All Category

Soldering Iron Related Supplies

View : Grid List
Filter

Items 1 - 40 of 916

Set Ascending Direction
  1. Φ5.0mm cord stopper (5 pieces)
    ESCO Φ5.0mm cord stopper (5 pieces)
    Esco Part No.  EA628RW-15 
    from S$5.49
    Min. 2 days
  2. Tweezers assembly
    HOZAN (HOZAN TOOL INDUSTRIAL) Tweezers assembly
    Suitable Model  HS-400/401 
    from S$89.99
    Min. 7 days
  3. Stand magnifier with clip
    MonotaRO Stand magnifier with clip
    You can work with both hands by holding the parts with clips. For assembling and inspecting small parts. * Do not look at strong light such as the sun or lights with a magnifying glass. * Do not leave the product in direct sunlight or in a place exposed to reflected light. * Wipe off any dirt on ... Read More
    Magnification (times)  Width (mm)  160  Lens Diameter (Φmm)  60  Type  Stand loupe  Material (Lens)  Glass  Height (mm)  185  Dimensions, Width W x Depth D x Height H (mm)  160×52×185  Mass (g)  310  Number of Clips 
    Rating:
    75%
    from S$17.99
    Min. 2 days
  4. Power controller
    goot (TAIYO ELECTRIC) Power controller
    It is effective when the soldering iron is overheated, such as when soldering a small printed circuit board. You can control the voltage of the electric iron from about 75 to 100V just by plugging it into an outlet. (Phase control) Controls the amount of heat of the electric trowel
    Rated Voltage (V)  100(AC50/60Hz)  Range of Use  100V 20 to 200W  Trusco Part No.  387-1410  Outer Dimensions, Width W x Length L x Height H (mm)  56×85×39  Mass (g)  75  Control Width  About 75-100V 
    Rating:
    85%
    from S$28.99
    Min. 2 days
  5. Heat Clip
    goot (TAIYO ELECTRIC) Heat Clip
    Protects parts from the heat of the soldering iron. The L type is convenient in narrow places.
    Material  Aluminum 
    Rating:
    93%
    from S$2.19
    Min. 2 days
  6. Ceramic Paper Filter
    HAKKO Ceramic Paper Filter
    Used for the filter pipe of the suction device
    Thickness (mm)  About 6  Size  Dimension (Φmm)  About 17 
    Rating:
    100%
    from S$10.99
    Min. 2 days
  7. Hot knife
    goot (TAIYO ELECTRIC) Hot knife
    It can also be used as a soldering iron because it comes with a folding iron stand, solder with solder, and a soldering iron tip.
    Voltage (V)  100  Rated Voltage  100V AC 50/60Hz  Heater  Nichrome heater 
    Rating:
    67%
    from S$19.99
    Min. 2 days
  8. Tip Sleeve
    HAKKO Tip Sleeve
    Suitable Soldering Iron  FM-2027F、M-2028  Suitable for  FM-203、FX-950、FX-951、FX-952  Type  Sleeve assembly 
    Rating:
    90%
    from S$7.69
    Min. 2 days
  9. Mini vice PP simple type
    MonotaRO Mini vice PP simple type
    It can be attached with a suction cup and can be worked with one touch. For soldering work, craft work, etc. * Hold the vise with your hand and turn the lever to fix it. * Please use a flat and smooth desk as the base. * If the base is wet, it cannot be fixed with a suction cup. * When heat is ap... Read More
    Clip Width (mm)  Up to 35  Dimensions, Width W x Depth D x Height H (mm)  60×60×70  Maximum Jaw Opening (mm)  25  Material  PP (main body), aluminum (opening) 
    Rating:
    54%
    from S$6.29
    Min. 2 days
  10. Mini vice
    goot (TAIYO ELECTRIC) Mini vice
    It can be easily fixed to the workbench by adopting a one-touch suction cup type base. Made of plastic.
    Dimensions, Width W x Depth D x Height H (mm)  80×90×70  Clip Width (mm)  Up to 35  Trusco Part No.  468-7281  Mass (g)  110 
    Rating:
    68%
    from S$9.19
    Min. 2 days
  11. Work table with HL
    goot (TAIYO ELECTRIC) Work table with HL
    You can work safely with a stable base. Two sets of large and small clips are included.
