Mechanical & Electronic Parts Related Supplies
Board accessories are a general term for parts used to mount board wiring, resistors, capacitors, etc. There are various sizes and types, depending on the application, such as the components to be installed and the thickness of the wires. The ones that can be installed easily, such as ones that are designed so that the soldering iron does not directly hit the board, or those that can be installed simply by inserting into the holes in the board are popular. Signal checking terminals are widely used that can be easily removed after checking the signal.
Other Related Pages
- Sunhayato Copper-clad Laminate (Cut Substrate)A circuit board can be made by transferring lettering tape etc. directly to the copper foil surface and etching it.Wall Thickness (mm) 1.6
- Sunhayato Quick positive photosensitive substrateYou can finish it quickly with a short exposure. The fluctuation of the exposure time due to aging has been reduced. The pattern appears clearly during development. (There is almost no color change in the pattern part during exposure)Wavelength (nm) (Exposure) 300-450 (ghi line wavelength) Sensitivity (L/S)<200/200μm/μm Cell Spacing (mm) 2.54 Quality retention period 36 months Flame Retardance 94V-O (UL method) Appearance Exposure change / green → blue Pencil Hardness ≧2H
- Kyohritsu Electronic Industry Jumper Wire for BreadboardJumper wire (jump wire) set for assorted color breadboards. * Color may change depending on the lot.Type Others
- TAKACHI ELECTRONICS ENCLOSURE Bake plate VP seriesColor Natural color (brown) Type Others
- Sunhayato New breadboardThe circuit can be assembled simply by inserting the parts and lead wires. For circuit check / operation check of prototype circuit For experimentation of parts that are susceptible to heat to determine constants such as resistance of analog circuitResistance value (MΩ) 10 Capacitance 15PF or less (1MHz) Insulation Resistance (Ω) 1×109 Suitable Wire Diameter AWG#22～#30(Φ0.3～Φ0.8) Type Others Material (Terminal) Silver nickel alloy Current Capacity (A) Up to 3
- ELEKIT Super bright LEDA set of 5 ultra-bright green LEDs. Simply connect the batteries and the attached resistor to turn on the lamp.Current Consumption (mA) 15(typ.) Positioning Angle (°) 30 Recycled paper use mark Conformity RoHS directive (corresponding to 10 substances) Correspondence Rated Voltage (V) DC25 Power Supply Voltage (V) DC4.5～24 Type Others Rated Current (mA) Up to 30 Specification With resistor for 4.5-20V
- ELEKIT High brightness LEDSimply connect the batteries and the attached resistor to turn on the lamp.Positioning Angle (°) 30 Type Others
- Arduino Arduino Uno Rev3Arduino UNO Revision 3 (R3). Compared to the old UNO, IOREF pin is added to the side of RESET pin, and SDA pin / SCL pin is added to the side of AREF pin. The ATmega16U2 is installed in the USB interface, and the transfer speed of sketches has become even faster. The main chip uses AVR (ATmega328).Type Craft kit Analog input 6 Memory (Flash) 32K Operating Voltage 7～12V
- Sunhayato SOP IC Conversion Board without SocketIC package conversionWall Thickness (mm) 1 Land 2.54mm pitch 0.9Φ (outer) Type Both sides Material (Circuit Board) Glass epoxy Finish Through hole, gold plating, resist
- Sunhayato Oscilloscope check terminalThe oscilloscope probe is hooked from all directions. Easy color coding for each signal line.Finish Nickel base gold plating Type Others Material Phosphor bronze 0.4Φ
- Sunhayato Bake Board for WorkBake board for workWall Thickness (mm) 1 Type Others Material (Main Unit) Paper phenol base
- KYOHRITSU PRODUCTS 1 row 10P-1P × 10 QI cableA versatile cable that is convenient for input / output wiring for breadboards, evaluation boards, modules, etc. This is convenient when using the general-purpose 8-point LED display unit KP-LED8A / KP-KED8K. QI 10-pin housing ← → QI 1-pin plug x 10Specification 10P (Socket) -1P × 10 (Plug) Cable Length (cm) Approx. 20 (excluding connector) Type Others Cable UL1007AWG26from S$5.89Min. 2 days
- ELEKIT Super bright bulb type LED (for 8mm / 1.5V)Positioning Angle (°) 30 Recycled paper use mark Conformity RoHS directive (corresponding to 10 substances) Correspondence Operating Voltage Range (V) DC0.8～DC1.8 Suitable Size E10 Type Others
