All Category

Terminal Block Boxes

View : Grid List
Filter

6 Item(s)

Set Ascending Direction
  1. TK agreement type terminal block
    NITTO KOGYO TK agreement type terminal block
    A contract-sized terminal block for distribution boards.
    Rated Insulation Voltage (V)  600  Specification  IEC rail mounting: Possible 
    from S$39.99
    Min. 7 days
  2. Terminal block
    NITTO KOGYO Terminal block
    from S$35.99
    Min. 7 days
  3. Connector terminal block (PCTL series)
    TOYOGIKEN Connector terminal block (PCTL series)
    Since the rated current has a large capacity, it is an interface that can be used in places with relatively high capacity such as power supply circuits and motor peripheral circuits.
    Operation Ambient Temperature (℃)  -15~+60  Insulation Resistance (MΩ)  100 or more (DC500V mega)  Standard tightening torque (N.m)  Terminal / 1.4  Compatible cable (mm2 Terminal / Maximum 2 
    Discontinued
  4. Connector terminal block (PRS series)
    TOYOGIKEN Connector terminal block (PRS series)
    Operation Ambient Temperature (℃)  -10~+50  Standard tightening torque (N.m)  0.8  Rated Current (A)  Insulation Resistance (MΩ)  100 / DC500V Mega  Withstand Voltage (V/min)  AC500  Rated Voltage (V)  DC24  Conformed Standard  JIS C2811  Compatible cable (mm2 Up to 1.25 
    Discontinued
  5. Connector terminal block (PCP series)
    TOYOGIKEN Connector terminal block (PCP series)
    By cutting only the mounting holes and the dimensions of the connector to take out the wires from the control box and to route the wires between the panels, the wires can be taken out more reliably with the connector with one touch. The terminal block is made into two stages to make it smaller.
    Operation Ambient Temperature (℃)  -15~+60  Rated Current (A)  Standard tightening torque (N.m)  1.4  Insulation Resistance (MΩ)  100 or more DC500V Mega  Withstand Voltage (V/min)  600  Rated Voltage (V)  AC、DC125  Compatible cable (mm2 Up to 2 
    Discontinued
  6. Connector terminal block (PCS series)
    TOYOGIKEN Connector terminal block (PCS series)
    No crimping required. Equipped with a 5mm pitch terminal block that contributes to the miniaturization of the unit. The terminal block has a finger-safe structure that prevents fingers from touching the threads. Supports both rail mounting and direct mounting. Of course, it can be attached to the... Read More
    Operation Ambient Temperature (℃)  -10~+50  Standard tightening torque (N.m)  0.6  Rated Current (A)  Compatible cable (mm2 1.25  Insulation Resistance (MΩ)  100 or more DC500V Mega  Withstand Voltage (V/min)  AC600  Rated Voltage (V)  AC、DC125 
    Discontinued
View : Grid List
Filter

6 Item(s)

Set Ascending Direction