PRICE DOWN
Toggle Nav
My Cart
Search
Advanced Search
All Category
All Category
Menu
Account

Tools and Equipments for Circuit Board

Board peripheral tools are tools for creating and maintaining boards for electrical products. There are a wide variety of types such as kits that can remove board mounting components, nippers for fine work, and machines that cut the board into perforations. The board itself may be handled. Nippers use special alloys, tungsten, etc. to improve cutting accuracy, and also support ESD noise. Substrate perforation cutters are suitable for low-volume production products. In addition, there are many types such as tools for extracting connection terminals and tools for bending lead wires.

Other Related Pages

  1. dust blower for pc
  2. solder pin pusher
  3. air curtain blower
  4. precise tooling
View : Grid List
Filter

Items 1 - 40 of 180

Page
Set Ascending Direction
  1. Tool Clip Circuit Board Holder
    MonotaRO Tool Clip Circuit Board Holder
    If you fix it with a clip, you can use both hands freely, which is convenient. As a convenient tool for soldering work. * Do not use for any other purpose. * When fixing the clip, it may be deformed, so be careful not to overtighten it. * The clip in the middle can be moved to the left or right. ... Read More
    Width (mm)  125 
    Rating:
    84%
    (148)
    from S$15.99
    Min. 2 days
  2. Jet Blow (Air Dust Blower)
    HOZAN (HOZAN TOOL INDUSTRIAL) Jet Blow (Air Dust Blower)
    Dust is blown off at once with a powerful blow.
    Trusco Part No.  298-3214  Overall Length (mm)  134  Mass (g)  40  Material  Natural rubber, NBR mixed  Pump Capacity (mL)  86 
    Rating:
    84%
    (11)
    from S$13.99
    Min. 2 days
  3. Jumbo Hurricane
    UN Jumbo Hurricane
    The compressed air jetted from the rubber ball blows away dust and dirt. It's palm-sized, so it's convenient to carry.
    Rating:
    91%
    (20)
    from S$12.99
    Min. 2 days
  4. Octopus clamp kit
    MonotaRO Octopus clamp kit
    With a large lens (2x), you can clearly see small objects. Since you can use both hands freely, you can work efficiently. As an auxiliary tool for each work * Please assemble and use by yourself. * Do not look directly at the light with the lens.
    Included Accessories  4 clip arms, 1 lens arm, 1 magnet arm  Arm Length (mm)  165  Base Dimensions (mm)  40×40×15 
    Rating:
    82%
    (28)
    from S$13.99
    Min. 2 days
  5. Dust Blower
    HOZAN (HOZAN TOOL INDUSTRIAL) Dust Blower
    Dust is blown off at once with compressed air. It has a function to switch between strong and weak compression, and a function to prevent dust from being sucked in (backflow) from the air outlet. You can also blow deep parts with the extension nozzle. The short nozzle that does not shake easily i... Read More
    Mass (g)  45  Trusco Part No.  818-2598  RoHS directive (corresponding to 10 substances)  Correspondence  Material  Natural rubber 
    Rating:
    93%
    (8)
    from S$24.99
    Min. 2 days
  6. Crimp Pin Removal Tool
    ENGINEER Crimp Pin Removal Tool
    Ideal for extracting connection terminals inserted in the housing * Please note that it may not be possible to remove it depending on the condition of the terminals. Do not use for terminals that do not match the size. There is a risk of damaging the pins.
    Dimension A (mm)  12  Dimension C (mm)  21  Dimension B (mm)  64  RoHS directive (corresponding to 10 substances)  Correspondence  Surface Treatment  Nickel plating  Material  SUS303G/C3604 
    Rating:
    98%
    (13)
    from S$28.99
    Min. 2 days
  7. PC Board Connector Extractor
    ENGINEER PC Board Connector Extractor
    The precision-machined tip securely holds the board connector, allowing the connector to be pulled out vertically and smoothly without worrying about the housing being scratched or broken. Precision-advanced design that allows reliable insertion and removal of straight-type and right-angle-type b... Read More
    Outer Dimensions (mm)  112×34  Mass (g)  26  Trusco Part No.  302-7228 
    Rating:
    91%
    (7)
    from S$15.99
    Min. 2 days
  8. IC Foam
    ENGINEER IC Foam
    Protects CMOS ICs, etc. from static electricity damage during transportation and carrying. Made of polyethylene mixed with carbon black and fatty acid ester.
    Thickness (mm)  10  Surface Resistance (Ω)  5 × 10 6 or less  RoHS directive (corresponding to 10 substances)  Correspondence  Type  IC form 
    Rating:
    96%
    (5)
    from S$2.49
    Min. 2 days
  9. Stainless steel probe
    HOZAN (HOZAN TOOL INDUSTRIAL) Stainless steel probe
    The tip is heat-treated and does not easily deform. For checking soldering, correcting patterns, removing adhesives, tapes, and electronic components.
