Earth / Copper Bars
Shinohara Electric Earth BarSince the screw holes have been machined, there is no need to tap after purchase. As a copper bar for grounding of control panels, distribution boards, etc.Material (Main Unit) Copper plate RoHS directive (corresponding to 10 substances) Correspondence Finish Nickel plating finish- Shinohara Electric Earth Discharge RodSince the ground wire is built in the plastic pipe, it has excellent insulation and is safe. The ground wire and clip from the bottom of the pipe are provided with an insulating tube, so you can use it with confidence. Lightweight and easy to operate. We use a dangerous yellow pipe. Please use it... Read MoreLength (m) 0.5 Grounding Wire Length (m) 2 Diameter (Φmm) 32 Material (Pipe) PVC
-
- NITTO KOGYO Branch lead plate* Please note that the customer will be responsible for any in-house shipping charges for the delivery of this product.Material Body: copper RoHS directive (corresponding to 10 substances) Correspondence Surface Treatment Glossy tin platingfrom S$19.99Min. 2 days
- Shinohara Electric Crossover bar for relayDimension t (mm) 0.7 Capacity (A) 20 Material (Main Unit) Brass RoHS directive (corresponding to 10 substances) Correspondence
- NITTO KOGYO Earth Bar Set* Please note that the customer will be responsible for any in-house shipping charges for the delivery of this product.RoHS directive (corresponding to 10 substances) Correspondence Surface Treatment Glossy tin plating
- Kameda Denki Copper barA plated copper bar for busbars.Dimension L (mm) 1000 Material Copper plate, nickel plating finish RoHS directive (corresponding to 10 substances) Correspondencefrom S$53.99Min. 6 days
- NITTO KOGYO Secondary feed set (stair type)* Please note that the customer will be responsible for any in-house shipping charges for the delivery of this product.RoHS directive (corresponding to 10 substances) Correspondencefrom S$58.99Min. 2 days
- Shinohara Electric Crossover bar for slim breakerDimension t (mm) 2 Material (Main Unit) Copper strip RoHS directive (corresponding to 10 substances) Correspondencefrom S$38.99Min. 6 days
- Shinohara Electric Joint barMaterial (Main Unit) Copper RoHS directive (corresponding to 10 substances) Correspondence Finish Glossy tin-plated finishfrom S$19.99Min. 2 days
- NITTO KOGYO Earth terminalPlease use it as a ground terminal relay or extension. Since the mounting pitch is a multiple of 25mm, it can be mounted anywhere on the frame.Wall Thickness (mm) 4 Material Body: copper RoHS directive (corresponding to 10 substances) Correspondence Applicable cabinet (mm) FS、FZ、OFZ Surface Treatment Glossy tin plating Specification Mounting pitch is 75mm, M5from S$58.99Min. 2 days
- Shinohara Electric Crossing bar for distribution boardMaterial (Main Unit) Copper bar RoHS directive (corresponding to 10 substances) Correspondence Finish Nickel plating finish
- NITTO KOGYO Expansion earth barPlease use it to expand the ground terminal. This type is attached to the grounding terminal of the cabinet.Wall Thickness (mm) 2 Material Body: copper RoHS directive (corresponding to 10 substances) Correspondence Applicable cabinet (mm) For CL/CF/CN/SCL/SCF/SO-A Surface Treatment Glossy tin platingfrom S$38.99Min. 2 days
- NITTO KOGYO Earth bar setSurface Treatment (Glossy tin plating earth bar) Mass (kg) 0.6 Outer Dimension W (mm) 464.5 Outer Dimension H (mm) 50 Outer Dimension D (mm) 83 Material Copper (earth bar) t4.0 RoHS directive (corresponding to 10 substances) Correspondence Specification M5from S$97.99Min. 6 days
- Naigai Energering For branch bar agreement type breakerMaterial Copper Surface finish Nickel platingfrom S$64.99Min. 5 days
- NITTO KOGYO Grounding terminal unitScrew mounting and DIN rail mounting are possible. (Excluding BP46-400UG) Simply loosen the nut and slide the bar up and down to easily disconnect. It is possible to connect to the rear board with the bolt bottom knockout structure. (Bolt change is required.)RoHS directive (corresponding to 10 substances) Correspondence Material Resin part: Modified PPEfrom S$49.99Min. 7 days
- Shinohara Electric Crossover bar for switchRoHS directive (corresponding to 10 substances) Correspondence
-
- Shinohara Electric Branch mother copper barMaterial (Main Unit) Copper plate RoHS directive (corresponding to 10 substances) Correspondencefrom S$24.99Min. 9 days
- Shinohara Electric Crossover bar for relay (round terminal type)Dimension t (mm) 0.7 Material (Main Unit) Brass RoHS directive (corresponding to 10 substances) Correspondencefrom S$37.99Min. 9 days
- Ubon Tapped ground barPlease use it as a grounding bar for control panels, distribution boards, etc. Since the screw holes have been machined, there is no need to tap after purchase.Material Copper plate, nickel plating finishfrom S$24.99Min. 5 days
