Electric

The corrosion-resistant tip has good solder compatibility and lasts longer than the copper tip. The heater adopts a special double structure heater. The grip contains glass fiber and is strong against impact. The double insulation structure makes it difficult to transfer heat to your hands. Since... Read More

After turning on the power, press and hold the quick switch to start up with about 10 times the standard output. Comes with a heat-resistant cap that can be stored immediately after soldering. When the quick switch is turned on, it can be used for strong (terminal, cable, etc.) and as standard fo... Read More

A ceramic soldering iron whose temperature can be adjusted at hand. Accurately control the tip temperature. 70W high power heater also supports lead-free solder. Comes with a heat-resistant cap that can be stored immediately after use.

The iron tip, heat sensor, and integrated composite tip realize strong temperature recovery and reliable temperature accuracy. Space-saving vertical design for comfortable work. The angle of the iron holder can be adjusted according to the work. Temperature control function (Set temperature can b... Read More

A compact, lightweight, high-performance model that emphasizes workability. Uses a connector type heater, making it easy to replace the heater. The tip has a hard chrome-plated finish.

Large heat capacity model suitable for terminals and connectors Hard chrome finish, thick plated long life tip connector type, easy heater replacement

The successor to the WD1000G. It has become multifunctional and has a smaller and easier-to-use design. Versatile from assembly of in-vehicle boards that require heat to fine soldering.

A best-selling soldering iron that can be used by both beginners and professionals. Comes with an easy-to-use corrosion-resistant iron tip. A household outlet is also acceptable.

It can be used for a wide range of purposes, from simple repair of electrical products to repair of copper and stainless steel products and sheet metal. Uses a large copper tip with good thermal conductivity. It is also possible with a household outlet. Can be used for a wide range of purposes, f... Read More

Ideal for soldering electronic components! Excellent thermal conductivity. The LED informs you that the set temperature has been reached. Temperature compensation is possible with the CAL volume. Built-in temperature controller in the grip. You can easily set the temperature just by turning the d... Read More

It is a set product that includes the necessary items for using a soldering iron, and it is ready to work. Therefore, it is also recommended for beginners and beginners. Recommended for those who do DIY such as electronic work and model work.

When repairing solder, I attached a solder blotting wire, which was often requested. Excess solder can be absorbed. Remove and attach the solder, but with this set !! The best set for those who are soldering for the first time. *Please use HAKKO's dedicated iron holder.

With a large copper iron tip that can be processed with a file

Uses a ceramic heater for quick heat recovery and easy soldering. The tip is anti-oxidant processed, and the material is copper, which has good thermal conductivity, and it lasts a long time. For soldering electrical wiring * Do not use for any other purpose.

Long-life tip, red chip. Lightweight grip that emphasizes workability.

Uses a high-performance tubular ceramic heater. You can perform precise work with a sharp tip. The distance between the tip and grip is short, making it ideal for precision work.

You can quickly heat 130W by switching on. You can switch from 20W to 130W with the touch of a button. (Up to 30 seconds in a row) The heater is a ceramic heater. Soldering relays and connectors

Uses a newly developed tip with a large amount of heat storage. Ideal for soldering that requires a lot of heat. Excellent thermal conductivity. The T19 series has improved thermal conductivity by reviewing the appearance, design, and internal structure of the tip. By adopting this tip, a strong ... Read More

Includes soldering tip and solder. It can also be used as a fray for nylon tape.

When set to Hi, 200W of power is output, and it can be started up and used in about 10 seconds. Hi and Lo can be identified by the illuminance of the indicator lamp. The heater is a printed ceramic heater. Domestic product with high quality. Lo (20W) is ideal for soldering IC boards. Hi (200W) ca... Read More

Work efficiency can be improved by changing the color of the sleeve according to the shape and work content of the soldering iron tip of the lock type sleeve. * The tip is not included.

Digital type is now available in the analog type price range. Equipped with adjust mode, preset mode, and password function. Excellent cost performance, separate tip / heater * Mouse cap sold separately.

Since the amount of heat of the tip is large, it is ideal for continuous work. Easy-to-operate hand switch type (excluding 500W). It can be used for large sheet metal work and tin plate processing. * Tip: Nickel plating (not compatible with lead-free solder). * When using lead-free solder, the ti... Read More

Entry model of ceramic heater. Ideal for those who start making electronic circuits. Workability is improved with a 15mm slim grip. * Tip B type is an all-round type that can be used for any work. This shape is ideal for beginners who have difficulty finding a tip shape that suits their work.

By adopting a special double structure heater, the surface load can be reduced and the life of the iron tip can be extended. The comfortable wooden grip makes it easy to fit in your hand and is lightweight.

Copper iron tip that can be processed with a file Flat heater with good thermal efficiency

Since the amount of heat of the tip is large, it is ideal for continuous work. Easy-to-operate hand switch type (excluding 500W). It can be used for large sheet metal work and tin plate processing. * Tip: Nickel plating (not compatible with lead-free solder). * When using lead-free solder, the ti... Read More

Comes with a hand switch for easy operation. The tip is highly corrosion resistant and comes standard with iron-plated specifications that are compatible with lead-free solder. For sheet metal

You can quickly heat 130W by switching on. You can switch from 20W to 130W with the touch of a button. (Up to 30 seconds in a row) The heater is a ceramic heater. Soldering relays and connectors.

It is compact and lightweight, uses a flat heater, has a large heat storage unit, and can be used from small to large ones. It can be widely used for wiring assembly / repair, work / hobby, etc. * Tip: Nickel plating (not compatible with lead-free solder). * When using lead-free solder, the tip m... Read More

Uses a ceramic heater with excellent electrical insulation and thermal conductivity. Uses a trowel tip with a high volume that has a high heat storage effect. The temperature can be adjusted at hand. 70W high power heater specifications.

Soldering iron that can handle everything from repairing electrical products to sheet metal processing Uses a large copper tip with good heat conduction Since it is a copper tip, the tip can be processed with a file according to the work.

Two-stage switching type, strong (trigger ON / stable 90W) and standard (stable 15W). When you press the trigger switch, it starts up with about 10 times the output of the standard. Comes with a heat-resistant cap that can be stored immediately after soldering. Uses a high power heater with good ... Read More

Ideal for sheet metal and branding irons. Comes with a hand switch for easy operation. There are I type and J type. Please choose according to your work. The tip is highly corrosion resistant and comes standard with iron-plated specifications that are compatible with lead-free solder. For sheet m... Read More

With case

A handicraft trowel suitable for appliqués and art flowers. Easy to discipline Japanese dressmaking, stamping, etc. Appliques, art flowers, Japanese dressmaking, stamped pictures

It can be used for a wide range of purposes, from simple repair of electrical products to repair of copper and stainless steel products and sheet metal. Uses a large copper tip with good thermal conductivity. It is also possible with a household outlet. Can be used for a wide range of purposes, f... Read More

The thermal efficiency is excellent by setting the soldering iron heater output for HAKKO FX-888D and FX889 to 65W. * Overall length (mm) and mass (g) are values with tip B type.