Square Connectors

It has the same shape as the standard type D * N (using press contact) of the solder connection type, the shell is nickel-plated, and the front shell on the pin side is grounded dimples to ensure contact between the shells and provide a shielding effect. It is an enhanced EMI countermeasure type.

No special jig tools required, no wire pretreatment required. Easy and reliable batch pressure welding connector that just inserts the wire and crimps it with pliers. It enables relay connection of the wire with only male and female connectors, reducing the number of parts. Wide range of wire com... Read More

It is a fixing base that is attached to both ends of the connector and is connected to the male screw for fitting and fixing of the junction shell attached to the mating connector (cable side). Two fixing bases are required for one connector.

Soldered connection type connector using standard contacts (size # 20, rated current 5A) with solder pots.

A lightweight hood with a two-piece structure (split type) that is easy to assemble, with a unique step in the mating groove, which securely covers the connector flange and enhances the shielding effect.

"Industry standard product" of half-pitch I / O connector Low insertion / removal force and anti-pry measures that ensure high reliability by adopting MDR system preforce type cantilever contact Suitable for a wide range of cable sizes from AWG # 24 to # 30 Soldering connection method t... Read More

Soldered connection type connector using standard contacts (size # 20, rated current 5A) with solder pots.

"Industry standard" half-pitch I / O connector Compatible with MDR system soldering plugs and ordinary pressure-welded plugs Efficient shielding with a two-piece structure ground plate of the same shape that achieves both ease of assembly and strength * Jack screw M2.6 type is not compa... Read More

It is a fixing base (female screw) that is attached to both ends of the connector and is connected to the male screw for fitting and fixing of the junction shell attached to the mating connector (cable side). Two fixing bases are required for one connector. When ordering, please check the type of... Read More

A lightweight hood with a two-piece structure (split type) that is easy to assemble, with a unique step in the mating groove, which securely covers the connector flange and enhances the shielding effect. There are two types with nickel-plated finish, metal and plastic. There are two types of scre... Read More

It is a D □ U type EMI countermeasure type that is used by attaching a crimp type or through-hole contact for the board. Equipped with a manual crimping tool for easy wiring work and a semi-automatic crimping machine for a large amount of wiring. The contact (sold separately) can be inserted from... Read More

A low-priced, general-purpose angle type connector that thoroughly reduces costs as a through hole for printed circuit boards. The connector body and the bracket for fixing the board are lightweight with a plastic integrated structure.

A pair of male and female screw lock parts that are attached to both sides of the connector flange to secure the connectors to each other, and consist of a locking screw and a lock nut. * Two male and two female connectors are required for each set of connectors.

Double mechanism of screw and spring lock that can withstand any impact. Dustproof mechanism with excellent environmental friendliness. Optimal for miniaturization of equipment due to its robustness, small size, light weight, and high density. A relay type case is also available. FA control equip... Read More

FX1NC, FX2NC, FX3UC connector for input / output expansion block * Electric wires and crimping tools are not included, so please prepare them separately.

A monoblock type (integral structure) insulator that uses glass-filled dialial phthalate with excellent heat resistance, weather resistance, and dimensional stability. A highly reliable type that provides stable contact by wrapping beryllium copper around the contact part of the socket contact.

A cable sideways type has been added to the popular D sub-connector assembly type hood. The space behind the connector can be used effectively. The cable pull-out direction is horizontal. Achieves effective noise suppression with a metallized plastic hood.

It is a self-piercing type pressure welding connector that can connect all the cores at the same time with one touch without pretreatment such as stripping the insulation coating of the flat ribbon cable.

Wiring is a crimping type that is performed with a crimping tool that is easy to operate. Insert the connected contacts from the back of the insulator. The inserted contact is securely held by a metal clip built into the contact hole of the insulator. In case of circuit change or correction of in... Read More

EMI countermeasure type with the same shape as the angle type D □ UL standard material for connecting board through holes, low cost type). The pin side front shell has grounding dimples to ensure contact with the mating shell. (Material / Finish) Shell: Steel / Nickel plated, Insulator: Glass-fil... Read More

D sub-connector ideal for OA equipment interface Shielded connector for EMI countermeasures. Effective noise countermeasures are realized by using a metallized treated plastic hood. Compact and robust type with metal shell. Prepare various fixtures and grounding brackets.

Straight type D □ UL94V-0, black for board through-hole connection), Contact: Copper alloy / gold plating or contact part gold plating, connection part tin or tin alloy plating.

A through-hole type connector that is mounted directly on the circuit on the printed circuit board.