    Rating:
    85%
    (4)
    from S$9.89
    Min. 2 days
  10. Blower Brush
    UN Blower Brush
    The compressed air jetted from the rubber ball blows away dust and dirt with a brush. By pulling out the brush and operating it, you can blow even more powerful compressed air. Work to blow dust and dirt off a computer from precision equipment
    from S$8.59
    Min. 2 days
  11. Surface Mount Component Removal Kit
    Sunhayato Surface Mount Component Removal Kit
    Whether it is a surface mount multi-layer board or a multi-pin IC or connector, you can easily remove the surface mount parts with just one soldering iron you have. The dedicated flux is an RMA (halogen-free) type that is friendly to the environment and parts. Also, since it is a high viscosity t... Read More
    Rating:
    83%
    (8)
    from S$79.99
    Min. 2 days
  12. Without IC
    MonotaRO Without IC
    The IC can be inserted vertically and the pins can be pulled out at the same time. By tightening the knurled screw, the sandwiched IC is securely held as it is. * Completely remove the solder from the IC before starting work. * Do not apply excessive force as it may damage the IC and the board.
    Overall Length (mm)  125  Extractable IC (Pin Number)  8～42  Mass (g)  35 
    Rating:
    65%
    (4)
    from S$15.99
    Min. 2 days
  13. Spring Hook
    HOZAN (HOZAN TOOL INDUSTRIAL) Spring Hook
    Simple stainless steel spring hook
    Overall Length (mm)  200  Handle Diameter (Φmm)  3  Trusco Part No.  469-7090  Mass (g)  9  RoHS directive (corresponding to 10 substances)  Correspondence  Material  Stainless steel 
    Rating:
    72%
    (5)
    from S$9.19
    Min. 2 days
  14. Hurricane Blower M
    UN Hurricane Blower M
    The compressed air jetted from the rubber ball blows away dust and dirt. It's palm-sized, so it's convenient to carry. Work to blow dust and dirt off a computer from precision equipment
    Mass (g)  28  Dimension (mm)  Total length 111 × 45 
    Rating:
    70%
    (2)
    from S$8.59
    Min. 2 days
  15. Crimp Pin Removal Tool
    ENGINEER Crimp Pin Removal Tool
    The built-in safety spring houses the ejector pin inside the sleeve, minimizing impact and deformation when dropped. For removing the pins of the connector.
    Mass (g)  20  Overall Length (mm)  62  RoHS directive (corresponding to 10 substances)  Correspondence  Material  Stainless steel 
    Rating:
    72%
    (5)
    from S$33.99
    Min. 2 days
  16. PLCC drawing jig
    Sunhayato PLCC drawing jig
    It can be easily operated in either the vertical or horizontal direction. For pulling out PLCC type IC For pulling out the pin connector
    Suitable IC  PLCC IC32 to 160 pins  Applicable Width (mm)  Pin connector 10-50  Trusco Part No.  385-9673 
    from S$27.99
    Min. 2 days
  17. DIP IC extraction jig
    Sunhayato DIP IC extraction jig
    It can be pulled out lightly with the operation of one finger. It can be easily operated in either the vertical or horizontal direction. For pulling out DIP type IC
    Rating:
    100%
    (2)
    from S$28.99
    Min. 2 days
  18. ESD tray
    HOZAN (HOZAN TOOL INDUSTRIAL) ESD tray
    For temporary storage of electronic components, classification, movement within the workplace, etc. The same variety can be nested (just layered). Temporary storage of electronic parts, classification, movement within the workplace, etc.
    Surface Resistance (Ω)  104～10  Outer dimensions, Width W x Height H x Depth D (mm)  192×25×256  Mass (g)  85  RoHS directive (corresponding to 10 substances)  Correspondence  Material  PP (with carbon) 
    Rating:
    100%
    (1)
    from S$44.99
    Min. 2 days
  19. Blower
    TSK Blower
    For cleaning mirrors, lenses, displays, etc.
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$11.99
    Min. 2 days
  20. IC Extractor
    ENGINEER IC Extractor
    Tighten the knurled screw to securely hold the sandwiched IC.
    Outer Dimensions (mm)  125×60  Trusco Part No.  302-7210  Mass (g)  32  Extractable IC (Pin Number)  8～42 
    Rating:
    72%
    (5)
    from S$22.99
    Min. 2 days
  21. Tool clipper
    TOOL TOOL Tool clipper
    Fixed by sandwiching it with a clip. It can be conveniently used for soldering, hobby, precision work, etc.
    Width (mm)  130  Magnification (times)  - 
    Rating:
    64%
    (9)
    from S$25.99
    Min. 2 days
  22. Spring hook
    ENGINEER Spring hook
    Ideal for mounting, removing, and adjusting coil springs, which are often used in electronic and precision equipment.
    Overall Length (mm)  215  Shank Diameter (Φmm)  3  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    100%
    (2)
    from S$7.69
    Min. 2 days
  23. blow
    HOZAN (HOZAN TOOL INDUSTRIAL) blow
