductive gel "DP series" DP-200 4. 8W / mKA very soft thermal gel. Achieves high thermal conductivity and exhibits excellent heat dissipation. With excellent flexibility and adhesiveness, it adheres to uneven surfaces and does not create an air layer on the contact surface. Has excellent electrical insulation and flame retardancy. It can... Read MoreOperating Temperature Range (℃) -40~150 Specific Gravity 2.6 Capacity (mL) 30 Dielectric strength (kV / mm) 5.6 Hardness 55 (consistency) (1 / 10mm, unmixed) Volume Resistivity (Ωcm) 7.2×1014 Trusco Part No. 850-0116 Mass (g) 90 Classification of the Hazardous Non-dangerous goods Material Silicone gel, heat conductive fillerfrom S$149.90Min. 2 days
- Shin-Etsu Chemical High hardness heat radiation silicone TC-CGIt has excellent electrical characteristics such as electrical insulation. There is a reinforced type with glass cloth and polyamide film. In addition to sheets, there are cap-shaped and tube-shaped products that help reduce the creepage distance of transistors and the like. Most products are UL ... Read MoreThermal Conductivity (W/mk) (ISO 22007-2)1.7、(ASTME1530)1.9 Temperature Range (℃) -40~180 Density (g/cm3) 2.5 Hardness 90 Type General Color Light reddish brown Classification of the Hazardous Non-dangerous goods Specification Reinforcing layer: Glass cloth Flame Retardance V-0from S$59.99Min. 18 days
- Shin-Etsu Chemical Ultra-low hardness heat-radiating silicone sheet (double-sided adhesive) TC-CAS-10Achieved high cost performance and thermal conductivity. Very soft material with constant, good compressibility and stress relaxation. Most products are UL certified and have excellent flame retardancy. It has a low specific gravity and can be used in a wide temperature range.Temperature Range (℃) -40~150 Thermal resistance value (℃ / W) 1.15 Specific heat (J / g ・ k) 1.24 Thermal Conductivity (W/mk) 1.8 Density (g/cm3) 1.9 Hardness 10 Dimension (mm) 300×400 Color Gray Classification of the Hazardous Non-dangerous goods Structure Single layer Flame Retardance V-0 Dielectric Breakdown Voltage (kV) ≧30 Withstand Voltage (V) ≧30from S$389.90Min. 18 days
- Shin-Etsu Chemical Low hardness heat-radiating silicone rubber sheetA low-hardness heat-dissipating silicone pad that achieves both high thermal conductivity and electrical insulation through its unique polymer technology and filler compounding technology. Heat countermeasures for various electronic devices installed in laptop computers, LED lighting, hybrid vehi... Read MoreHardness (Asker C) 10 Sheet Size (mm) 300×400 Classification of the Hazardous Non-dangerous goods Structure Single layer Flame Retardance V-0from S$229.90Min. 18 days
- BERGQUIST Ultra soft heat dissipation sheetIt is a very soft heat dissipation sheet. With greater flexibility, it fills gaps between air gaps, rough surface electronic devices and heat sinks. It also has excellent electrical insulation and flame retardancy. Heat dissipation inside the personal computer. Heat dissipation between heat sinks... Read MoreThermal Conductivity (W/mk) 1 Width (mm) 203 Length (mm) 406 Hardness 5(ASTMD2240) Classification of the Hazardous Non-dangerous goods Material Silicon Flame Retardance V-0(UL94)from S$119.90Min. 13 days
- Shin-Etsu Chemical Ultra-low hardness heat radiation silicone sheet (double-sided adhesive) TC-CAT-20Achieved high cost performance and thermal conductivity. Very soft material with constant, good compressibility and stress relaxation. Most products are UL certified and have excellent flame retardancy. It has a low specific density and can be used in a wide temperature range.Temperature Range (℃) -40~180 Thermal resistance value (℃ / W) 0.32 Specific heat (J / g ・ k) 0.83 Withstand Voltage (V) 11 Dielectric Breakdown Voltage (kV) 15 Hardness 20 Density (g/cm3) 3.2 Dimension (mm) 300×400 Thermal Conductivity (W/mk) 4.5 Color Gray Classification of the Hazardous Non-dangerous goods Structure Single layer Flame Retardance V-0from S$679.90Min. 18 days
- ATOM KOUSAN Conductive parts keeperBy applying adhesive urethane gel to the inner bottom of the case. hold parts. (Adhesive material is not used.) The urethane gel is conductive (surface resistance value 10 8 Ω), and the case is made of non-static ABS, preventing electrostatic breakdown of stored items and preventing dust from adh... Read MoreContainer Type Box typefrom S$19.99Min. 2 days
