Microswitches

Stable sealing performance is ensured by using epoxy resin. Can be used in places exposed to water or dust. Automobiles, vending machines, refrigerators, ice machines, bathroom equipment, water heaters, air conditioners, industrial machinery, etc.

The breaking capacity is as large as 15A, and it is highly accurate. (Good repeatability) Basic type of micro switch.

Thermosetting case type V-15 / type V-10 type Can be used for applications such as cutting off current when opening and closing doors

A small basic switch that achieves high reliability while operating with an ultra-low load. Uses twin crossbar contacts to achieve excellent contact reliability. The unique internal mechanism ensures high contact contact force even in ultra-low load operation. Can be used for detection of light o... Read More

High contact force even at low load operation Can be used for light object detection, etc.

Ultra-compact and high durability of 30 million times Achieves high durability of 30 million times by adopting a simple and stable split two-spring spring. series Obtained safety standards such as UL, CSA, EN Soldering terminals

High precision and high durability due to the split 2-spring structure. Uses an integrally molded terminal structure that prevents the flux from crawling up.

Small basic switch that thoroughly pursues reliability and safety Can be used for applications such as current cutoff when opening and closing doors.

Ultra-small basic switch with abundant terminal variations High precision and high durability due to the split 2-spring structure. Uses an integrally molded terminal structure that prevents the flux from crawling up.

Demonstrates high reliability in minute load areas in bad atmosphere (dust, high humidity, silicon gas, etc.) Uses a reed switch inside the switch. Demonstrates high contact reliability in the minute load region. The mounting pitch is the same as the V small basic switch. High durability with a b... Read More

High-capacity basic switch with a current capacity of 20A and an inrush current of 75A. The outer shape is the same as the basic switch for general type Z except for the push button position, but it has the performance to withstand an inrush current of 75A.

It can be attached to the Z / A / X / DZ switch. It is for protecting the case of the basic switch and the terminal connection line, etc., and should be used to prevent short circuits between terminals due to accumulation of dust, disconnection due to grounding or vibration of the connection line... Read More

Highly reliable, light torque (0.5mN ・ m) rotary operation basic switch The 0.5A rated type uses a crossbar type gold alloy contact. Demonstrates contact reliability in the minute load region. A coil spring is used for the movable spring. High durability with more than 10 million mechanical times.

It is a convenient auxiliary metal fitting to be used when operating the micro switch with a cam or dog, or when transmitting mechanical movement that is not coaxial with the push button of the switch. The VAL series is suitable for operating microswitches with a rotating cam or sliding that is r... Read More

Wiring-saving with crimp connector terminals. As for the actuator, we have a lineup of plunger type and lever type. The crimp connector contributes to saving wiring and man-hours. The switch is a one-touch snap-fit type. Achieves a long stroke with a unique mechanism. RoHS compliant.

Long-life type doors and switches that use microswitches By attaching them to the opening and closing parts of electrical equipment, equipment, and doors of equipment in advance, it helps to prevent accidents safely and reliably. Since the basic switch is used for the built-in switch, the opening... Read More

Switch for opening and closing two independent circuits Opening and closing two circuits with different voltages, or controlling two independent circuits. The mounting hole dimensions, mounting pitch, and push button position are the same as the shape Z.

Ultra-small series with excellent flux resistance Adopts an integrally molded terminal structure that prevents flux from creeping up. The accuracy of the operating position (OP) is as high as ± 0.25 mm, making peripheral design and positioning easy. Uses a pin push button shape that facilitates o... Read More

Ultra-small and seal type Protective structure is JIS immersion type, IEC IP67 compliant. (However, excluding the terminal part) It can be used at an ambient temperature of -40 to + 85 ° C. Achieves high durability and high contact reliability by adopting gold alloy crossbar contacts and coil spr... Read More

Ultra-small basic switch with abundant terminal variations High precision and high durability due to the split 2-spring structure. Uses an integrally molded terminal structure that prevents the flux from crawling up.

Crimping connector terminals contribute to wiring and man-hour savings Crimping connectors can save wiring. Space saving is realized by pulling out the terminals horizontally. The actuator is available in two directions. The degree of freedom in mounting the switch is expanded. The mounting pitch... Read More

Thin snap action switch with a depth of 2.7 mm Despite its ultra-small size, it has a snap action mechanism and good electrical characteristics. Can be used in applications where strict space efficiency is required and high reliability is required.

A permanent magnet for enabling arc blowout is built into the DC current dedicated switch contact mechanism with a built-in magnetic blowout mechanism. The shape, mounting method, etc. are the same compact size as the basic switch for general use of type Z.

Maximum order quantity 100

The industry's smallest size, long stroke type that can be turned on and off firmly The body size is 78% of the conventional volume, contributing to the miniaturization of mechanical products. Long stroke specifications that are easy to use without a lever (OT reference value: 1.4 mm). Elimin... Read More

7A high capacity opening and closing is possible despite the ultra-small size Snap action switch capable of high capacity opening and closing (7A AC250V) despite the ultra-small size. Can be used as a control switch for applications that require strict space efficiency.

Power switch for doors with a contact gap of 3 mm or more Secures a contact gap of 3 mm or more required for power switches (standard type). Safety is taken into consideration by adopting a double return spring structure and a forced release structure. A series with a pull-on lock mechanism that ... Read More

One-touch mounting Large stroke cheat lock type available

For V size micro switch

HA68 / HA69 2-circuit type One-touch mounting Large stroke