    Trusco Part No.  468-7311  Lens Diameter (Φmm)  90  Clip Width (mm)  Up to 200  Dimensions, Width W x Depth D x Height H (mm)  150×245×280  Magnification (times)  About 3  Mass (kg) 
    Rating:
    82%
    from S$57.99
    Min. 2 days
  12. Hot Cutter
    goot (TAIYO ELECTRIC) Hot Cutter
    You can easily cut curves that are difficult to process with scissors or a utility knife. Since the blade is double-edged, you can easily make sharp cuts and corrugated cuts. A chrome-plated tip that does not easily stick to debris.
    Length (mm)  205  Rated Voltage  100V AC 50/60Hz  Trusco Part No.  853-6823  Temperature (℃)  360  Heater  Nichrome heater  Voltage (V)  100  Power Consumption (W)  23 
    Rating:
    77%
    from S$21.99
    Min. 2 days
  13. Hot Sealer
    goot (TAIYO ELECTRIC) Hot Sealer
    It can be used for bonding nylon, vinyl, and polyethylene. Ideal for daily necessities, clothing and household stickers. The sealing capacity of the adhesive is up to 0.3 mm in total thickness when two sheets are stacked.
    Voltage (V)  100  Power Cable (m)  1.5  Included Accessories  One cellophane (70 x 300 mm)  Heater  Nichrome heater 
    Rating:
    87%
    from S$19.99
    Min. 2 days
  14. Gas Appliances for Cleaning Needle Set
    HOZAN (HOZAN TOOL INDUSTRIAL) Gas Appliances for Cleaning Needle Set
    Stainless wire for maintenance of nozzle holes, etc.
    RoHS directive (corresponding to 10 substances)  Correspondence  Material  Stainless steel  Dimension (mm)  Φ0.1×60、Φ0.4×90、Φ0.7×90 
    Rating:
    79%
    from S$2.89
    Min. 2 days
  15. Replacement Cutter Unit
    goot (TAIYO ELECTRIC) Replacement Cutter Unit
    It is a replacement tip.
    Blade Width (mm)  Length (mm)  87 
    Rating:
    92%
    from S$6.89
    Min. 2 days
  16. Replace Nozzle (N1 Series)
    HAKKO Replace Nozzle (N1 Series)
    Nozzle for solder remover FM-2024 / FM204 * If you order by cash on delivery, it may be shipped the next day or later.
    Rating:
    70%
    from S$57.99
    Min. 2 days
  17. Cellophane
    goot (TAIYO ELECTRIC) Cellophane
    Size  70×300mm  Specification  For HS-40 / 50 
    Rating:
    93%
    from S$4.29
    Min. 2 days
  18. Power controller
    goot (TAIYO ELECTRIC) Power controller
    You can control the amount of light from the incandescent lamp and the amount of air from the ventilation fan at your fingertips. With ON-OFF switch
    Adjustable Range (%)  0~100  Power Cable (m)  1.8  Voltage (V)  100  Rated Voltage  100V AC 50/60Hz  Mass (g)  155  Dimensions, Width W x Depth D x Height H (mm)  40×25×125  Trusco Part No.  468-6942  Color  Black 
    Rating:
    87%
    from S$45.99
    Min. 2 days
  19. Cap Nut
    HAKKO Cap Nut
    Mass (g)  Trusco Part No.  367-8733  Suitable Model  No.984-01 
    Rating:
    90%
    from S$1.29
    Min. 2 days
  20. Metal storage case
    Nakajima Doko Metal storage case
    * Do not use for electric irons.
    Overall Length (mm)  285 
    Rating:
    73%
    from S$15.99
    Min. 2 days
  21. HAKKO 605 Soldering Iron Cover M
    HAKKO HAKKO 605 Soldering Iron Cover M
    A trowel cover with excellent heat resistance and heat insulation. Can be stored immediately after work.
    Trusco Part No.  469-1954  Mass (g)  20 
    Rating:
    93%
    from S$6.19
    Min. 2 days
  22. Heat Sink
    HOZAN (HOZAN TOOL INDUSTRIAL) Heat Sink
    Maximum Jaw Opening (mm)  Overall Length (mm)  70  Material  Aluminum 
    Rating:
    100%
    from S$5.69
    Min. 2 days
  23. Cotizer Ejector Ignition Unit (for 91)
    Nakajima Doko Cotizer Ejector Ignition Unit (for 91)
    Solder Executor Unit for Koterizer Auto Mini 91
    Trusco Part No.  305-9065  Suitable for  Coterizer Auto Mini 91  Mass (g) 
    Rating:
    100%
    from S$21.99
    Min. 2 days
  24. Soldering tip tool for gas torch & gas soldering iron 2200