- Shin-Etsu Chemical Ultra-low hardness heat radiation silicone sheet (one-sided adhesive) TC-SP-1.7Achieved high cost performance and thermal conductivity. Very soft material with constant, good compressibility and stress relaxation. Most products are UL certified and have excellent flame retardancy. It has a low specific gravity and can be used in a wide temperature range.Thermal Conductivity (W/mk) (ISO 22007-2)1.5、(ASTM E1530)1.7 Temperature Range (℃) -40~150 Thermal resistance value (℃ / W) 1 Specific heat (J / g ・ k) 1.04 Withstand Voltage (V) 16 Hardness 2 Density (g/cm3) 2.3 Dielectric Breakdown Voltage (kV) 20 Dimension (mm) 300×400 Color Grey / reddish brown Classification of the Hazardous Non-dangerous goods Flame Retardance V-0 Structure compositefrom S$459.90Min. 18 days
- Taica Heat dissipation gel sheet lambda gel hardness 65 COH-4065LVC1.0.A very soft thermal gel. It has high thermal conductivity and exhibits excellent heat dissipation. With excellent flexibility and adhesiveness, it adheres to uneven surfaces and does not create an air layer on the contact surface. Has excellent electrical insulation and flame retardancy. It can b... Read MoreOperating Temperature Range (℃) -40~150 Tensile Strength (MPa) 0.1 Dielectric strength (kV / mm) 13.6 Elongation (%) 132 Volume Resistivity (Ωcm) 4.4×1012 Mass (g) 450 Trusco Part No. 583-8401 Hardness 65 (Penetration 1 / 10mm) Classification of the Hazardous Non-dangerous goods Material Silicone gel, heat conductive filler Flame Retardance V-0from S$289.90Min. 16 days
- Shin-Etsu Chemical High hardness heat radiation silicone TC-BGIt has excellent electrical characteristics such as electrical insulation. There is a reinforced type with glass cloth and polyamide film. In addition to sheets, there are cap-shaped and tube-shaped products that help reduce the creepage distance of transistors and the like. Most products are UL ... Read MoreThermal Conductivity (W/mk) (ISO 22007-2)7.3、(ASTME1530)5 Temperature Range (℃) -40~180 Density (g/cm3) 1.5 Hardness 90 Type High thermal conductivity Classification of the Hazardous Non-dangerous goods Specification Reinforcing layer: Glass cloth Flame Retardance V-0 Color Whitefrom S$279.90Min. 18 days
- SAKASE CHEMICAL Tack carrierThe low outgassing adhesive sheet is made of non-silicone and does not transfer or transfer the adhesive component. The adhesive strength and elasticity of the sheet mitigates impact and protects and holds mounted items safely. A variety of adhesive strengths are available for a variety of mounte... Read MoreMass (g) 26from S$38.99Min. 17 days
- Shin-Etsu Chemical Low hardness heat radiation silicone sheet (double-sided adhesive) TC-TXS2It has excellent elasticity, adheres well to heat-generating parts, and exhibits a high heat dissipation effect. It can be easily attached to and detached from the heat-generating part and temporarily fixed, and has excellent workability. Most products are UL certified and have excellent flame re... Read MoreTemperature Range (℃) -40~180 Thermal resistance value (℃ / W) 0.35 Specific heat (J / g ・ k) 0.83 Withstand Voltage (V) 17 Hardness 20 Dielectric Breakdown Voltage (kV) 21 Density (g/cm3) 3.1 Thermal Conductivity (W/mk) 3.3 Dimension (mm) 300×400 Color Gray Classification of the Hazardous Non-dangerous goods Structure Single layer Flame Retardance V-0from S$769.90Min. 18 days
- Shin-Etsu Chemical Ultra-low hardness heat dissipation silicone sheet (double-sided adhesive) TC-SPAAchieved high cost performance and thermal conductivity. Very soft material with constant, good compressibility and stress relaxation. Most products are UL certified and have excellent flame retardancy. It has a low specific gravity and can be used in a wide temperature range.Thermal Conductivity (W/mk) (ISO 22007-2)2.3、(ASTM E1530)3 Temperature Range (℃) -40~150 Thermal resistance value (℃ / W) 0.42 Specific heat (J / g ・ k) 0.94 Density (g/cm3) 2.4 Dimension (mm) 300×400 Hardness 4 Color Gray Classification of the Hazardous Non-dangerous goods Structure Single layer Flame Retardance V-0from S$339.90Min. 18 days
