The running cost of the tip nozzle is low! Increased suction power by adopting a new piston mechanism. All alumite finish with excellent corrosion resistance. Automatic discharge function by cleaner shaft. Compact yet suction power equivalent to a cylinder capacity of 12cc! Flexible heat-resistan... Read More
Diameter x Length (Φmm x mm) 20×153 Trusco Part No. 368-8534 Mass (g) 52 Cylinder Capacity (cc) 9 RoHS directive (corresponding to 10 substances) Correspondence
Sure DS-520 is a compact desoldering tool that has a trowel, trowel temperature control circuit, motor, and diaphragm pump built into the gun-type body and can also remove SMD. By adopting a carbon-filled body, anti-static measures are perfect, and of course it is a 3-wire system (earth). Since t... Read More
Mass (g) 420 Ultimate Vacuum (mHg) 650 Trusco Part No. 127-7502 Type Electric suction type Setting Temperature (℃) 380-420 (continuously variable) Rating (at 50Hz - at 60Hz) 102V-120W (Heater 100W / Motor 12W) Iron Tip (Hole Diameter) (Φmm) 1 Exhaust Air (0PEN) (L/min) 15 Time to Reach Maximum Pressure 0.1
You can work while holding a soldering iron. Since it has a strong vacuum force, it easily absorbs solder.
For removing solder
* Do not use for anything other than its intended purpose.
A simple solder suction tool that is lightweight, economical, and has powerful suction power. Uses a cleaning shaft that allows the nozzle to be cleaned each time it is used. Easy nozzle replacement. No.18G and No.20G have a protective guard to prevent the piston part from hitting the face during... Read More
A solder suction device that integrates a heater and a suction tube. It can be operated with one hand and can be sucked up reliably. The solder in the through holes can be removed cleanly. It can also be used for lead-free solder with 45W power.
For removing solder when replacing parts, eliminati... Read More
Power Cable (m) 1.4～1.5 Highest Temperature (℃) About 400 Insulation Resistance (MΩ) over 100 Heater (W) 45 (Nichrome) Rated Voltage (V) AC100(50/60Hz) Trusco Part No. 819-5899 Mass (g) 180
Lightweight, economical, powerful, and absorbs molten solder with a powerful suction force. Self-cleaning shaft: Storage lock function that prevents nozzles from clogging: Convenient to carry and store (GS-100, GS-104 only) Deluxe type: Large suction capacity (GS-100 only)
The ease of use has been shaped. Achieves excellent operability and easy maintenance. The original sensor feedback system is adopted and the high-precision temperature control function is carried.
Resistance between ground (Nozzle) <2Ω Mass (kg) 0.52 2018 Trusco page 3 0516 Temperature Setting Range 350～500℃ Ultimate Vacuum Pressure 81kPa(610mmHg) Power Consumption 98W Power Supply AC100V 50/60Hz Heater Ceramic heater Vacuum Generation Method Diaphragm pump Nozzle Φ1mm (Part No.N61-08) Leakage Voltage (mV) ＜2
A small pencil type with outstanding portability. A high-performance solder sucker with an aluminum body that sucks molten solder with a strong suction force. With a cleaner shaft that automatically cleans the nozzle, there is no clogging of the solder even during continuous work, improving worka... Read More
The temperature control circuit and absorber mechanism are compactly integrated. Portable type that is convenient to carry. Built-in powerful small pump with ultimate vacuum of -0.08MPa (-600mmHg). The solder in the through holes can also be easily removed. The nozzle temperature can be freely se... Read More
Ultimate Vacuum -0.08MPa (-600mmHg) (typical value) Cable Length (m) 1.5 Insulation Resistance (MΩ) 100 or more (500V DC) Outer Dimensions (mm) 225×170 Temperature Setting Range (℃) 250～450 Power Cable 3-core cord (with ground pin plug) Trusco Part No. 305-9855 Mass (g) 470 (excluding code) Power Consumption (W) 65 Power Input (V) AC100(50/60Hz) Heater Sensor built-in ceramic heater Temperature Control Sensor field back ON-OFF control Specification Vacuum pump type / diaphragm type
Lightweight, economical, powerful, and absorbs molten solder with a powerful suction force. Nozzle uses antistatic material Self-cleaning shaft: Nozzle is hard to clog Storage lock function: Convenient to carry and store (GS-150, GS-154 only) Deluxe type: Large suction capacity (GS-150 only)
