PCB Switches

Achieves a sharp click feeling and high durability. A convex plunger is available to which a key top (B32 series) can be attached.

The non-illuminated slide switch terminal part is insert-molded to prevent flux intrusion and terminal backlash, further improving contact stability. Since the movable contact piece is a two-sided sliding contact method, the self-cleaning effect and dual contact always provide stable quality and ... Read More

With a short stroke, light operation force, and light touch, it has a good feeling of operation. The height on the board is as thin as 5.08 mm, which contributes to the thinning of equipment. In addition, since the terminals are at inch pitch intervals (2.54 mm x n), high-density mounting is poss... Read More

Compatible with the B3F series and achieves high reliability due to the seal structure. Equivalent to IP67 (IEC-60529) seal structure ensures high contact reliability even in dusty places and around water. (Excluding the terminal part.) Two types are available: small and thin, 6 mm square and 12 ... Read More

A wide variety of key top sizes, shapes, and colors are available for the convex plunger type of B3F, B3FS, and B3W.

A standoff is provided to prevent flux from entering. Since the switch can be mounted continuously, the mounting density can be increased. The operation part has a clear and clear feeling. The molding material for the large stroke case with good operability and visibility is a UL-94-V0 certified ... Read More

A feeling of operation that is easy to break. The terminal shape is the same as the IC, and it has a "C" shape, so it does not float when attached to a PC board, can be temporarily fixed, and soldering work is easy. Since the switch contact part is hermetically sealed, there is no ingre... Read More

High quality and low price All molding ensures electrostatic withstand voltage of 12kV or more (at the tip of the knob). UL94V-0 certified product is used for the mold part, and it has excellent arc resistance, insulation, and self-extinguishing property. Since the insulation distance is 2.5 mm o... Read More

Board hole insertion terminal type contact part with abundant pole number specifications is gold-plated, twin contacts ensure high reliability with a self-cleaning mechanism by sliding. A lineup of types with washable sealing tape.

A standoff is provided to prevent flux from entering. Since the switch can be mounted continuously, the mounting density can be increased. The operation part has a clear and clear feeling. The molding material for the large stroke case with good operability and visibility is a UL-94-V0 certified ... Read More

Knife edge ・ Stable contact is achieved by the high pressure contact method. Since the contact pressure is 200kg / mm 2 , it will not malfunction due to vibration or shock. Since the terminal dimensions and shape are exactly the same as the IC, automatic installation work is possible. * The numb... Read More

Ultra-small slide switch with twin contact structure. The operation feeling is a clear feeling that does not make you aware of the ultra-small size by the switching mechanism using springs and steel balls. Since the contact part uses a sliding contact mechanism, self-cleaning is performed each ti... Read More

Good operation feeling. The terminal part is insert-molded to prevent flux intrusion and terminal backlash, further improving contact stability. Since the movable contact piece is a two-sided sliding contact method, the self-cleaning effect and dual contact always provide stable quality and high ... Read More

Surface mount terminal type reflow solder suitable for high-density mounting is possible.

A hinged shape for a sharp snap feel The hook type hinge mechanism provides a crisp snap feel. * The built-in LED lamp does not have a built-in limiting resistor, so be sure to connect the limiting resistor to the outside within the range.

Achieves high contact reliability with the knife edge structure Improves contact reliability by increasing the contact pressure with the knife edge structure. The knife edge structure allows cleaning without sealing tape. Heat resistance is further improved by using highly heat resistant resin. (... Read More

Uses a sliding twin crossbar contact mechanism. The manufacturer's unique switching moderation mechanism, which is a combination of a coil spring, a sliding rod, and a switching plate, provides reliable switching and a light operation feeling. Epoxy seals, etc. on the terminals prevent the in... Read More

A series of rotary type that can be selected according to the operation method with a seal type, a cone type that operates in two directions on the top and side, a shaft type that can be operated from the panel surface with a long shaft, and a flat type. Stable contact reliability is achieved by ... Read More

A standoff is provided to prevent flux from entering. Since the switch can be mounted continuously, the mounting density can be increased. The operation part has a clear and clear feeling. The molding material for the large stroke case with good operability and visibility is a UL-94-V0 certified ... Read More

Achieves the industry's thinnest class mounting height of 1.55 mm. By adopting half pitch (1.27mm), the mounting area is reduced by 63% (compared to the manufacturer's conventional product). The type with sealing tape can be washed.

DIP switch that achieves high reliability with a seal structure The seal structure IP64 (IEC-60529) equivalent prevents the ingress of flux and ensures high contact reliability even in dusty places and around water. A light operation feel due to the smooth switching mechanism. The contacts are go... Read More

Surface mount terminal type with improved solder heat resistance by renewing the conventional product (type A6S) Compatible with the conventional product (type A6S) and improved solder heat resistance with the same shape. (Soldering peak temperature: 260 ° C) The contacts are gold-plated, and the... Read More

Good operation feeling. Due to the manufacturer's unique illumination structure, constant bright and clear illumination can be obtained regardless of the operating position of the knob. The inch pitch of 2.54 mm is adopted as the pitch between terminals. Since the movable contact piece is a t... Read More

Low-cost type rotary DIP switch The rotor part has an O-ring sealed structure to prevent dust from entering. Easy circuit design.

The printed circuit board-mounted DIP digital attenuator (ATT) switch developed as the W series is a composite product that integrates the manufacturer's original knife edge high pressure contact structure and resistance network into an ultra-thin composite product with high precision. Guaran... Read More

High contact reliability. A twin contact clip mechanism is used for the contact part. Can be washed as a whole. Since the contact part is gold-plated, it is ideal for use in the minute current region. Improved operability. A light operation feeling is realized by an independent moderation mechanism.

By ultra-compact internal mechanism, half-pitch (P = 1.27mm) ultra-compact is realized. High-density mounting possible (41.9% area with 8 poles compared to our company) The contacts are gold-plated standard specifications. Automatic mounting, reflow and cleaning (by tape seal) by SMT mounter is p... Read More