- Shin-Etsu Chemical High hardness heat radiation silicone TC-EGIt has excellent electrical characteristics such as electrical insulation. There is a reinforced type with glass cloth and polyamide film. In addition to sheets, there are cap-shaped and tube-shaped products that help reduce the creepage distance of transistors and the like. Most products are UL ... Read MoreThermal Conductivity (W/mk) (ISO 22007-2)3.1、(ASTME1530)4.5 Temperature Range (℃) -40~180 Density (g/cm3) 3.1 Dimension (mm) 300×400 Relative Permittivity, 50Hz 6.5、(1kHz)6.5、(MHz)6.4 Hardness 95 Type High thermal conductivity Classification of the Hazardous Non-dangerous goods Color Pale blue Specification Reinforcing layer: Glass cloth Flame Retardance V-0from S$159.90Min. 18 days
- Shin-Etsu Chemical Ultra-low hardness heat radiation silicone rubber sheetAn ultra-low hardness heat-dissipating silicone pad that achieves both high thermal conductivity and electrical insulation through our unique polymer technology and filler compounding technology. Heat dissipation of LED, heat measures for hybrid cars, electric cars, laptop computers, power suppli... Read MoreDielectric Breakdown Voltage (kV/mm) 20 Density (g/cm3) 3.2/23℃ Sheet Size (mm) 300×400 Hardness (Asker C) 40 Thermal Conductivity (W/mk) 5.2 Color Light purple Classification of the Hazardous Non-dangerous goods Structure Single layer Flame Retardance V-0from S$699.90Min. 18 days
- Shin-Etsu Chemical Heat radiation silicone tube typeThermal Conductivity (W/mk) (ISO 22007-2)0.8、(ASTME1530)1.1 Thickness (mm) 0.45 Volume Resistivity (MΩ.m) 1 Thermal resistance value (℃ / W) 1.7 Elongation (%) 110 Dielectric Breakdown Voltage (kV) 15 Density (g/cm3) 2.2 Relative Permittivity, 50Hz 4.8、(1kHz)4.8、(1MHz)4.7 Tensile Strength (MPa) 5.7 Tear Strength (kN/m) 8 Hardness 80 Withstand Voltage (kV) 9 Color Dark blue Type General, tube Classification of the Hazardous Non-dangerous goods Flame Retardance V-0from S$279.90Min. 18 days
- Shin-Etsu Chemical Low-hardness heat-radiating silicone sheet (double-sided adhesive) TC-TXSIt has excellent elasticity, adheres well to heat-generating parts, and exhibits a high heat dissipation effect. It can be easily attached to and detached from the heat-generating part and temporarily fixed, and has excellent workability. Most products are UL certified and have excellent flame re... Read MoreTemperature Range (℃) -40~180 Thermal resistance value (℃ / W) 0.4 Specific heat (J / g ・ k) 0.83 Withstand Voltage (V) 18 Thermal Conductivity (W/mk) 2.1 Dielectric Breakdown Voltage (kV) 20 Density (g/cm3) 3.1 Dimension (mm) 300×400 Hardness 45 Color Gray Classification of the Hazardous Non-dangerous goods Structure Single layer Flame Retardance V-0from S$679.90Min. 18 days
- Shin-Etsu Chemical Low-hardness heat-radiating silicone sheet (one-sided adhesive) TC-TXEIt has excellent elasticity, adheres well to heat-generating parts, and exhibits a high heat dissipation effect. It can be easily attached to and detached from the heat-generating part and temporarily fixed, and has excellent workability. Most products are UL certified and have excellent flame re... Read MoreTemperature Range (℃) -40~180 Thermal resistance value (℃ / W) 0.48 Specific heat (J / g ・ k) 0.83 Hardness 20 Withstand Voltage (V) 20 Dielectric Breakdown Voltage (kV) 21 Density (g/cm3) 3.1 Thermal Conductivity (W/mk) 3.3 Dimension (mm) 300×400 Color Light blue / grey Classification of the Hazardous Non-dangerous goods Flame Retardance V-0 Structure compositefrom S$769.90Min. 18 days
- Shin-Etsu Chemical High-hardness heat-radiating silicone (with one-sided adhesive) TC-CGIt has excellent electrical characteristics such as electrical insulation. There is a reinforced type with glass cloth and polyamide film. In addition to sheets, there are cap-shaped and tube-shaped products that help reduce the creepage distance of transistors and the like. Most products are UL ... Read MoreTemperature Range (℃) -40~180 Classification of the Hazardous Non-dangerous goods Flame Retardance V-0from S$97.99Min. 18 days
- Shin-Etsu Chemical Heat dissipation silicone cap typeElongation (%) 100 Thermal Conductivity (W/mk) 2 Density (g/cm3) 2.9 Tensile Strength (MPa) 3 Volume Resistivity (MΩ.m) 35 Tear Strength (kN/m) 6 Relative Permittivity, 50Hz 6.4、(1kHz)6.3、(1MHz)6.2 Hardness 75 Type High thermal conductivity, cap Classification of the Hazardous Non-dangerous goods Flame Retardance V-0from S$539.90Min. 18 days
