Mounting Brackets

Please use it as a mounting bracket for the volume and toggle switch in the switchboard, control panel, and operation panel.

RoHS compliant. Please use it as a push button switch mounting bracket.

RoHS compliant. Please use it as a volume in the switchboard, control panel, operation panel, or as a mounting bracket for toggle switches.

It is a convenient mounting bracket for mounting the volume and various switches independently in the switchboard, control panel, and operation panel.

Simply cover it on the DIN rail and push the screw part with your finger to install it! Tighten the screw with a screwdriver to complete the fixing. There is no left-right orientation or hooking direction, so you don't have to worry about the orientation.

The ratchet gear allows for reliable band winding and can be firmly fixed to pipes and pillars. It can be removed and reused.

A metal fitting that floats parallel to the mounting surface to mount a terminal block, etc.

A metal fitting that attaches the noise filter to the DIN rail.

RoHS compliant. Please use it as a mounting base for volume and toggle switches.

It is a base for mounting noise filters, capacitors, regulated power supplies, resistors, sequencers, etc. on the DIN35 mm rail.

Use the UN-26 series as a joint for U-1 and U-26, and the UN-38 series as a joint for U-38 and L-40. The UN-40 series is very convenient when assembling a canagu three-dimensionally as a joint for the L-40W.

It is a metal fitting to attach various switches, volume, and pilot lamp independently. It is also possible to install 3 or more multiple units by combining 1 piece and 2 pieces. The switch mounting surface is wide so that the display name plate can be easily mounted.

Please use when attaching a plastic box to a concrete pillar.

(Part A) When attaching the Φ22 operation part to the panel, the tightening nut can be securely tightened. (Part B) Buttons and gloves can be attached and detached. (C part) Push lock The button can be attached and detached by turning the center of the large operation part.

Reliable winding is possible with the ratchet gear. Tightening the band is easy. It can be removed and reused.

* Please use as a set with the pole mounting bracket.

RoHS compliant. This auxiliary metal fitting is ideal for various uses and saving man-hours for assembly. If you use the auxiliary metal fittings in combination with the ABC channel, it is a convenient auxiliary metal fitting for mounting equipment, wiring ducts, and terminal boards.

Introducing a new lineup of Kanag for multi-angle connection! A secure connection is possible simply by inserting the multi-angle and fixing it with bolts. Since the hole width is larger than the conventional product, it is easier for bolts to pass through.

RoHS compliant. This auxiliary metal fitting is ideal for various uses and saving man-hours for assembly. If you use the auxiliary metal fittings in combination with the ABC channel, it is a convenient auxiliary metal fitting for mounting equipment, wiring ducts, and terminal boards.

* Please note that the customer will be responsible for any in-house shipping charges for the delivery of this product.

Please use it for temporary mounting of plastic boxes and mounting on walls.

Please use when installing communication equipment such as hubs, routers, and modems to the board of the cabinet. The height adjustment mechanism supports a wide range of equipment. * Please note that the customer will be responsible for any in-house shipping charges for the delivery of this prod... Read More

RoHS compliant. Please use it for mounting 48-square DIN standard equipment.

It can be fixed by simply wrapping it around a utility pole or pole and locking the fastener, making construction easy. The ratchet type fastener eliminates the need for special tools.

When crossover wiring of each terminal is required

RoHS compliant. It is the most suitable metal fitting for mounting the OMRON micro switch "panel mounting push button type". Since the mounting hole is a long hole, it can be finely adjusted according to the stroke of the actuator. (Approximately 12 mm when using M5 screws and flat wash... Read More

RoHS compliant. This auxiliary metal fitting is ideal for various uses and saving man-hours for assembly. If you use the auxiliary metal fittings in combination with the ABC channel, it is a convenient auxiliary metal fitting for mounting equipment, wiring ducts, and terminal boards.

Mounting bracket that replaces P and PAA series with PBA series.

A rail-shaped aluminum support bracket that conforms to the DIN standard. In addition to the terminal block unit, it can be attached to various devices. Since the surface is anodized, it is hard to be scratched and has a beautiful finish.

Made of polycarbonate, it is durable and beautiful. Installation and removal can be done easily with the attached dedicated hook.

Please use it for temporary mounting of the cabinet and mounting on the wall surface.