All Category

Other Resins

View : Grid List
Filter

Items 1 - 40 of 473

Set Ascending Direction
  1. Angle, Chocolate Color
    Hikari Mold Angle, Chocolate Color
    It is widely used as a protective material and repair material for corners of the room.
    Color  Chocolate  Material  Rigid PVC 
    Rating:
    88%
    from S$0.86
    Min. 2 days
  2. Sunday sheet transparent
    ACRYSUNDAY Sunday sheet transparent
    You can see the light and the image on the other side as it is through the board. It is easy to process with scissors and a cutter, and it is resistant to bending and impact and does not burn easily, so it is suitable for display applications such as cut letters and signboards, stationery, and va... Read More
    Material  Hard PVC 
    Rating:
    85%
    from S$5.99
    Min. 2 days
  3. Hydrophilic Polyester Film
    AS ONE Hydrophilic Polyester Film
    Since it is a hydrophilically treated PET film, it is used in research and development of microchannel diagnostic chips that require fluidity.
    As ONE Part Number  3-6901-01  Type  9901P 10 sheets 
    from S$149.90
    Min. 2 days
  4. Resin punching
    OKUTANI Resin punching
    Array  60 ° staggered  Material  Polyvinyl chloride (PVC) 
    from S$329.90
    Min. 3 days
  5. 500x 600x50mm flexible polyurethane foam (4 sheets)
    ESCO 500x 600x50mm flexible polyurethane foam (4 sheets)
    Esco Part No.  EA997XM-50 
    from S$129.90
    Min. 6 days
  6. Ivory Square Bar
    Hikari Mold Ivory Square Bar
    It is a general-purpose mold material that is commonly used. It is used in a wide range of applications such as building materials.
    Length (mm)  1000  Material  Rigid PVC 
    Rating:
    98%
    from S$4.59
    Min. 2 days
  7. Black Angle
    Hikari Mold Black Angle
    It is widely used as a protective material and repair material for corners of the room.
    Color  Black  Material  Hard PS 
    Rating:
    82%
    from S$1.79
    Min. 2 days
  8. Transparent Pet Angle
    Hikari Mold Transparent Pet Angle
    It is widely used as a protective material and repair material for corners of the room.
    Material  Hard PET 
    Rating:
    89%
    from S$2.79
    Min. 2 days
  9. Moltofilter Black
    YAHATA NEJI Moltofilter Black
    Due to the three-dimensional structure of urethane foam, high porosity, and complete open cell structure, high dust collection rate can be obtained with low pressure loss, and excellent filtration performance is achieved compared to other filter materials. I have. Can be washed with water or a ne... Read More
    Density (kg/m3 30±5  Color  Black  Material  Urethane 
    Rating:
    88%
    from S$19.99
    Min. 2 days
  10. Polycare A70
    ACRYSUNDAY Polycare A70
    Antistatic spray. Use it for the finishing touches of plastic work and for plastic products such as fluorescent lamp covers. Air injection type. Post-injection shape (foam-like). No oil level remains after construction. * Do not use for electrical appliances, furniture, or metal. Do not use hard ... Read More
    Rating:
    93%
    from S$12.99
    Min. 2 days
  11. Acry Sunday cutter
    ACRYSUNDAY Acry Sunday cutter
    It is a cutter with few failures that is indispensable for straight cutting of acrylic boards, PVC boards, etc. and bending of PP craft sheets.
    Rating:
    80%
    from S$8.99
    Min. 2 days
  12. Flat mat Shiny mat PVC
    MonotaRO Flat mat Shiny mat PVC
    A glossy mat made of vinyl chloride that has excellent water resistance, oil resistance, and abrasion resistance. made in Japan. For floors in factories and construction sites. For curing floors such as the entrance of a house and a balcony. For curing floors in gymnasiums, public halls, event ve... Read More
    Material  Polyvinyl chloride (PVC)  Color  (Front) green, (back) black  Width (mm)  915  Thickness (mm)  1.5 
    Rating:
    100%
    from S$219.90
    Min. 2 days
  13. Paper base phenolic resin laminate
    Futamura Chemical Paper base phenolic resin laminate
    Has general electrical characteristics and is excellent in machinability. Electric machine parts such as switchboards, transformers and vehicles, jig materials such as bearings and gears
    Cleavage Strength (kN)  3.9~6.4  Specific Gravity  1.31~1.35  Izod Impact Strength (J/cm)  0.21~0.40  Bending Strength (MPa)  LW:120~200
    CW:110~180 
    JIS Standard  PL-PEM  Type  Cutting board  Rockwell Hardness  M scale: 110 ± 10  Material  Paper phenolic resin  Color  Natural color  Shape  Cutting board 
    Rating:
    84%
    from S$10.99
    Min. 2 days
  14. Triangular Adhesive Reinforcement Rod
    AS ONE Triangular Adhesive Reinforcement Rod
    Used for sticking to the inner corner where two boards are vertically bonded. Reinforcing rods widen the adhesive surface and increase strength.
    Dimension (mm)  3×3×1000 