- NITTO KOGYO Branch lead plate (N type) for slim* Please note that the customer will be responsible for any in-house shipping charges for the delivery of this product.RoHS directive (corresponding to 10 substances) Correspondencefrom S$32.99Min. 7 days
- Naigai Energering Branch bar mounting screwMaterial Copper Surface finish Nickel platingfrom S$29.99Min. 5 days
- NITTO KOGYO ground wireMass (kg) 0.1 Outer Dimension L (mm) 230 RoHS directive (corresponding to 10 substances) Correspondencefrom S$64.99Min. 6 days
- NITTO KOGYO Lead lead bar (staircase type)A stepped bar holder for easy wiring. Can be easily attached to the breaker by combining main lead bars (BP35-SD6JS/6RJW/6LJW/10J/20J/20JH/40J) and copper bars. Can be used up to rated voltage AC200V. * Please note that the customer will be responsible for any in-house shipping charges for the de... Read MoreMaterial Body: copper RoHS directive (corresponding to 10 substances) Correspondence Surface Treatment Glossy tin platingfrom S$85.99Min. 7 days
- Shinohara Electric Crossing bar for push buttons (round terminal type)Dimension t (mm) 0.7 Material (Main Unit) Brass RoHS directive (corresponding to 10 substances) Correspondencefrom S$74.99Min. 9 days
- NITTO KOGYO Expansion barPlease use it for connecting the breaker and the bus bar. The combination of breaker and extension bar aligns the height of the bus bar. For panel cut height 68mm: Extension bar (BP41-60WD/125WD) For panel cut height 60mm: Extension bar (BP41-60W/125W)Material Body: copper RoHS directive (corresponding to 10 substances) Correspondence Surface Treatment Glossy tin platingfrom S$159.90Min. 7 days
- NITTO KOGYO Stair bar holder* Please note that the customer will be responsible for any in-house shipping charges for the delivery of this product.Set Contents 10 pieces Material Body: -, Barrier Holder: Modified PPE RoHS directive (corresponding to 10 substances) Correspondencefrom S$64.99Min. 7 days
- Shinohara Electric Crossing bar for terminal blockDimension t (mm) 0.7 Capacity (A) 20 Material (Main Unit) Brass RoHS directive (corresponding to 10 substances) Correspondencefrom S$149.90Min. 9 days
- Naigai Energering For branch bar branch compact breakerRated Current (A) 30 Material Copper Surface finish Nickel platingfrom S$87.99Min. 5 days
- NITTO KOGYO IPDS i unit-s (agreement type plug-in interior unit (eye saver type)) optional parts for incoming line, main lead bar coverProtects the front and sides of the main lead bar. * Please note that the customer will be responsible for any in-house shipping charges for the delivery of this product.from S$24.99Min. 8 days
- NITTO KOGYO Master 100A / 200A secondary feed setPlease use it for secondary feed of power board and control board. The main bar has a 20mm pitch and M5 screw holes. The secondary feed is the specification of electric wire wiring. Can be used up to rated voltage AC200V. * Please note that the customer will be responsible for any in-house shippi... Read MoreRoHS directive (corresponding to 10 substances) Correspondence Surface Treatment Glossy tin plating (copper) Panel cut dimensions (mm) for 68from S$119.90Min. 7 days
- NITTO KOGYO Branch lead plate (N type) for agreement typeRoHS directive (corresponding to 10 substances) Correspondencefrom S$35.99Min. 7 days
-
-
- NITTO KOGYO Wide barPlease use it for connecting the breaker and the bus bar. It is easy to expand the breaker terminal pitch. The incoming wire size can be increased by combining the bar holder/lug terminal type joint bar unit (BP34-LT-J) and the bar holder/lug terminal type/primary feed unit (BP34-LT-1).Material Body: copper RoHS directive (corresponding to 10 substances) Correspondence Surface Treatment Glossy tin plating Set Contents Wide bar LT, 1 each for R/S/T phasesfrom S$29.99Min. 7 days
- NITTO KOGYO Earth bar supportSet Contents 10 pieces RoHS directive (corresponding to 10 substances) Correspondencefrom S$38.99Min. 2 days
- Shinohara Electric Grounding terminal (screw type)Thickness (mm) 5 Material (Main Unit) Copper strip RoHS directive (corresponding to 10 substances) Correspondence Finish With nickel platingfrom S$149.90Min. 9 days
- Kameda Denki Main barThis is the main bar that has been processed as a branched copper bus for distribution boards. The continuous M5 tap hole is processed at a pitch of 25 mm, and a branch circuit can be easily assembled in combination with the crossover bar. There are 5 types of power supply capacities from 60A to ... Read MoreMaterial Copper plate, nickel plating finish RoHS directive (corresponding to 10 substances) Correspondencefrom S$97.99Min. 7 days
-