Uses a nozzle with integrated heater sensor. The heat recovery characteristics are dramatically improved. Digital type ensures temperature control. A type with a built-in vacuum pump that has an excellent rise in suction pressure. You can use it in two ways, gun type and straight type, by attachi... Read More
Station Output 24V Trusco Part No. 400-3772 Temperature Accuracy No-load ripple temperature ± 5 ° C Maximum Suction Flow (L/min) 15 Station Dimensions (mm) 160×120×225 Soldering Iron Power Consumption 70W(24V) Resistance (Ω) (Between nozzle ground) 2 or less Mass (kg) 3.7 Leakage Voltage (mV) 2 or less Hose Length (m) 12 Vacuum Generation Method Double cylinder type diaphragm pump Ultimate Vacuum Pressure 80kPa(600mmHg) Power Consumption (W) 120 Power Input (AC100V) 50/60Hz Control Temperature (℃) 200～450
High heat capacity solder sucker with built-in vacuum pump. With overwhelming power, it is possible to absorb solder from a high heat capacity and high heat dissipation board. Uses a trowel part with a quick change mechanism (trowel part / FR-4003). Improved suction work efficiency with unique fu... Read More
Ideal for lead-free solder removal A compact and multifunctional solder removal tool that can remove SMD parts with an integrated solder removal machine that has a motor, diaphragm vacuum pump, and chip temperature control circuit built into the iron section. Achieves low vibration and low noise ... Read More
Mass (g) 420 (Excluding code) Setting Temperature (℃) 350-500 (continuous possible) Type of Control Feedback zero cross method pump power consumption 120W Exhaust Air (L) 15 / min (at OPEN) Pump Diaphragm method Time to Reach Maximum Pressure 0.2 seconds Ultimate Vacuum 650mmHg Heater 100W ceramic Power Cable (m) 2P cord (grounding type) 1.8m Power Input (V) AC100(50/60Hz)
Nozzle / heater integrated nozzle with excellent heat recovery can be replaced with a single touch Used by connecting to an FM series station
* Mass and overall length are the values when the nozzle Φ1.00 mm is attached.
Overall Length (mm) 180 Temperature Setting Range 350～450℃ Cable Length (m) 1.2 Power Consumption 70W(24V) Mass (g) (Trowel) 65 Heater Composite heater Leakage Voltage (mV) ＜2 Resistance between Iron Tip and Ground (Ω) ＜2
Vacuum Generation Method Diaphragm method Voltage (V) 100 Temperature Setting Range (℃) 250～450 Power Cable (m) 1.5 (3-core cord / ground pin plug) Rated Voltage 100V AC 50/60Hz
You can freely set the temperature. Reduces temperature drop during work. You can easily remove the cartridge and replace the filter.
Working on precision printed circuit boards
Power Consumption (W) 110 Mass (kg) 2.9 Setting Temperature (℃) 250～450 Trusco Part No. 407-2596 Dimensions (Width x Depth x Height) (mm) 95×256×205 Power Input (V) AC100 Vacuum Generation Method Diaphragm method Heater Sensor built-in ceramic heater
Introducing an affordable low-priced type with a simple package for the popular solder remover. Since the pump and suction nozzle are directly connected, quick vacuum arrival time and instant strong suction are realized. Since it uses a high-power (100V / 100W) large-capacity ceramic heater, it i... Read More
Insulation Resistance (MΩ) 100 or more (400 degrees) Power Cable (m) 3P cord (grounding type) 1.8 Setting Temperature (℃) 350-500 degrees (continuously variable) Exhaust Air (L) 15 / min (at OPEN) Pump Diaphragm Time to Reach Maximum Pressure 0.2 seconds Heater (W) 100W sensor built-in ceramic Power Input (V) AC100V・50/60Hz Mass (g) 420 (not including code) Ultimate Vacuum (kPa) 86Kpa(650mmHg) Type of Control Feedback zero cross
Increase the degree of vacuum and suck at once. Uses a large-diameter pump that does not easily clog.
Solder removal.
Power Consumption (W) 170 Included Accessories Body, iron part, iron stand Power Input (V) AC100 Heater Ceramic heater Trusco Part No. 469-7081 Setting Temperature (℃) 360～480 Dimensions, Width W x Depth D x Height H (mm) 135×200×129 Mass (kg) 2.4
ENGINEER Desoldering IronThe running cost of the tip nozzle is low! Increased suction power by adopting a new piston mechanism. All alumite finish with excellent corrosion resistance. Automatic discharge function by cleaner shaft. Compact yet suction power equivalent to a cylinder capacity of 12cc! Flexible heat-resistan... Read MoreDiameter x Length (Φmm x mm) 20×153 Trusco Part No. 368-8534 Mass (g) 52 Cylinder Capacity (cc) 9 RoHS directive (corresponding to 10 substances) Correspondence