    Rating:
    83%
    from S$2.29
    Min. 2 days
  15. Polystyrene sheet
    ACRYSUNDAY Polystyrene sheet
    It is several times stronger than glass. Moreover, it is less than half as light. It is hard to break, and even if it breaks, it does not become sharp pieces like glass, and it is light and easy to handle. It protects your privacy by blocking the eyesight from the outside while allowing sufficien... Read More
    Color  Misty pattern  Material  polystyrene 
    Rating:
    93%
    from S$16.99
    Min. 7 days
  16. White PS angle
    Hikari Mold White PS angle
    It is widely used as a protective material and repair material for corners of the room.
    Thickness (mm)  Material  Hard PS  Color  White 
    Rating:
    97%
    from S$2.59
    Min. 2 days
  17. Transparent PVC Punching Plate
    AS ONE Transparent PVC Punching Plate
    Material  PVC (polyvinyl chloride) 
    Rating:
    80%
    from S$7.99
    Min. 2 days
  18. Plastic board (for hobby)
    Hikari Plastic board (for hobby)
    Materials for model materials, displays, miscellaneous goods production, etc. Work material for DIY and hobby craft Low foam material, lightweight and resistant to water Can be easily cut with a cutter The material is polyethylene, so it can be recycled. Good printability and adhesiveness due to ... Read More
    Dimension (mm)  182×257  Size  B5  Material  Polystyrene 
    Rating:
    60%
    from S$5.39
    Min. 2 days
  19. Bakelite Board
    AS ONE Bakelite Board
    Dimension (mm)  495×495 
    Rating:
    100%
    from S$34.99
    Min. 2 days
  20. Transparent resin pipe Ekurika
    HOTTY POLYMER Transparent resin pipe Ekurika
    "Ecrica" is a product extruded by "Durabio ®;" manufactured by Mitsubishi Chemical Corporation, which has excellent transparency, weather resistance and surface characteristics. "Ecrica" is a resin with excellent transparency, scratch resistance, heat resistance, and... Read More
    Material  Engineering plastic (exterior)  Color  Transparent 
    Rating:
    40%
    from S$35.99
    Min. 2 days
  21. Round Resin Bar
    AS ONE Round Resin Bar
    Length (mm)  495  Color  Gray  Material  PVC 
    Rating:
    87%
    from S$9.59
    Min. 2 days
  22. Fabric Base Phenolic Resin Laminated Sheet
    Futamura Chemical Fabric Base Phenolic Resin Laminated Sheet
    It has moderate electrical characteristics and is excellent in mechanical strength and workability. Electromechanical parts and jig materials that require impact resistance
    Izod Impact Strength (J/cm)  0.50~1.00  Specific Gravity  1.32~1.36  Cleavage Strength (kN)  6.9~10.8  Type  Cutting board  Material  Cloth phenolic resin  Shape  Cutting board  Bending Strength (MPa)  LW:118~167
    CW:98~147 
    Rockwell Hardness  M scale: 115 ± 10  Color  Natural color  JIS Standard  PL-FLE 
    Rating:
    95%
    from S$13.99
    Min. 2 days
  23. POM-NC pipe
    Mitsubishi Chemical Advanced Materials (Former Polypenco) POM-NC pipe
    A highly crystalline engineering plastic material made from acetal copolymer. Has excellent mechanical strength. Widely used for load-bearing liners, wheels, rollers, etc. Fatigue resistance of polypenco acetal is superior to other engineering plastics. It is a highly reliable material for long-t... Read More
    Length Tolerance (mm)  0~+30.0  Length (mm)  1000  Surface Resistance (Ω)  1012  Type  POM-NC  Material  Polypen core acetal  Color  White 
    Rating:
    50%
    from S$43.99
    Min. 2 days
  24. Heater kit
    ACRYSUNDAY Heater kit
    A safe and easy-to-use heater rod developed exclusively for straight bending of acrylic sundae plates.
    Effective Width (mm)  400 
    Rating:
    90%
    from S$119.90
    Min. 2 days
  25. Polypropylene round bar
    KOKUGO Polypropylene round bar
    Length (mm)  1000  Material  PP (polypropylene) 
    Rating:
    100%
    from S$3.09
    Min. 6 days
  26. New Horel
    ACRYSUNDAY New Horel
    A heat transfer tool for acrylic. Engraving, curve cutting, heat welding, soldering, and drilling are possible (with 3 types of cutting edges)
    Voltage (V)  100  Effective Width (mm)  400  Power Consumption (W)  50  Dimension (mm)  75×290×30 
    Rating:
    80%
    from S$59.99
    Min. 2 days
  27. ABS black round bar
    KOKUGO ABS black round bar
    Material  ABS (B) (ABS Black)  Length (mm)  1000 
    Rating:
    80%
    from S$2.29
    Min. 6 days
  28. PS board
    Hikari PS board
    It is a plastic material that is convenient for work, processing, and cutting. Work material for DIY and hobby craft. The strength and luster are superior to those of Enbi board, and since it does not contain chlorine, dioxin is not generated even if it burns. Adhesive for DIY board can be used
    Thermal Deformation Temperature (℃)  About 73  Material  polystyrene 
    Rating:
    90%