    Ideal for blowing in deep places with extension nozzles. The nozzle is a telescopic rod type.
    Pump Capacity (mL)  69  Mass (g)  42  Material (Brush Part)  Pig hair  Trusco Part No.  370-8527 
    Rating:
    20%
    (1)
    from S$28.99
    Min. 2 days
  24. Contact Probe 1.37Ⅲ Series
    KITA Manufacturing Contact Probe 1.37Ⅲ Series
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$2.99
    Min. 2 days
  25. ESD Foam
    HOZAN (HOZAN TOOL INDUSTRIAL) ESD Foam
    As a cushioning material for substrates that are sensitive to static electricity. Ideal for storing discrete components and cushioning materials for substrates that are sensitive to static electricity. Uses a conductive foam material that maintains moderate hardness.
    Surface Resistance (Ω)  1 × 10 6 or less  RoHS directive (corresponding to 10 substances)  Correspondence  Type  IC form 
    Rating:
    78%
    (9)
    from S$9.19
    Min. 2 days
  26. Blower brush with cap
    UN Blower brush with cap
    Comes with a cap to prevent the brush from getting dirty while carrying. The cap is integrally molded with the sliding pipe built into the blower, so it will not be lost. If you operate the blower with the cap closed, you can inject only compressed air. For cleaning optical products, etc.
    Material (Brush Part)  Made of nylon  Bristle Length (mm)  24 
    from S$9.19
    Min. 2 days
  27. IC extraction jig
    Sunhayato IC extraction jig
    It can be pulled out speedily without damaging the IC and IC socket. It can be pulled out lightly with the operation of one finger. It can be easily operated in either the vertical or horizontal direction.
    IC Width (inch)  0.3 
    from S$28.99
    Min. 2 days
  28. Tool clipper (dish plate type)
    TSK Tool clipper (dish plate type)
    Since you can use both hands freely, you can work accurately and efficiently. It is very convenient to work by sandwiching it with a clip as an auxiliary tool (third hand).
    from S$27.99
    Min. 2 days
  29. ESD Circuit Board Holder
    HOZAN (HOZAN TOOL INDUSTRIAL) ESD Circuit Board Holder
    F-36 / 37 can be placed on a small board or a board with parts. F-37 has better heat resistance than F-36. F-33 can be nested and has a cleaner liquid outlet.
    Rating:
    80%
    (2)
    from S$979.90
    Min. 2 days
  30. Contact probe 1.0Ⅲ series
    KITA Manufacturing Contact probe 1.0Ⅲ series
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$2.99
    Min. 2 days
  31. Contact probe 1.0II series
    KITA Manufacturing Contact probe 1.0II series
    RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    80%
    (1)
    from S$2.99
    Min. 6 days
  32. Receptacle for contact probe 1.37III series
    KITA Manufacturing Receptacle for contact probe 1.37III series
    from S$1.39
    Min. 6 days
  33. Stand magnifier with clip
    TRUSCO Stand magnifier with clip
    Convenient to use both hands with a clip. It is a universal type that can be freely used, making it ideal for detailed work and inspections. Assembling and inspection of parts.
    Magnification  2.5 times  Width (mm)  Work 120-200  Trusco Part No.  250-9113  Lens Diameter (Φmm)  65  Type  Stand loupe  Material (Lens)  Glass  Dimensions, Width W x Depth D x Height H (mm)  270×55×200  Mass (g)  530  Base Dimensions, Width W x Depth D x Height H (mm)  57×55×57 
    Rating:
    20%
    (2)
    from S$28.99
    Min. 2 days
  34. Receptacle for contact probe 1.0II series
    KITA Manufacturing Receptacle for contact probe 1.0II series
    RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    60%
    (1)
    from S$1.59
    Min. 6 days
  35. Contact probe K075 series
    KITA Manufacturing Contact probe K075 series
    RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    20%
    (1)
    from S$2.89
    Min. 5 days
  36. Tool clipper (with magnifier)
    TOOL TOOL Tool clipper (with magnifier)
    Magnification (times)  About 2  Included Accessories  With lens 
    Rating:
    40%
    (1)
    from S$25.99
    Min. 2 days
  37. Contact probe 0.38II series
    KITA Manufacturing Contact probe 0.38II series
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$7.79
    Min. 2 days
  38. Contact probe K039 series
    KITA Manufacturing Contact probe K039 series
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$6.19
    Min. 5 days
  39. Contact probe 2.03 series
    KITA Manufacturing Contact probe 2.03 series
    RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    20%
    (1)
    from S$9.19
    Min. 5 days
  40. Contact probe 1.37II series
    KITA Manufacturing Contact probe 1.37II series
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$2.89
    Min. 6 days
View : Grid List
Filter

Items 1 - 40 of 180

Page
Set Ascending Direction