All Category

IC Extractors

View : Grid List
Filter

11 Item(s)

Set Ascending Direction
  1. PC Board Connector Extractor
    ENGINEER PC Board Connector Extractor
    The precision-machined tip securely holds the board connector, allowing the connector to be pulled out vertically and smoothly without worrying about the housing being scratched or broken. Precision-advanced design that allows reliable insertion and removal of straight-type and right-angle-type b... Read More
    Outer Dimensions (mm)  112×34  Mass (g)  26  Trusco Part No.  302-7228 
    Rating:
    91%
    from S$15.99
    Min. 2 days
  2. Without IC
    MonotaRO Without IC
    The IC can be inserted vertically and the pins can be pulled out at the same time. By tightening the knurled screw, the sandwiched IC is securely held as it is. * Completely remove the solder from the IC before starting work. * Do not apply excessive force as it may damage the IC and the board.
    Overall Length (mm)  125  Extractable IC (Pin Number)  8~42  Mass (g)  35 
    Rating:
    65%
    from S$15.99
    Min. 2 days
  3. PLCC drawing jig
    Sunhayato PLCC drawing jig
    It can be easily operated in either the vertical or horizontal direction. For pulling out PLCC type IC For pulling out the pin connector
    Suitable IC  PLCC IC32 to 160 pins  Applicable Width (mm)  Pin connector 10-50  Trusco Part No.  385-9673 
    from S$27.99
    Min. 2 days
  4. DIP IC extraction jig
    Sunhayato DIP IC extraction jig
    It can be pulled out lightly with the operation of one finger. It can be easily operated in either the vertical or horizontal direction. For pulling out DIP type IC
    Rating:
    100%
    from S$28.99
    Min. 2 days
  5. IC Extractor
    ENGINEER IC Extractor
    Tighten the knurled screw to securely hold the sandwiched IC.
    Outer Dimensions (mm)  125×60  Trusco Part No.  302-7210  Mass (g)  32  Extractable IC (Pin Number)  8~42 
    Rating:
    72%
    from S$22.99
    Min. 2 days
  6. IC extraction jig
    Sunhayato IC extraction jig
    It can be pulled out speedily without damaging the IC and IC socket. It can be pulled out lightly with the operation of one finger. It can be easily operated in either the vertical or horizontal direction.
    IC Width (inch)  0.3 
    from S$28.99
    Min. 2 days
  7. IC extraction jig
    Sunhayato IC extraction jig
    Pull out the SOP IC without damaging it. Extraction jig for KEL SOC01-044 socket (JEITA standard EDR-7320 compliant, 1.27mm pitch 600mil SOP44 pin). It can be pulled out safely and securely with one finger in either the horizontal or vertical direction. To remove the pulled out IC, press the trig... Read More
    Suitable for  KEL SOC01-044 socket  Dimensions, Width W x Length L x Thickness (mm)  71×134×20  Mass (g)  75 
    from S$49.99
    Min. 5 days
  8. IC extractor
    HAKKO IC extractor
    Suitable for  HAKKO 485  Trusco Part No.  849-8568 
    from S$18.99
    Min. 21 days
  9. IC extraction tool
    AS ONE IC extraction tool
    As ONE Part Number  63-3110-59 
    from S$4.79
    Min. 2 days
  10. Extraction jig
    SUMIKO TEC Extraction jig
    A pull-out jig exclusively for waterproof connectors. For bath appliances, toilet cleaners, water heaters, and outdoor motors.
    from S$219.90
    Min. 63 days
  11. IC insertion jig
    Sunhayato IC insertion jig
    The DIP IC is securely inserted just by pushing the push lever. The mounting metal guide is conductive to prevent electrostatic damage. It can be inserted securely just by pushing the push lever. For inserting DIP type IC. For pulling out PCLL type IC. For pulling out the pin connector.
    Discontinued
View : Grid List
Filter

11 Item(s)

Set Ascending Direction