    from S$3.89
    Min. 2 days
  29. Foam PP board white
    ACRYSUNDAY Foam PP board white
    It is also suitable as a packing material because it has moderate impact resistance and rigidity while having cushioning properties.
    Material  Polypropylene  Color  White 
    from S$7.49
    Min. 2 days
  30. Sunday sheet
    ACRYSUNDAY Sunday sheet
    It is suitable as a variety of work materials because it is easy to process with scissors and a cutter, and it is resistant to bending and impact and does not burn easily.
    Material  Enbi 
    from S$14.99
    Min. 7 days
  31. Expanded styrene board A1 size
    ACRYSUNDAY Expanded styrene board A1 size
    Not only screen printing, but also poster colors and water-based paints can be used to draw beautifully, making it ideal for crafts and teaching materials. [Nenchaku] A high-class tack board that uses special aluminum sand paper and is less likely to cause warping and blistering. Excellent compat... Read More
    Wall Thickness (mm)  Size  A1  Material  polystyrene 
    from S$74.99
    Min. 2 days
  32. Gray PS angle
    Hikari Mold Gray PS angle
    It is widely used as a protective material and repair material for corners of the room.
    Thickness (mm)  Color  Gray  Material  Hard PS 
    Rating:
    80%
    from S$2.59
    Min. 2 days
  33. Polystyrene glass mat board
    Hikari Polystyrene glass mat board
    Compared to other resins, it is more resistant to high humidity environments such as bathrooms, and there is almost no warpage due to moisture absorption. Contains UV agent with excellent durability. As a substitute for glass. Partitions, door panels, bathroom doors, etc.
    Material  Styrene resin  Color  Translucent (glass color)  Specification  With UV agent  Operating Temperature Range (℃)  ~88 
    Rating:
    96%
    from S$9.99
    Min. 2 days
  34. Resin punching board
    Hikari Resin punching board
    Punching board storage that can effectively use the wall surface You can store the washbasin / kitchen and the area around the entrance in a fashionable manner. (Sold separately) You can combine various parts and customize it to your liking (sold separately) * This product is a board only. Mounti... Read More
    Teeth Spacing  1 inch (about 2.54cm)  Hole Diameter (Φmm)  Material  Resin 
    from S$27.99
    Min. 2 days
  35. Pet Ace
    Hikari Pet Ace
    Considering environmental protection suitable for recycling Display, machine cover, general merchandise, POP, vacuum forming signboard Transparency is comparable to acrylic, impact resistance is close to polycarbonate, and workability and safety are also outstanding.
    from S$6.19
    Min. 6 days
  36. Styrene sheet mat
    ACRYSUNDAY Styrene sheet mat
    It is several times stronger than glass. Moreover, it is less than half as light. It is hard to break, and even if it breaks, it does not become sharp pieces like glass, and it is light and easy to handle. It protects your privacy by blocking the eyesight from the outside while allowing sufficien... Read More
    Color  Mat pattern  Material  polystyrene 
    Rating:
    100%
    from S$14.99
    Min. 7 days
  37. Sunday PET PG1
    ACRYSUNDAY Sunday PET PG1
    It is an eco-friendly, non-polluting plastic that uses polyester resin as a raw material and does not contain halogen substances (chlorine, bromine). It has high transparency and excellent impact resistance and workability. Signs, displays, price cards, storage cases, electronic component contain... Read More
    Color  Transparent 
    Rating:
    100%
    from S$5.39
    Min. 2 days
  38. Bakelite Cloth Base Round Bar
    KOKUGO Bakelite Cloth Base Round Bar
    Material  Bakelite fabric base material  Length (mm)  1000 
    Rating:
    80%
    from S$19.99
    Min. 6 days
  39. PVC Sheet
    Hikari PVC Sheet
    Chemical resistance, electrical insulation, flame retardancy. Sensitive to high and low temperatures. Signboards, plumbing pipes, films, lighting, electrical insulation, corrugated boards, displays, advertising boards, general merchandise, chemical storage
    Material  PVC  Length (mm)  300  Thermal Deformation Temperature (℃)  65~70  Thickness (mm)  Specific Gravity  1.4  Width (mm)  200 
    Rating:
    90%
    from S$9.79
    Min. 2 days
  40. Heat controller
    ACRYSUNDAY Heat controller
    A temperature controller that can be attached to the Acry Sunday heater kit. Acrylic processing It is not a necessary item, but if you use it for a long time, you can prevent the generation of air bubbles in the bent part by heating by adjusting the temperature, and you can perform more beautiful... Read More
    Voltage (V)  100  Power Consumption (W)  60  Dimension (mm)  605×90×30 
    Rating:
    100%
    from S$48.99
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 473

Set Ascending Direction