Soldering Irons
The soldering iron is a soldering iron required when soldering and joining metal. There are electric type, battery type and gas type, but the electric type has the most types. Since the gas type is cordless, it can be used in various places and the output can be adjusted. It can be used in a wide range from electrical repair to accessory repair. The power controller can control the voltage of the electric iron. A set of popular models, gas-type gas cylinders, and soldering iron tips suitable for soldering iron models are available.
Other Related Pages
HAKKO Soldering Iron REDThe corrosion-resistant tip has good solder compatibility and lasts longer than the copper tip. The heater adopts a special double structure heater. The grip contains glass fiber and is strong against impact. The double insulation structure makes it difficult to transfer heat to your hands. Since... Read MoreIncluded Accessories Simple trowel stand x 1 Power Input (V) AC100(50/60Hz)- goot (TAIYO ELECTRIC) Immediate Heating Soldering IronAfter turning on the power, press and hold the quick switch to start up with about 10 times the standard output. Comes with a heat-resistant cap that can be stored immediately after soldering. When the quick switch is turned on, it can be used for strong (terminal, cable, etc.) and as standard fo... Read MoreHighest Temperature (℃) 560/390 Trusco Part No. 364-2305 Power Consumption (W) 90/15 Power Input (V) AC100 Specification Strong / standard two-stage switching Mass (g) 65 Standard Iron Tip TQ-77RT-B Overall Length (mm) 210
- goot (TAIYO ELECTRIC) Temperature Controlled Soldering IronA ceramic soldering iron whose temperature can be adjusted at hand. Accurately control the tip temperature. 70W high power heater also supports lead-free solder. Comes with a heat-resistant cap that can be stored immediately after use.Overall Length (mm) 210 Temperature (℃) 250～450 Trusco Part No. 305-9693 Power Consumption (W) 70 Mass (g) 90 Included Accessories Solder tip (PX-2RT-B)
- HAKKO Standard Soldering Iron for Lead-free SolderThe iron tip, heat sensor, and integrated composite tip realize strong temperature recovery and reliable temperature accuracy. Space-saving vertical design for comfortable work. The angle of the iron holder can be adjusted according to the work. Temperature control function (Set temperature can b... Read MoreStation Mass (kg) 1.2 Mass (kg) 1.2 Soldering Iron Cable (m) 1.2 Soldering Iron Total Length (mm) 188 (with code removal / tip 2.4D) Resistance between Iron Tip and Ground (Ω) 2 or less Control Temperature (℃) 200～450 Station Output 24V Soldering Iron Leakage Voltage 2mV or less Soldering Iron Mass (g) 30 (with cord removal / tip 2.4D) Trusco Part No. 327-2711 Power Input (AC100V) 50/60Hz Soldering Iron Power Consumption 70W(24V) Power Consumption (W) 75 Station Dimensions (mm) 80(W)×130(H)×131(D) Temperature Accuracy No-load ripple temperature ± 5 ° C
- goot (TAIYO ELECTRIC) Ceramic soldering ironA compact, lightweight, high-performance model that emphasizes workability. Uses a connector type heater, making it easy to replace the heater. The tip has a hard chrome-plated finish.Standard Iron Tip PX-60RT-SB Power Input (V) AC100 Overall Length (mm) 205 Mass (g) 60
- goot (TAIYO ELECTRIC) Ceramic soldering ironLarge heat capacity model suitable for terminals and connectors Hard chrome finish, thick plated long life tip connector type, easy heater replacementInsulation Resistance (MΩ) 100 or more (500V DC) Voltage (V) 100 Power Cable (m) 1.5 Heater Ceramic heater Overall Length (mm) 268 Length (mm) 268 Rated Voltage 100V AC 50/60Hz
