It has two built-in tones that are easy to distinguish and are suitable for emergency notification. If there are two signal inputs at the same time, channel 1 has priority. (Peeping sound) It can be operated by turning the power switch ON / OFF.
Operating Temperature Range (℃) -10～60 Mass (kg) 0.1 Playback Channel 2 tones CH1: Peep Peep, CH2: Operating Humidity Range 85% or less Contact Input Type Power input method External Contact Capacity (mA) over 100
Thin design contributes to space saving of equipment Space saving design, depth only 19.9 mm Thin but up to 87dB (at 1m) It can be easily installed from the front without any special tools. It is equipped with a function that can reduce the sound by switching the signal input. You can rewrite mes... Read More
The popular small EL inverter unit "INV-60" and an EL plate that can be cut are included in the set! The emission color is the popular white. It also comes with a wiring agent for connecting the EL plate and an aluminum tape for processing the EL sheet terminals, so you can use it immed... Read More
Board dimensions (width W x depth D x height H) (mm) 33×40×14 Light Emitting Area (mm) About 52 × 149 Operating current (mA) About 55 Output Voltage Approx. 100 Vrms (± 15%) [RMS voltage] Output Frequency (Hz) Approx. 600 (± 15%) Terminal Block Corresponding wire / AWG26-16 Power Supply Voltage (V) DC12 (DC10.8 to 13.2 possible) Light Color White
Inverter (high voltage generation) board for EL plate light emission. Since the output voltage can be adjusted with the attached volume, it can be used with various large and small EL boards, and the brightness can be adjusted to your liking. It is also possible to turn it on automatically when i... Read More
Board dimensions (width W x depth D x height H) (mm) 79.4 × 60.3 × 33 (including solder part) Standby current Approx. 20 mA (when EL is off) Power Supply Voltage (V) DC12 Area (cm 2 ) Luminous / 70-400 Specification No case Operating current (mA) Up to 120
A small inverter (high voltage generation) unit for emitting light from an EL plate. Since it is a completed unit, you can easily emit light from the EL board just by connecting the power supply.
Board dimensions (width W x depth D x height H) (mm) 33 x 40 x 14 (including solder part) Operating current (mA) About 55 Output Voltage Approx. 100 Vrms (± 15%) [RMS voltage] Output Frequency (Hz) Approx. 600 (± 15%) Power Supply Voltage (V) DC12 (DC10.8 to 13.2 possible)
PATLITE Electronic sound alarm signal phone BM seriesIt has two built-in tones that are easy to distinguish and are suitable for emergency notification. If there are two signal inputs at the same time, channel 1 has priority. (Peeping sound) It can be operated by turning the power switch ON / OFF.Operating Temperature Range (℃) -10～60 Mass (kg) 0.1 Playback Channel 2 tones CH1: Peep Peep, CH2: Operating Humidity Range 85% or less Contact Input Type Power input method External Contact Capacity (mA) over 100
![EL inverter 60 [Completed PCB]](https://jp.images-monotaro.com/Monotaro3/pi/middle/mono08501264-141023-02.jpg)
