Touch Switches

Multi-purpose tactile switch that detects objects from multiple directions Uses a slow-action switch mechanism. Gold-plated contacts for high contact reliability even with minute loads. Direct input to microcomputers, programmable controllers, etc. is possible. Three types with small outer diamet... Read More

Detects with a light touch, and the light emitting diode operates at the moment of contact, so the movement of the response is extremely small and highly accurate position detection is possible. It can detect minute displacements and lightweight objects without the need for operating force. Check... Read More

Touch from top to side and diagonally. Detection of objects passing from the side, etc. * Do not apply more than 20N to the contact part. * Do not push the ball support from the side with a force of 10N or more. * The corner that hits the ball is preferably R0.5 or higher.

Since a linear motion ball bearing is used for the bearing, it is suitable for sliding, declination, and offset.

The rotary lever slides against the detector and hits the declination, and a signal is output from the internal non-contact transmitter. The stroke can be changed by the lever length, and the contact force can be lowered. (Up to 0.1N) The contact portion can be changed according to the detector.

World's smallest class high-precision touch switch M5 x 17 mm, 1 μm repeatability 3 million times durability A small sensor with M5 or Φ5 and a length of 17 mm. The repeating accuracy (range) of the operating point can be selected from 1 μm / 3 μm.

The code protector has been abolished and the main unit has been made more compact. (Excluding CSJ) [Good operating point accuracy] Repeatability (range) of 5 μm / 3 μm / 10 μm. Judgment mistakes due to erroneous signals and chocolate stops can be reduced. [No difference] Continuous detection of ... Read More

Suitable for low height spaces. Since it is often used for machine tools that are subject to coolant and chips, boot protection without gaps is a typical specification. Can be equipped with an air blow pipe. Contact parallelism 0.01 mm. Contact diameter can be up to Φ10 plane. There is an overrun... Read More

The second version of Magne Limit, which is easier to use and smaller in size to meet market needs. For detecting the opening / closing of safety covers for production maintenance / inspection machines, etc., for detecting the opening / closing of closets and storage doors. * Please note that the... Read More

Mini switch. Effective for equipment in tight spaces and when miniaturization is required. The stroke is longer (1.5 mm) than the stopper mini STM with a switch. There is no stopper function. Since the waterproof type has a sealed structure, there will be a delay in returning when used at low tem... Read More

Significant cost reduction by not requiring a sequencer. The OK range can be adjusted.

[Good operating point accuracy] Repeatability of 0.5 μm / 2 μm (range) Judgment mistakes due to erroneous signals and chocolate stops can be reduced. [No difference] Continuous detection of minute displacement is possible. [No drift] There is no signal point drift due to power supply voltage and ... Read More

Since a linear bush is used for the bearing, it is suitable for sliding, declination, and offset. The switch part is a cartridge type. Replacement work can be done easily, and maintenance costs can be reduced. There is no need to worry about switch damage due to twisting of the cord when it is at... Read More

Since the contact ball rotates, it is suitable for detecting sliding parts. Since there is no difference, it can be used to determine the presence or absence of slight unevenness and the thickness of the sheet. Unlike the case of a micro switch with a difference and a proximity sensor, there is n... Read More