- K&H Small breadboardA breadboard that does not require soldering and completes the experimental circuit simply by inserting lead wires such as ICs, transistors, resistors, capacitors, and jump wires. * Jump wire sold separately.Cell Spacing (mm) 4 Number of Holes 390 Material (Circuit Board) ABS Circuit Board Dimensions, Length x Width (mm) 60×80 Type One side Wall Thickness (mm) 10
- Sunhayato Photosensitive substrate manufacturing supplies inkjet filmThis film is a high-resolution film for manufacturing photosensitive substrates with a special coating on the surface of PET film. You can easily create high-density pattern film with an inkjet printer. Comes with a test piece to check the optimum printing conditions. Creation of pattern film for... Read MoreOperating / Storage Temperature (℃) 10～35(10～60%RH) Thickness (μm) 200 or less Paper Size A4(210×297mm) Type Others
- Sunhayato SOP pitch conversion boardCell Spacing (mm) 0.65/1.27 Hole Diameter (Φmm) 0.9 Wall Thickness (mm) 1 Circuit Board Dimensions, Length x Width (mm) 10.16×12.7 Number of Pins 8 Type Both sides Material (Circuit Board) Glass composite Finish Through-hole, lead-free solder leveler
- Sunhayato Spacer for Raspberry PiBy using it in the mounting holes at the four corners of the Raspberry Pi B +, you can fix the expansion board or universal board. The spacer is a hexagonal male screw.Material (Main Unit) Brass nickel plating Type Others
- Sunhayato SMT connector conversion boardType Both sides Wall Thickness (mm) 1.2 Material (Circuit Board) Glass epoxy Circuit Board Dimensions, Length x Width (mm) 42.43×86.2from S$27.99Min. 2 days
- Sunhayato Developer for positive photosensitive substrateYou can use it immediately just by dissolving it in lukewarm water. It is also convenient for stock because it does not deteriorate unless it is opened. For developing positive photosensitive substrates.Type Others
- Sunhayato Adhesive board standAdhesive board stand that can easily fix the board to the case etc. The board can be fixed to the main body with M3 screwsSet Contents Eight deals, mounting screws (M3 x 5mm) Mass (g) 50 Specification Adhesive board stand Trusco Part No. 193-5081 Material Black ABS resin Outer Dimensions, Width W x Depth D x Height H (mm) 12.5×12.5×5from S$13.99Min. 2 days
- TAMIYA Seragris HGHigh-performance grease containing high-grade particles of boron nitride, which has excellent lubricity. It is attached to the gears, bearings, joints, etc. of moving models such as electric RC cars, mini 4WD, and fun work to smooth the movement and suppress wear. Aluminum tube with nozzle, 10g i... Read More
- Sunhayato Breadboard economy packA prototype circuit can be assembled simply by inserting parts such as ICs, resistors, capacitors, and jump wires, and soldering is not required, so parts will not be damaged. It is easy to insert and remove, and you can freely add parts and change circuits. Economy pack with 2 parts area and pow... Read MoreResistance 10mΩ Capacitance 15PF or less (1MHz) Outer Dimensions (mm) 173×65×9 Insulation Resistance (Ω) 1×109 Points 840 Current Capacity MAX3A Type Others Material (Terminal) Silver nickel alloy
- Sunhayato Jump wireA high-grade jump wire that uses nickel pins on both ends of the wire. It can be easily inserted and removed from the breadboard, it can be securely connected, and it can be bent freely. For creating circuits on breadboardsPin Diameter (Φmm) 0.6 Material (Wire Part) Copper nickel plating Material (Pin) Nickel Type Othersfrom S$5.39Min. 2 days
- Wonder Kit Solar Cells & Motors, PropellersThis is an experimental set with a polycrystalline silicon solar panel (cell voltage 0.6V x 2 in series), a solar panel motor (a motor with a smaller starting power than a general DC motor), and a propeller. With this set, you can experiment by converting light into electricity and rotating the m... Read MoreMaterial (Cell) Polycrystalline silicon Shaft Diameter (Φmm) (Measured value) 2 Panel Size (mm) (Measured value) Approx.W60 × D30 × t2.6 Operating Voltage (V) About 1.0 Open Voltage (V) About 1.2 Short Circuit Current (mA) About 170 Type Craft kit Current (mA) Operation / about 150
- 3M Low frequency noise suppression sheetIt is effective for noise countermeasures from DC to several hundred KHz, especially for magnetic noise. Since it is not necessary to ground it, it can be attached anywhere. It is thin, lightweight, flexible and can be punched. Easy to install because it comes with an adhesive. Measures against e... Read More