- HAKKO Hot Knife BladeTip Shape Corrosion-resistant iron-plated iron tip Mass (g) 40 Tip shape Corrosion resistant iron plating tip Trusco Part No. 367-8504 Suitable Soldering Iron 515
- Weller WT 1012G Solder StationThe successor to the WD1000G. It has become multifunctional and has a smaller and easier-to-use design. Versatile from assembly of in-vehicle boards that require heat to fine soldering.Dimensions, Width W x Depth D x Height H (mm) 150×130×101 Number of Channels 1 Output (W) 90(95) Mass (kg) 1.9 Temperature Resolution (℃) ±2 Power Supply 100V(50/60Hz) Temperature Control Range (℃) 50～450 Function Potential balance circuit, ESD-safe Temperature Accuracy ±9℃
-
- HAKKO HAKKO RED 100V-30W with flat plug BSB4A best-selling soldering iron that can be used by both beginners and professionals. Comes with an easy-to-use corrosion-resistant iron tip. A household outlet is also acceptable.Mass (kg) 0.16 Overall Length (mm) 207 Power Consumption (W) 30 Highest Temperature (℃) 420 Standard Iron Tip 501ST-T Power Input (V) AC100from S$12.99Min. 2 days
- HAKKO Tip / CHIP 0.5L TypeA tip for hot tweezers for CHIP that is convenient for removing tips and SOPs.Dimension (mm) 0.5 Type 0.5L type Mass (g) 100 Trusco Part No. 384-3980 Specification Compatible with lead-free solder Suitable Soldering Iron FX888from S$69.99Min. 2 days
- HAKKO Tip T12-1403 Spatula 21.2Type Spatula type Mass (g) 12 Trusco Part No. 294-6378 Specification SMD typefrom S$86.99Min. 2 days
- HAKKO HAKKO JUNIOR JL 100V-200W Flat PlugIt can be used for a wide range of purposes, from simple repair of electrical products to repair of copper and stainless steel products and sheet metal. Uses a large copper tip with good thermal conductivity. It is also possible with a household outlet. Can be used for a wide range of purposes, f... Read MoreTip shape L type Mass (kg) 0.6 Highest Temperature (℃) 510 Standard Iron Tip L type (359-T) Power Input (V) AC100 Power Consumption (W) 200 Overall Length (mm) 338 Trusco Part No. 849-7140from S$53.99Min. 5 days
- HAKKO Tip + T12-1004 + Tunnel + 9.5 x 15.8Specification SMD type Trusco Part No. 849-8179 Type Tunnel typefrom S$85.99Min. 2 days
-
-
- HAKKO Soldering Iron Replacement Tip T18 SeriesCompatible with lead-free solderSuitable Model FX8801-01、FX8802-02、FX600-01、FX600-02
- HAKKO Tip (T12 Lead Free Solder)* If you order by cash on delivery, it may be shipped the next day or later.
- HAKKO Temperature Controlled Soldering IronIdeal for soldering electronic components! Excellent thermal conductivity. The LED informs you that the set temperature has been reached. Temperature compensation is possible with the CAL volume. Built-in temperature controller in the grip. You can easily set the temperature just by turning the d... Read MoreTemperature Setting Range 200～500℃ Overall Length (mm) 233 (with tip B) Power Consumption (W) 50 Mass (g) 61 (with tip B) Power Input (V) AC100(50/60Hz) Set Contents Body, lock key Heater Ceramic heater Standard Iron Tip Type B (No.T18-B) Ripple Temperature (℃) ± 1 at no load
- BIGMAN Soldering Iron Set for Electronic Work with Large Iron StandIt is a set product that includes the necessary items for using a soldering iron, and it is ready to work. Therefore, it is also recommended for beginners and beginners. Recommended for those who do DIY such as electronic work and model work.Height (mm) (Soldering iron) 210 Dimensions, Height x Width (mm) (Table) 100 × 70 Power (W) 40 Cable Length (cm) About 140
- HAKKO Soldering iron setWhen repairing solder, I attached a solder blotting wire, which was often requested. Excess solder can be absorbed. Remove and attach the solder, but with this set !! The best set for those who are soldering for the first time. *Please use HAKKO's dedicated iron holder.
