Connectors
The inlet / outlet is the part where the power plug is inserted to energize the electrical equipment. Some products include a power plug and connector. In addition to the general shape of the two terminals, there are variations from 1 to 4 and it is necessary to use the same shape as the plug. To prevent electric shock, it is covered with a material that does not conduct electricity, such as plastic. The color can be selected from white, black, silver, etc. according to the body.
Echo Electric (EDK) Inlet P SeriesWithstand Voltage No abnormality for 1 minute at AC2000V Rated Current (A) 10(UL)、15(CSA) Contact Resistance (mΩ) - Rated Voltage (V) 250 Insulation Resistance (MΩ) 100 or more (at 500 VDC)- Echo Electric (EDK) Receptacle (Outlet G series)Contact Resistance (mΩ) 30 or less Rated Voltage (V) 125 Pole arrangement Polar Rated Current (A) 15 Withstand Voltage No abnormality for 1 minute at AC2000V Insulation Resistance (MΩ) 100 or more (at 500 VDC)
-
-
- Meikosha Equipment installation dedicated inlet 2P 15A 125VIt is mainly used for 2P power supply machines and appliances, and supplies electricity using a power cord. Commercial vacuum cleaners, electric carts, special amplifiers, etc.Rated Voltage (V) 125 Rated Current (A) 15 Specification 2P, with mounting bracket Color Black RoHS directive (corresponding to 10 substances) Correspondence
-
-
-
-
-
-
- MASARU INDUSTRIES Outlet plateWhen wiring a cable drawn from a floor outlet with a wire protector, use it as an outlet cover for a clean finish. Since the cable outlet is processed according to the cross-sectional shape of the wire protector, it can be connected neatly to the wire protector. Double-sided tape is attached to t... Read MoreMaterial ABS RoHS directive (corresponding to 10 substances) Correspondencefrom S$8.79Min. 4 days
-
-
- Toshiba Lighting & Technology Cord connectorPower Supply 15A-125V Color Whitefrom S$3.29Min. 6 days
-
-
-
-
-
- Meikosha 2P 15A inlet (with mounting bracket)RoHS directive (corresponding to 10 substances) Correspondencefrom S$6.39Min. 6 days
- AMERICAN DENKI Hook type equipment outletIt is a device-only type outlet for supplying power that can be installed in machinery and equipment or in the panel with the minimum dimensions. It can be connected and mounted from either the front or back of the board. It is also ideal as a service outlet. The body is made of flame-retardant (... Read MoreMass (g) 42.8 Color Black Wire Connection Crimp terminal type Outlet Type Hook type Applicable crimp terminal R2-4 Standard RoHS compliant Flame Retardance UL94_V-0 Suitable Wire Φ1.6～2、2mm2from S$7.99Min. 7 days
- AMERICAN DENKI Hook type flange inletIt is a device that can be attached to mobile devices or devices that want to lose the power cable, and can be combined with the cord connector body to receive power. It is ideal for mobile blowers used in factories, catering vehicles in hospitals, and power receiving ports for showcases. The bod... Read MoreWire Connection Crimp terminal type, tightening type Outlet Type Hook type Applicable crimp terminal R5.5-5 Standard RoHS compliant Flame Retardance UL94_V-0 Suitable Wire Φ2～3.2、5.5mm2from S$49.99Min. 7 days
- AMERICAN DENKI Hook type flange inletIt is a device that can be attached to mobile devices or devices that want to lose the power cable, and can be combined with the cord connector body to receive power. It is ideal for mobile blowers used in factories, catering vehicles in hospitals, and power receiving ports for showcases. The bod... Read MoreSuitable Wire 14mm2 Wire Connection Crimp terminal type Outlet Type Hook type Applicable crimp terminal R14-6 Standard RoHS compliant Flame Retardance UL94_V-0from S$129.90Min. 7 days
-
-
-
- AMERICAN DENKI Hook type equipment outletIt is a device-only type outlet for supplying power that can be installed in machinery and equipment or in the panel with the minimum dimensions. It can be connected and mounted from either the front or back of the board. The body is made of flame-retardant (UL94 V-0) nylon resin, which has heat ... Read MoreMass (g) 23 Wire Connection Crimp terminal type Outlet Type Hook type Applicable crimp terminal R2-4 Standard RoHS compliant Flame Retardance UL94_V-0 Color White Suitable Wire Φ1.6～2、2mm2from S$11.99Min. 7 days
- Kawasaki Electric Wire AC inlet grayInsulation Thickness (mm) (Average) 0.80, (Minimum) 0.64 Color (Body) Gray, (Earth) Green / Yellow Conductor Resistance (Ω/km)(20℃) (Standard) 13.6, (Maximum) 14.7 Nominal Sectional Area (mm2) 1.25 Conductor Outer Diameter (Φmm) 1.5 Insulation Resistance 20℃(MΩ-km) 10 Rating 125V・15A Conductor Configuration (pcs/mm) 50/0.18A Insulation Outer Diameter (mm) About 3.1 RoHS directive (corresponding to 10 substances) Correspondence Material (Insulator) Vinylfrom S$87.99Min. 6 days
-
-
-
-
-
- Meikosha Grounding 3P20A hooking inletTrusco Part No. 735-9705 RoHS directive (corresponding to 10 substances) Correspondence Plug Shape Grounding 3P 20A 250V hook typefrom S$43.99Min. 6 days
-
- Meikosha 3P 20A grounding inletRoHS directive (corresponding to 10 substances) Correspondencefrom S$43.99Min. 6 days
-
-
- AMERICAN DENKI Hook type equipment outletIt is a device-only type outlet for supplying power that can be installed in machinery and equipment or in the panel with the minimum dimensions. It can be connected and mounted from either the front or back of the board. The body is made of flame-retardant (UL94 V-0) nylon resin, which has heat ... Read MoreMass (g) 23.1 Wire Connection Crimp terminal type Outlet Type Hook type Applicable crimp terminal R2-4 Standard RoHS compliant Flame Retardance UL94_V-0 Color White Suitable Wire Φ1.6～2、2mm2from S$9.89Min. 7 days