- Sunhayato Cast heater for ES-10A throw-in heater for jet-type desktop etching equipment. Compared to our conventional products, the temperature will be adjusted in a shorter time. A ceramic heater with an automatic temperature control function. The liquid temperature is efficiently controlled by using a ceramic heater with exc... Read MorePower Cable (m) 1.0 Power Consumption (W) 200 Control Temperature (℃) 30～45(±2.0) Outer Dimensions (mm) 60×35×105 Rated Voltage (V) AC100 50/60Hz Cable Length (m) For heater: 1.0 Type Others Heater Dimensions (mm) Φ16×165
- ELEKIT Super bright LED with cordSince it has a CRD (constant current diode), the lamp can be easily turned on by simply connecting a 4.5 to 24V power supply.Current Consumption (mA) 15(typ.) Forward voltage (V) 3.4 (typical at 20 mA) Positioning Angle (°) 30 Rated Voltage (V) DC25 Power Supply Voltage (V) DC4.5～24 Type Others Rated Current (mA) Up to 30
- Sunhayato Jump Wire KitIt can be easily inserted and removed from the breadboard and can be securely connected. Wiring can be done in close contact with the board, making it easy to check the circuit. For creating circuits on breadboards For creating circuits on universal boardsWire Rope Diameter (Φmm) 0.64(AWG-22) Type Others Insulation PVC Material Wire / phosphor bronze nickel platingfrom S$17.99Min. 2 days
- ELEKIT High brightness LED with cordSince it has a CRD (constant current diode), the lamp can be easily turned on by simply connecting a 4.5 to 24V power supply. (It glows even at DC3V, but it is a little darker than at 4.5V.)Current Consumption (mA) 15(typ.) Positioning Angle (°) 30 Rated Voltage (V) DC25 Power Supply Voltage (V) DC4.5～24 Type Others
- ELEKIT 2-core shielded wire (1m)A 2-core shielded wire that is convenient for wiring between board terminals and volumes.Length (m) 1 Number of Cores 2 cores (red / white) AWG28 (0.13 x 7) Recycled paper use mark Conformity Type Others
- Sunhayato Jump wire kitA single wire type that can be wired in close contact with the board and a twisted wire type jump wire that is easy to insert and remove are included in the set. A jump wire with a bagworm clip is also included. The number of wires has also been increased compared to conventional products. For cr... Read MoreType Others Insulation PVC
- Sunhayato Through-hole test wireThis is a test wire that allows you to input and check signals simply by inserting it into the through hole of the board. It is convenient for rewriting the firmware of a microcomputer and measuring waveforms. There are 5 colors of red, yellow, blue, white and black, 2 for each color, 10 in total.Suitable Diameter (Φmm) (Snow Hall) 0.9-1.0 Suitable Thickness of Workpiece (mm) 1.6 Rating 1A、125V、AC、DC Lead Wire Length (mm) 200 (AWG # 24 equivalent) Material (Contact) Brass / tin plating Type Othersfrom S$12.99Min. 2 days
- TAMIYA Universal Plate SetA high-strength ABS resin plate with 3 mm diameter holes drilled at 5 mm intervals. Various gearboxes, etc. that are available in a fun work series can be freely screwed. It can be widely used for automobile work frames and robot work frames.Specification / Size (mm) Plate/160×60×3
- Sunhayato Jump wire kitIt can be easily inserted and removed from the breadboard and can be securely connected. Wiring can be done in close contact with the board, making it easy to check the circuit.Wire Rope Diameter (Φmm) 0.64(AWG-22) Type Others Insulation PVC Material (Wire Part) Phosphor bronze nickel platingfrom S$63.99Min. 2 days
- Sunhayato Educational training tool jump wire kitIdeal for replenishing short jump wires that tend to run out. 2.54mm pitch, 10 types, 100 in total. Since it is a single wire type, it can be wired in close contact with the board.Type Others
- MAC8 Check terminal for oscilloprobeThe oscilloscope probe is hooked from all directions. * The two colors, red and yellow, contain cadmium regulated by RoHSs in the glass.Operating Temperature Range (℃) -40～+150 Type Othersfrom S$1.79Min. 2 days
- Sunhayato Teaching Training Tool Soldering Skill Practice SetWall Thickness (mm) 1.6 Circuit Board Dimensions, Length x Width (mm) 88.9×116.84 Material (Circuit Board) Glass compositefrom S$27.99Min. 2 days
- Wonder Kit Speaker 28mm 8Ω 1WIt is a small and thin speaker that supports 1W input.Frequency (Hz) (Resonance) 520±20%@1.0V Acceptable power (W) 1 Impedance (Ω) 8 Sound Pressure Level (dB) 90±3dB/0.1W Type Others Frequency range f0Hz～20KHz
- Sunhayato Replacement nozzle for cream solderTrusco Part No. 816-3351 Mass (g) 8
Filter by categories