- HAKKO Tip for 900MOuter Diameter (Φmm) 6.5 Suitable Soldering Iron 928、937、701、936、933/934 Size M
- HAKKO Soldering Iron JuniorWith a large copper iron tip that can be processed with a filePower Input (V) AC100(50/60Hz)
- HAKKO Replacement Tip for PRESTOMass (g) 8 Suitable for Trowel / 980, 981, 984-01, 985-01
- MonotaRO Stand magnifier with clipYou can work with both hands by holding the parts with clips. For assembling and inspecting small parts. * Do not look at strong light such as the sun or lights with a magnifying glass. * Do not leave the product in direct sunlight or in a place exposed to reflected light. * Wipe off any dirt on ... Read MoreMagnification (times) 4 Width (mm) 160 Lens Diameter (Φmm) 60 Type Stand loupe Material (Lens) Glass Height (mm) 185 Dimensions, Width W x Depth D x Height H (mm) 160×52×185 Mass (g) 310 Number of Clips 2
- MonotaRO Soldering iron ceramic heater typeUses a ceramic heater for quick heat recovery and easy soldering. The tip is anti-oxidant processed, and the material is copper, which has good thermal conductivity, and it lasts a long time. For soldering electrical wiring * Do not use for any other purpose.Cable Length (m) 1.49 Power Consumption (W) 20 Main Unit Dimensions, Length (mm) 195 Iron Tip Size (mm) 0.5 Rated Voltage (V) AC100 Highest Temperature (℃) 500 Mass (g) 120 (including code) Insulation Resistance (MΩ) 500
- goot (TAIYO ELECTRIC) General Electric Soldering IronLong-life tip, red chip. Lightweight grip that emphasizes workability.Power Input (V) AC100 Voltage (V) 100 Heater Nichrome heater Cable Length (m) 1.5
- goot (TAIYO ELECTRIC) Soldering Iron for Precision Printed Circuit BoardUses a high-performance tubular ceramic heater. You can perform precise work with a sharp tip. The distance between the tip and grip is short, making it ideal for precision work.Mass (g) 43 Overall Length (mm) 186
- MonotaRO Soldering Iron Cordless Type Battery PoweredIt is cordless (using batteries) and you don't have to worry about power supply. A double safety switch that heats only when the switch is pressed. With a light, it is convenient for working in dimly lit areas. For assembling hobbies and electronic devices such as crafts. * Batteries are not ... Read MoreSuitable Battery Alkaline AA batteries x 4 Highest Temperature (℃) 550 Included Accessories Protective cap
- goot (TAIYO ELECTRIC) Power controllerIt is effective when the soldering iron is overheated, such as when soldering a small printed circuit board. You can control the voltage of the electric iron from about 75 to 100V just by plugging it into an outlet. (Phase control) Controls the amount of heat of the electric trowelRated Voltage (V) 100(AC50/60Hz) Range of Use 100V 20 to 200W Trusco Part No. 387-1410 Outer Dimensions, Width W x Length L x Height H (mm) 56×85×39 Mass (g) 75 Control Width About 75-100V
- HAKKO PRESTO (straight type)You can quickly heat 130W by switching on. You can switch from 20W to 130W with the touch of a button. (Up to 30 seconds in a row) The heater is a ceramic heater. Soldering relays and connectorsMass (g) 48 Power Input (V) AC100 (50/60Hz) Trusco Part No. 351-4196 Power Cable (m) 1.5 (with 2-core rubber cord flat plug) Type Straight Overall Length (mm) 205 Power Consumption (W) 20/130 (switch on)
- goot (TAIYO ELECTRIC) PX-2RT Series TipShank Diameter x Length (mm) Φ7×37 Suitable Model PX-201、PX-335、PX-342、PX-338 Mass (g) 9
-
- goot (TAIYO ELECTRIC) Battery-powered soldering ironIt can also be used in cars without a power source or in factories where gas type cannot be used. Soldering work can be done at any time with 3 AA batteries. Rechargeable batteries can also be used, making it economical. The LED on the front illuminates your work brightly. It reaches 350 ° C in a... Read MoreIncluded Accessories Tip (MSD-20HRT-B) Power Consumption (W) 6 Continuous Operating Time (minutes) Alkali: 40, nickel: 65 Trusco Part No. 855-2654 Specification Safe two-stage switch Set Contents Cap, tip, tip change tool Highest Temperature (℃) Alkaline nickel: 400 or more Overall Length (mm) 180
-
- goot (TAIYO ELECTRIC) Heat ClipProtects parts from the heat of the soldering iron. The L type is convenient in narrow places.Material Aluminum
- HAKKO Ceramic Paper FilterUsed for the filter pipe of the suction deviceThickness (mm) About 6 Size L Dimension (Φmm) About 17
- goot (TAIYO ELECTRIC) Hot knifeIt can also be used as a soldering iron because it comes with a folding iron stand, solder with solder, and a soldering iron tip.Voltage (V) 100 Rated Voltage 100V AC 50/60Hz Heater Nichrome heater
-
-
Filter by categories