- Shin-Etsu Chemical Ultra-low hardness heat radiation silicone sheet (double-sided adhesive) TC-CAB-30Achieved high cost performance and thermal conductivity. Very soft material with constant, good compressibility and stress relaxation. Most products are UL certified and have excellent flame retardancy. It has a low specific gravity and can be used in a wide temperature range.Temperature Range (℃) -40~150 Thermal resistance value (℃ / W) 0.64 Thickness (mm) 1 Specific heat (J / g ・ k) 1.13 Withstand Voltage (V) 11 Density (g/cm3) 2.2 Thermal Conductivity (W/mk) 2.3 Dielectric Breakdown Voltage (kV) 22 Hardness 30 Dimension (mm) 300×400 Color Light reddish brown Classification of the Hazardous Non-dangerous goods Structure Single layer Flame Retardance V-0from S$279.90Min. 18 days
- Shin-Etsu Chemical Panel board Mr. heat radiation silicon sheetJust by sticking it on the control panel, you can suppress the temperature rise and bring it closer to the outside air temperature (factory temperature). Since a cooler for the control panel is not required, it prevents foreign substances such as metal, dust, dust, and oil mist from entering from... Read MoreThermal Emissivity (Heat radiation layer) 0.85 < Classification of the Hazardous Non-dangerous goods
- Shin-Etsu Chemical Ultra-low hardness heat-radiating silicone sheet (double-sided adhesive) TC-CAS-30Achieved high cost performance and thermal conductivity. Very soft material with constant, good compressibility and stress relaxation. Most products are UL certified and have excellent flame retardancy. It has a low specific gravity and can be used in a wide temperature range.Temperature Range (℃) -40~150 Thermal resistance value (℃ / W) 0.87 Thickness (mm) 1 Specific heat (J / g ・ k) 1.24 Thermal Conductivity (W/mk) 1.8 Density (g/cm3) 1.9 Withstand Voltage (V) 10 Dielectric Breakdown Voltage (kV) 22 Hardness 30 Dimension (mm) 300×400 Color Gray Classification of the Hazardous Non-dangerous goods Structure Single layer Flame Retardance V-0from S$229.90Min. 18 days
- Shin-Etsu Chemical Heat dissipation silicone cap typeThermal Conductivity (W/mk) (ISO 22007-2)0.8、(ASTME1530)1.1 Volume Resistivity (MΩ.m) 1 Elongation (%) 110 Density (g/cm3) 2.2 Relative Permittivity, 50Hz 4.8、(1kHz)4.8、(1MHz)4.7 Tensile Strength (MPa) 5.7 Tear Strength (kN/m) 8 Hardness 80 Color Dark blue Classification of the Hazardous Non-dangerous goods Flame Retardance V-0from S$459.90Min. 18 days
- Shin-Etsu Chemical Heat dissipation silicone cap typeThermal Conductivity (W/mk) (ISO 22007-2)1.8、(ASTME1530)1.5 Elongation (%) 100 Density (g/cm3) 2.6 Volume Resistivity (MΩ.m) 3.2 Tensile Strength (MPa) 3.2 Relative Permittivity, 50Hz 6 Hardness 88 Tear Strength (kN/m) 9.8 Type Medium heat conduction, cap Classification of the Hazardous Non-dangerous goods Color Reddish brown Flame Retardance V-0from S$459.90Min. 18 days
- Sunhayato Hardens Heat Dissipation SiliconeA one-component room temperature curing type silicone with high thermal conductivity that hardens and dissipates heat. Simply apply between the CPU and heatsink to improve thermal conductivity and secure. It has an appropriate viscosity and is excellent in workability.Dielectric Constant (1MHz)4.1 Curing Conditions (hr/℃)72/25・(hr/℃)24/25 Quantity of the Hazardous 0.009L Thermal Conductivity (W/mk) 0.92 Volume Resistivity (Ωcm) 1.0×1015 Tack Free Time (Minutes) 20 Trusco Part No. 327-5329 Viscosity (Pa s) 85~108 Capacity (mL) 9 Classification of the Hazardous Designated combustibles Name of The Hazardous Flammable liquids Appearance White paste
- 3M Hyper Soft Heat Dissipation Sheet 5578HAn acrylic heat conductive sheet that achieves a heat resistant temperature of 130 ° C. Oil bleeding during compression is unlikely to occur. High thermal conductivity is high, and it has excellent shape followability and adhesion to the adherend, so a high thermal conductivity effect can be obta... Read MoreVolume Resistivity (Ωcm) 1.7×1012 Heat Resistance Temperature (℃) 130 Dielectric strength (kV / mm) 19 Thermal Conductivity (W/mk) 3.5 Hardness (Asker C) 38 Base Material Acrylic Classification of the Hazardous Non-dangerous goods Flame Retardance UL94 V-0 Color Whitefrom S$119.90Min. 3 days
Filter by categories