    DREMEL Soldering tip tool for gas torch & gas soldering iron 2200
    Spare parts for soldering tip tools for Dremel gas tools (2000, 2200).
    Trusco Part No.  408-7615  Mass (g)  15 
    Rating:
    75%
    from S$15.99
    Min. 2 days
  25. Front Holder (Soldering Parts)
    HAKKO Front Holder (Soldering Parts)
    Suitable for  HAKKO 474、HAKKO 475  Trusco Part No.  828-3908 
    Rating:
    90%
    from S$7.19
    Min. 2 days
  26. Φ5.0mm cord stopper (5 pieces)
    ESCO Φ5.0mm cord stopper (5 pieces)
    Esco Part No.  EA628RW-5 
    Rating:
    80%
    from S$5.29
    Min. 2 days
  27. Styrofoam cutter
    RELIEF Styrofoam cutter
    Specification  Speed heating for about 10 seconds  Trusco Part No.  859-2968 
    from S$49.99
    Min. 2 days
  28. Styrofoam cutter
    RELIEF Styrofoam cutter
    Trusco Part No.  859-2969 
    Rating:
    90%
    from S$56.99
    Min. 2 days
  29. Temperature-controlled soldering iron HS-26 bit
    HOZAN (HOZAN TOOL INDUSTRIAL) Temperature-controlled soldering iron HS-26 bit
    RoHS directive (corresponding to 10 substances)  Correspondence  Specification  Separate heater 
    Rating:
    40%
    from S$12.99
    Min. 2 days
  30. Filter
    HAKKO Filter
    Mass (g)  10  Suitable Model  FR-400、FR-410 
    Rating:
    80%
    from S$21.99
    Min. 2 days
  31. With HL clip
    goot (TAIYO ELECTRIC) With HL clip
    You can work safely with a stable base.
    Lens Diameter (Φmm)  90  Trusco Part No.  468-7302  Mass (g)  550  Dimensions, Width W x Depth D x Height H (mm)  120×160×130  Clip Width (mm)  Up to 105  Magnification (times)  About 3 
    Rating:
    60%
    from S$28.99
    Min. 2 days
  32. Ejector Unit (for 90 Auto II)
    Nakajima Doko Ejector Unit (for 90 Auto II)
    Rating:
    87%
    from S$24.99
    Min. 2 days
  33. Tip for gas type
    MonotaRO Tip for gas type
    * This is a tip for MPT230 only. Do not install it on other models.
    Suitable Model  MPT230 
    Rating:
    80%
    from S$3.19
    Min. 2 days
  34. Rubber Wheels
    HOZAN (HOZAN TOOL INDUSTRIAL) Rubber Wheels
    Fine abrasive grains allow smooth work without clogging. Unlike sandpaper and sandpaper, it is gentle on the base material and gives a beautiful finish when removing rust and dirt on the surface. Compared to the paste type, the iron tip can be polished evenly and evenly. Oxidation film polishing ... Read More
    Abrasive Grain Size  #320  Trusco Part No.  274-1946  Dimension (mm)  50×25.5×20  Color  Black  RoHS directive (corresponding to 10 substances)  Correspondence  Material  Foam NBR 
    Rating:
    80%
    from S$10.99
    Min. 2 days
  35. Nut for CXR / PX2,5,6 / RX7 / TQ Series
    goot (TAIYO ELECTRIC) Nut for CXR / PX2,5,6 / RX7 / TQ Series
    Type  Replacement nut  Cable Length (m)  1.5  Suitable Model  PX-201  Trusco Part No.  390-2846  Mass (g) 
    Rating:
    100%
    from S$1.59
    Min. 2 days
  36. Heat Sink
    HAKKO Heat Sink
    A heat dissipation clip used when soldering heat-sensitive parts.
    Rating:
    40%
    from S$1.59
    Min. 2 days
  37. Cap nut N452, 920, 376-006
    HAKKO Cap nut N452, 920, 376-006
    Mass (g)  Suitable Model  N452、N452E、N453、N453E、FX-600、FX-8801  Trusco Part No.  367-8741 
    Rating:
    100%
    from S$1.29
    Min. 2 days
  38. Iron brush
    HAKKO Iron brush
    Suitable Model  my pen、my pen α  Mass (g)  Trusco Part No.  112-0458 
    from S$7.69
    Min. 2 days
  39. Heater 100V-300W
    HAKKO Heater 100V-300W
    Rating:
    80%
    from S$12.99
    Min. 2 days
  40. Fan unit with motor
    HAKKO Fan unit with motor
    Suitable for  HAKKO FV-310 
    Rating:
    100%
    from S$25.99
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 916

Set Ascending Direction